Credits

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2600+ more calculators!

Diameter of rod of knuckle joint given its enlarged diameter near the joint Solution

STEP 0: Pre-Calculation Summary
Formula Used
Diameter of rod = Enlarged Diameter of Rod/1.1
d = D1/1.1
This formula uses 1 Variables
Variables Used
Enlarged Diameter of Rod - Enlarged Diameter of Rod is the diameter of the rod which is enlarged at the joints for the factor of safety consideration. (Measured in Millimeter)
STEP 1: Convert Input(s) to Base Unit
Enlarged Diameter of Rod: 35 Millimeter --> 0.035 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
d = D1/1.1 --> 0.035/1.1
Evaluating ... ...
d = 0.0318181818181818
STEP 3: Convert Result to Output's Unit
0.0318181818181818 Meter -->31.8181818181818 Millimeter (Check conversion here)
FINAL ANSWER
31.8181818181818 Millimeter <-- Diameter of rod
(Calculation completed in 00.000 seconds)

10+ Design of Knuckle Joint Calculators

Compressive stress in pin inside fork of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(2*(Thickess of Fork Eye of Knuckle Joint)*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given load and shear stress in pin
Diameter of Knuckle Pin = sqrt((2*Load on Knuckle Joint)/(pi*(Shear Stress in Pin))) Go
Diameter of rod of knuckle joint given tensile stress in rod
Diameter of rod = sqrt((4*Load on Knuckle Joint)/(pi*(Tensile Stress In Rod))) Go
Compressive stress in pin inside eye of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given compressive stress in eye end portion of pin
Diameter of Knuckle Pin = Load on Knuckle Joint/(Compressive Stress in Pin*Thickess of Eye of Knuckle Joint) Go
Length of pin of knuckle joint in contact with the eye end
Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin) Go
Shear stress in pin of knuckle joint given load and pin diameter
Shear Stress in Pin = (2*Load on Knuckle Joint)/(pi*(Diameter of Knuckle Pin^2)) Go
Tensile stress in rod of knuckle joint
Tensile Stress In Rod = (4*Load on Knuckle Joint)/(pi*(Diameter of rod^2)) Go
Diameter of rod of knuckle joint given its enlarged diameter near the joint
Diameter of rod = Enlarged Diameter of Rod/1.1 Go
Enlarged Diameter of rod of knuckle joint near the joint
Enlarged Diameter of Rod = 1.1*Diameter of rod Go

Diameter of rod of knuckle joint given its enlarged diameter near the joint Formula

Diameter of rod = Enlarged Diameter of Rod/1.1
d = D1/1.1

What is a Prismatic joint?

A prismatic joint provides a linear sliding movement between two bodies and is often called a slider, as in the slider-crank linkage. A prismatic pair is also called a sliding pair. A prismatic joint can be formed with a polygonal cross-section to resist rotation. The relative position of two bodies connected by a prismatic joint is defined by the amount of linear slide of one relative to the other one. This one parameter movement identifies this joint as one degree of freedom kinematic pair. Prismatic joints provide single-axis sliding often found in hydraulic and pneumatic cylinders.

How to Calculate Diameter of rod of knuckle joint given its enlarged diameter near the joint?

Diameter of rod of knuckle joint given its enlarged diameter near the joint calculator uses Diameter of rod = Enlarged Diameter of Rod/1.1 to calculate the Diameter of rod, The Diameter of rod of knuckle joint given its enlarged diameter near the joint is the diameter of the rod at the ends of the fork and eye of the knuckle joint. Diameter of rod is denoted by d symbol.

How to calculate Diameter of rod of knuckle joint given its enlarged diameter near the joint using this online calculator? To use this online calculator for Diameter of rod of knuckle joint given its enlarged diameter near the joint, enter Enlarged Diameter of Rod (D1) and hit the calculate button. Here is how the Diameter of rod of knuckle joint given its enlarged diameter near the joint calculation can be explained with given input values -> 31.81818 = 0.035/1.1.

FAQ

What is Diameter of rod of knuckle joint given its enlarged diameter near the joint?
The Diameter of rod of knuckle joint given its enlarged diameter near the joint is the diameter of the rod at the ends of the fork and eye of the knuckle joint and is represented as d = D1/1.1 or Diameter of rod = Enlarged Diameter of Rod/1.1. Enlarged Diameter of Rod is the diameter of the rod which is enlarged at the joints for the factor of safety consideration.
How to calculate Diameter of rod of knuckle joint given its enlarged diameter near the joint?
The Diameter of rod of knuckle joint given its enlarged diameter near the joint is the diameter of the rod at the ends of the fork and eye of the knuckle joint is calculated using Diameter of rod = Enlarged Diameter of Rod/1.1. To calculate Diameter of rod of knuckle joint given its enlarged diameter near the joint, you need Enlarged Diameter of Rod (D1). With our tool, you need to enter the respective value for Enlarged Diameter of Rod and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Diameter of rod?
In this formula, Diameter of rod uses Enlarged Diameter of Rod. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Diameter of rod = sqrt((4*Load on Knuckle Joint)/(pi*(Tensile Stress In Rod)))
  • Diameter of rod = Thickess of Eye of Knuckle Joint/1.25
  • Diameter of rod = Thickess of Fork Eye of Knuckle Joint/0.75
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!