Total Irrigation Water Depth Applied Calculator

✖Consumptive use is the ratio of consumptive water use by the crop of irrigated farm and the irrigation water stored in the root zone of the soil on the farm.ⓘ Consumptive Use [C_u]			+10% -10%
✖Depth of water drained out per unit area.ⓘ Depth of Water Drained out Per Unit Area [D_d]			+10% -10%

✖Depth of water applied from unit area.ⓘ Total Irrigation Water Depth Applied [D_i]

⎘ Copy

👎

Formula

✖

Total Irrigation Water Depth Applied

Formula

`"D"_{"i"} = "C"_{"u"}+"D"_{"d"}`

Example

`"150mm"="50mm"+"10cm"`

Calculator

LaTeX

Reset

👍

Download Irrigation Engineering Formula PDF PDF Image

Total Irrigation Water Depth Applied Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Water Applied from Unit Area = Consumptive Use+Depth of Water Drained out Per Unit Area
D_i = C_u+D_d
This formula uses 3 Variables

Variables Used

Depth of Water Applied from Unit Area - (Measured in Meter) - Depth of water applied from unit area.
Consumptive Use - (Measured in Meter) - Consumptive use is the ratio of consumptive water use by the crop of irrigated farm and the irrigation water stored in the root zone of the soil on the farm.
Depth of Water Drained out Per Unit Area - (Measured in Meter) - Depth of water drained out per unit area.

STEP 1: Convert Input(s) to Base Unit

Consumptive Use: 50 Millimeter --> 0.05 Meter (Check conversion here)
Depth of Water Drained out Per Unit Area: 10 Centimeter --> 0.1 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_i = C_u+D_d --> 0.05+0.1

Evaluating ... ...

D_i = 0.15

STEP 3: Convert Result to Output's Unit

0.15 Meter -->150 Millimeter (Check conversion here)

FINAL ANSWER

150 Millimeter <-- Depth of Water Applied from Unit Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Irrigation Engineering » Water Logging & Reclamation of Saline Soils » Reclamation of Saline and Alkaline Lands » Total Irrigation Water Depth Applied

Credits

Created by bhuvaneshwari

Coorg institute of technology (CIT), Kodagu

bhuvaneshwari has created this Calculator and 50+ more calculators!

Verified by Ayush Singh

Gautam Buddha University (GBU), Greater Noida

Ayush Singh has verified this Calculator and 100+ more calculators!

< 4 Reclamation of Saline and Alkaline Lands Calculators

Leaching Requirement of Soil

Go Leaching Requirement = Electrical Conductivity of Irrigation Water/Electrical conductivity of Drained Water

Consumptive Use given Total Irrigation Water Depth

Go Consumptive Use = Depth of Water Applied from Unit Area-Depth of Water Drained out Per Unit Area

Depth of Water Drained Out Per Unit Area

Go Depth of Water Drained out Per Unit Area = Depth of Water Applied from Unit Area-Consumptive Use

Total Irrigation Water Depth Applied

Go Depth of Water Applied from Unit Area = Consumptive Use+Depth of Water Drained out Per Unit Area

Total Irrigation Water Depth Applied Formula

Depth of Water Applied from Unit Area = Consumptive Use+Depth of Water Drained out Per Unit Area
D_i = C_u+D_d

What is Depth of Irrigation?

The irrigation depth is the amount of water that needs to be applied to an irrigated system when soil water is reduced to the specified depletion level.

What is Intensity of Irrigation?

The intensity of irrigation is defined as the percentage of the culturable commanded area proposed to be irrigated annually. The yearly intensity of irrigation may be obtained by adding the intensity of irrigation for all the crop seasons.

How to Calculate Total Irrigation Water Depth Applied?

Total Irrigation Water Depth Applied calculator uses Depth of Water Applied from Unit Area = Consumptive Use+Depth of Water Drained out Per Unit Area to calculate the Depth of Water Applied from Unit Area, The Total Irrigation Water Depth Applied formula is defined as the total irrigation depth of water required by a certain crop in its entire growing period (150 days) is 25.92 cm. The culturable command area for a distributary channel is 100,000 hectares. Depth of Water Applied from Unit Area is denoted by D_i symbol.

How to calculate Total Irrigation Water Depth Applied using this online calculator? To use this online calculator for Total Irrigation Water Depth Applied, enter Consumptive Use (C_u) & Depth of Water Drained out Per Unit Area (D_d) and hit the calculate button. Here is how the Total Irrigation Water Depth Applied calculation can be explained with given input values -> 150000 = 0.05+0.1.

FAQ

What is Total Irrigation Water Depth Applied?

The Total Irrigation Water Depth Applied formula is defined as the total irrigation depth of water required by a certain crop in its entire growing period (150 days) is 25.92 cm. The culturable command area for a distributary channel is 100,000 hectares and is represented as D_i = C_u+D_d or Depth of Water Applied from Unit Area = Consumptive Use+Depth of Water Drained out Per Unit Area. Consumptive use is the ratio of consumptive water use by the crop of irrigated farm and the irrigation water stored in the root zone of the soil on the farm & Depth of water drained out per unit area.

How to calculate Total Irrigation Water Depth Applied?

The Total Irrigation Water Depth Applied formula is defined as the total irrigation depth of water required by a certain crop in its entire growing period (150 days) is 25.92 cm. The culturable command area for a distributary channel is 100,000 hectares is calculated using Depth of Water Applied from Unit Area = Consumptive Use+Depth of Water Drained out Per Unit Area. To calculate Total Irrigation Water Depth Applied, you need Consumptive Use (C_u) & Depth of Water Drained out Per Unit Area (D_d). With our tool, you need to enter the respective value for Consumptive Use & Depth of Water Drained out Per Unit Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search