Discharge considering Approach Velocity Solution

STEP 0: Pre-Calculation Summary
Formula Used
Francis Discharge = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Length of Weir Crest-0.1*Number of End Contraction*Still Water Head)*(Still Water Head^(3/2)-Velocity Head^(3/2))
QFr = (2/3)*Cd*sqrt(2*g)*(Lw-0.1*n*HStillwater)*(HStillwater^(3/2)-HV^(3/2))
This formula uses 1 Functions, 7 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Francis Discharge - (Measured in Cubic Meter per Second) - Francis Discharge is calculated from the empirical formula given by Francis.
Coefficient of Discharge - Coefficient of Discharge is ratio of Actual discharge to theoretical discharge.
Acceleration due to Gravity - (Measured in Meter per Square Second) - The Acceleration due to Gravity is acceleration gained by an object because of gravitational force.
Length of Weir Crest - (Measured in Meter) - Length of Weir Crest is the measurement or extent of Weir Crest from end to end.
Number of End Contraction - Number of End Contraction 1 can be described as the end contractions acting on a channel.
Still Water Head - (Measured in Meter) - Still Water Head is the head of water which is still over weir.
Velocity Head - (Measured in Meter) - Velocity Head is represented in the term of length unit, also referred to as kinetic head represents the kinetic energy of the fluid.
STEP 1: Convert Input(s) to Base Unit
Coefficient of Discharge: 0.66 --> No Conversion Required
Acceleration due to Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
Length of Weir Crest: 3 Meter --> 3 Meter No Conversion Required
Number of End Contraction: 4 --> No Conversion Required
Still Water Head: 6.6 Meter --> 6.6 Meter No Conversion Required
Velocity Head: 4.6 Meter --> 4.6 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
QFr = (2/3)*Cd*sqrt(2*g)*(Lw-0.1*n*HStillwater)*(HStillwater^(3/2)-HV^(3/2)) --> (2/3)*0.66*sqrt(2*9.8)*(3-0.1*4*6.6)*(6.6^(3/2)-4.6^(3/2))
Evaluating ... ...
QFr = 4.97184490717351
STEP 3: Convert Result to Output's Unit
4.97184490717351 Cubic Meter per Second --> No Conversion Required
FINAL ANSWER
4.97184490717351 4.971845 Cubic Meter per Second <-- Francis Discharge
(Calculation completed in 00.004 seconds)

Credits

Created by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has created this Calculator and 500+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

7 Discharge Calculators

Discharge considering Approach Velocity
Go Francis Discharge = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Length of Weir Crest-0.1*Number of End Contraction*Still Water Head)*(Still Water Head^(3/2)-Velocity Head^(3/2))
Discharge Passing over Weir considering Velocity
Go Francis Discharge with Suppressed End = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest*((Height of Water above Crest of Weir+Velocity Head)^(3/2)-Velocity Head^(3/2))
Discharge over Weir without considering Velocity
Go Francis Discharge with Suppressed End = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest*Height of Water above Crest of Weir^(3/2)
Discharge for Notch which is to be Calibrated
Go Francis Discharge with Suppressed End = Constant of Flow*Height of Water above Crest of Weir^Number of End Contraction
Discharge when End Contractions is suppressed and Velocity is considered
Go Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*(Still Water Head^(3/2)-Velocity Head^(3/2))
Discharge given Velocity Approach
Go Discharge by Approach Velocity = Velocity of Flow 1*(Width of Channel1*Depth of Flow)
Discharge when End Contractions is suppressed and Velocity is not considered
Go Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*Height of Water above Crest of Weir^(3/2)

Discharge considering Approach Velocity Formula

Francis Discharge = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Length of Weir Crest-0.1*Number of End Contraction*Still Water Head)*(Still Water Head^(3/2)-Velocity Head^(3/2))
QFr = (2/3)*Cd*sqrt(2*g)*(Lw-0.1*n*HStillwater)*(HStillwater^(3/2)-HV^(3/2))

What is Coefficient of Discharge?

Discharge Coefficient is the ratio of actual discharge through a nozzle or orifice to the theoretical discharge.

How to Calculate Discharge considering Approach Velocity?

Discharge considering Approach Velocity calculator uses Francis Discharge = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Length of Weir Crest-0.1*Number of End Contraction*Still Water Head)*(Still Water Head^(3/2)-Velocity Head^(3/2)) to calculate the Francis Discharge, Discharge considering approach velocity is a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass. Francis Discharge is denoted by QFr symbol.

How to calculate Discharge considering Approach Velocity using this online calculator? To use this online calculator for Discharge considering Approach Velocity, enter Coefficient of Discharge (Cd), Acceleration due to Gravity (g), Length of Weir Crest (Lw), Number of End Contraction (n), Still Water Head (HStillwater) & Velocity Head (HV) and hit the calculate button. Here is how the Discharge considering Approach Velocity calculation can be explained with given input values -> 4.971845 = (2/3)*0.66*sqrt(2*9.8)*(3-0.1*4*6.6)*(6.6^(3/2)-4.6^(3/2)).

FAQ

What is Discharge considering Approach Velocity?
Discharge considering approach velocity is a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass and is represented as QFr = (2/3)*Cd*sqrt(2*g)*(Lw-0.1*n*HStillwater)*(HStillwater^(3/2)-HV^(3/2)) or Francis Discharge = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Length of Weir Crest-0.1*Number of End Contraction*Still Water Head)*(Still Water Head^(3/2)-Velocity Head^(3/2)). Coefficient of Discharge is ratio of Actual discharge to theoretical discharge, The Acceleration due to Gravity is acceleration gained by an object because of gravitational force, Length of Weir Crest is the measurement or extent of Weir Crest from end to end, Number of End Contraction 1 can be described as the end contractions acting on a channel, Still Water Head is the head of water which is still over weir & Velocity Head is represented in the term of length unit, also referred to as kinetic head represents the kinetic energy of the fluid.
How to calculate Discharge considering Approach Velocity?
Discharge considering approach velocity is a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass is calculated using Francis Discharge = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Length of Weir Crest-0.1*Number of End Contraction*Still Water Head)*(Still Water Head^(3/2)-Velocity Head^(3/2)). To calculate Discharge considering Approach Velocity, you need Coefficient of Discharge (Cd), Acceleration due to Gravity (g), Length of Weir Crest (Lw), Number of End Contraction (n), Still Water Head (HStillwater) & Velocity Head (HV). With our tool, you need to enter the respective value for Coefficient of Discharge, Acceleration due to Gravity, Length of Weir Crest, Number of End Contraction, Still Water Head & Velocity Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!