Depth of Flow given Hydraulic Radius in Rectangle Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth of Flow of Channel = Width of Section of Rect Channel*Hydraulic Radius of Rectangle/(Width of Section of Rect Channel-2*Hydraulic Radius of Rectangle)
Df = Brect*RH(rect)/(Brect-2*RH(rect))
This formula uses 3 Variables
Variables Used
Depth of Flow of Channel - (Measured in Meter) - Depth of Flow of Channel is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.
Width of Section of Rect Channel - (Measured in Meter) - Width of Section of Rect Channel is the width of the rectangular cross-section of the beam parallel to the axis in consideration.
Hydraulic Radius of Rectangle - (Measured in Meter) - Hydraulic Radius of Rectangle is the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.
STEP 1: Convert Input(s) to Base Unit
Width of Section of Rect Channel: 10.4 Meter --> 10.4 Meter No Conversion Required
Hydraulic Radius of Rectangle: 2.6 Meter --> 2.6 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Df = Brect*RH(rect)/(Brect-2*RH(rect)) --> 10.4*2.6/(10.4-2*2.6)
Evaluating ... ...
Df = 5.2
STEP 3: Convert Result to Output's Unit
5.2 Meter --> No Conversion Required
FINAL ANSWER
5.2 Meter <-- Depth of Flow of Channel
(Calculation completed in 00.020 seconds)

Credits

Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

12 Geometrical Properties of Rectangular Channel Section Calculators

Depth of Flow given Hydraulic Radius in Rectangle
Go Depth of Flow of Channel = Width of Section of Rect Channel*Hydraulic Radius of Rectangle/(Width of Section of Rect Channel-2*Hydraulic Radius of Rectangle)
Hydraulic Radius of Open Channel
Go Hydraulic Radius of Rectangle = (Width of Section of Rect Channel*Depth of Flow of Channel)/(Width of Section of Rect Channel+2*Depth of Flow of Channel)
Width of Section given Hydraulic Radius of Rectangle
Go Width of Section of Rect Channel = (2*Hydraulic Radius of Rectangle*Depth of Flow of Channel)/(Depth of Flow of Channel-Hydraulic Radius of Rectangle)
Depth of Flow given Section Factor for Rectangle Channel
Go Depth of Flow of Channel = (Section Factor of Rectangle/Width of Section of Rect Channel)^(2/3)
Depth of Flow given Wetted Perimeter for Rectangle
Go Depth of Flow of Channel = (Wetted Perimeter of Rectangle-Width of Section of Rect Channel)*0.5
Width of Section given Section Factor
Go Width of Section of Rect Channel = Section Factor of Rectangle/(Depth of Flow of Channel^1.5)
Depth of Flow given Wetted Area for Rectangle
Go Depth of Flow of Channel = Wetted Surface Area of Rectangle/Width of Section of Rect Channel
Width of Section given Wetted Areas
Go Width of Section of Rect Channel = Wetted Surface Area of Rectangle/Depth of Flow of Channel
Wetted Area for Rectangle
Go Wetted Surface Area of Rectangle = Width of Section of Rect Channel*Depth of Flow of Channel
Wetted Perimeter for Rectangular Section
Go Wetted Perimeter of Rectangle = Width of Section of Rect Channel+2*Depth of Flow of Channel
Width of Section given Perimeter
Go Width of Section of Rect Channel = Wetted Perimeter of Rectangle-2*Depth of Flow of Channel
Section Factor for Rectangle
Go Section Factor of Rectangle = Width of Section of Rect Channel*Depth of Flow of Channel^1.5

Depth of Flow given Hydraulic Radius in Rectangle Formula

Depth of Flow of Channel = Width of Section of Rect Channel*Hydraulic Radius of Rectangle/(Width of Section of Rect Channel-2*Hydraulic Radius of Rectangle)
Df = Brect*RH(rect)/(Brect-2*RH(rect))

What is Rectangular Channel?

Rectangular Channel is an open channel with a rectangular cross section. The flow routing through a Channel Connection is described in Analysis of Connections. Parameters to specify: Length, Slope, Manning's n, Diameter/Base Width, Height.

How to Calculate Depth of Flow given Hydraulic Radius in Rectangle?

Depth of Flow given Hydraulic Radius in Rectangle calculator uses Depth of Flow of Channel = Width of Section of Rect Channel*Hydraulic Radius of Rectangle/(Width of Section of Rect Channel-2*Hydraulic Radius of Rectangle) to calculate the Depth of Flow of Channel, Depth of Flow given Hydraulic Radius in Rectangle is defined as the flow height in channel measured from bed slope. Depth of Flow of Channel is denoted by Df symbol.

How to calculate Depth of Flow given Hydraulic Radius in Rectangle using this online calculator? To use this online calculator for Depth of Flow given Hydraulic Radius in Rectangle, enter Width of Section of Rect Channel (Brect) & Hydraulic Radius of Rectangle (RH(rect)) and hit the calculate button. Here is how the Depth of Flow given Hydraulic Radius in Rectangle calculation can be explained with given input values -> 5.2 = 10.4*2.6/(10.4-2*2.6).

FAQ

What is Depth of Flow given Hydraulic Radius in Rectangle?
Depth of Flow given Hydraulic Radius in Rectangle is defined as the flow height in channel measured from bed slope and is represented as Df = Brect*RH(rect)/(Brect-2*RH(rect)) or Depth of Flow of Channel = Width of Section of Rect Channel*Hydraulic Radius of Rectangle/(Width of Section of Rect Channel-2*Hydraulic Radius of Rectangle). Width of Section of Rect Channel is the width of the rectangular cross-section of the beam parallel to the axis in consideration & Hydraulic Radius of Rectangle is the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.
How to calculate Depth of Flow given Hydraulic Radius in Rectangle?
Depth of Flow given Hydraulic Radius in Rectangle is defined as the flow height in channel measured from bed slope is calculated using Depth of Flow of Channel = Width of Section of Rect Channel*Hydraulic Radius of Rectangle/(Width of Section of Rect Channel-2*Hydraulic Radius of Rectangle). To calculate Depth of Flow given Hydraulic Radius in Rectangle, you need Width of Section of Rect Channel (Brect) & Hydraulic Radius of Rectangle (RH(rect)). With our tool, you need to enter the respective value for Width of Section of Rect Channel & Hydraulic Radius of Rectangle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Depth of Flow of Channel?
In this formula, Depth of Flow of Channel uses Width of Section of Rect Channel & Hydraulic Radius of Rectangle. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Depth of Flow of Channel = Wetted Surface Area of Rectangle/Width of Section of Rect Channel
  • Depth of Flow of Channel = (Wetted Perimeter of Rectangle-Width of Section of Rect Channel)*0.5
  • Depth of Flow of Channel = (Section Factor of Rectangle/Width of Section of Rect Channel)^(2/3)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!