Depth of Water Drained Out Per Unit Area Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth of Water Drained out Per Unit Area = Depth of Water Applied from Unit Area-Consumptive Use
Dd = Di-Cu
This formula uses 3 Variables
Variables Used
Depth of Water Drained out Per Unit Area - (Measured in Meter) - Depth of water drained out per unit area.
Depth of Water Applied from Unit Area - (Measured in Meter) - Depth of water applied from unit area.
Consumptive Use - (Measured in Meter) - Consumptive use is the ratio of consumptive water use by the crop of irrigated farm and the irrigation water stored in the root zone of the soil on the farm.
STEP 1: Convert Input(s) to Base Unit
Depth of Water Applied from Unit Area: 150 Millimeter --> 0.15 Meter (Check conversion here)
Consumptive Use: 50 Millimeter --> 0.05 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Dd = Di-Cu --> 0.15-0.05
Evaluating ... ...
Dd = 0.1
STEP 3: Convert Result to Output's Unit
0.1 Meter -->10 Centimeter (Check conversion here)
FINAL ANSWER
10 Centimeter <-- Depth of Water Drained out Per Unit Area
(Calculation completed in 00.004 seconds)

Credits

Created by bhuvaneshwari
Coorg institute of technology (CIT), Kodagu
bhuvaneshwari has created this Calculator and 50+ more calculators!
Verified by Ayush Singh
Gautam Buddha University (GBU), Greater Noida
Ayush Singh has verified this Calculator and 100+ more calculators!

4 Reclamation of Saline and Alkaline Lands Calculators

Leaching Requirement of Soil
Go Leaching Requirement = Electrical Conductivity of Irrigation Water/Electrical conductivity of Drained Water
Consumptive Use given Total Irrigation Water Depth
Go Consumptive Use = Depth of Water Applied from Unit Area-Depth of Water Drained out Per Unit Area
Depth of Water Drained Out Per Unit Area
Go Depth of Water Drained out Per Unit Area = Depth of Water Applied from Unit Area-Consumptive Use
Total Irrigation Water Depth Applied
Go Depth of Water Applied from Unit Area = Consumptive Use+Depth of Water Drained out Per Unit Area

Depth of Water Drained Out Per Unit Area Formula

Depth of Water Drained out Per Unit Area = Depth of Water Applied from Unit Area-Consumptive Use
Dd = Di-Cu

How to check Ground Water Level?

The ground penetrating radar (GPR) system is used for underground water detection. GPR is a promising technology to detect and identify aquifer water or nonmetallic mines. One of the most serious components for the performance of GPR is the antenna system.

What is the difference between Depth and Height?

Depth is always measured in the downward direction, whereas height is always measured in the upward direction. Depth is mostly used in fields such as nautical engineering, geology and hydrodynamics.

How to Calculate Depth of Water Drained Out Per Unit Area?

Depth of Water Drained Out Per Unit Area calculator uses Depth of Water Drained out Per Unit Area = Depth of Water Applied from Unit Area-Consumptive Use to calculate the Depth of Water Drained out Per Unit Area, The Depth of Water Drained Out Per Unit Area formula is defined as the depth of water in cm or meters, to be removed in 24 hours from the drainage area. Depth of Water Drained out Per Unit Area is denoted by Dd symbol.

How to calculate Depth of Water Drained Out Per Unit Area using this online calculator? To use this online calculator for Depth of Water Drained Out Per Unit Area, enter Depth of Water Applied from Unit Area (Di) & Consumptive Use (Cu) and hit the calculate button. Here is how the Depth of Water Drained Out Per Unit Area calculation can be explained with given input values -> 1000 = 0.15-0.05.

FAQ

What is Depth of Water Drained Out Per Unit Area?
The Depth of Water Drained Out Per Unit Area formula is defined as the depth of water in cm or meters, to be removed in 24 hours from the drainage area and is represented as Dd = Di-Cu or Depth of Water Drained out Per Unit Area = Depth of Water Applied from Unit Area-Consumptive Use. Depth of water applied from unit area & Consumptive use is the ratio of consumptive water use by the crop of irrigated farm and the irrigation water stored in the root zone of the soil on the farm.
How to calculate Depth of Water Drained Out Per Unit Area?
The Depth of Water Drained Out Per Unit Area formula is defined as the depth of water in cm or meters, to be removed in 24 hours from the drainage area is calculated using Depth of Water Drained out Per Unit Area = Depth of Water Applied from Unit Area-Consumptive Use. To calculate Depth of Water Drained Out Per Unit Area, you need Depth of Water Applied from Unit Area (Di) & Consumptive Use (Cu). With our tool, you need to enter the respective value for Depth of Water Applied from Unit Area & Consumptive Use and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!