Discharge given Formation Constant T Calculator

✖Formation Constant for Unsteady Flow is an equilibrium constant for the formation of a complex in solution.ⓘ Formation Constant for Unsteady Flow [F_c]			+10% -10%
✖Change in Drawdown is defined as the difference at the two wells.ⓘ Change in Drawdown [Δd]			+10% -10%

✖Discharge is the rate of flow of a fluid in unsteady flow.ⓘ Discharge given Formation Constant T [Q]

⎘ Copy

👎

Formula

✖

Discharge given Formation Constant T

Formula

Q = \frac{F c}{\frac{2.303}{4 \cdot π \cdot Δd}}

Example

1.004 m³/s = \frac{0.80 m²/s}{\frac{2.303}{4 \cdot π \cdot 0.23 m}}

Calculator

LaTeX

Reset

👍

Download Unsteady Flow Formulas PDF PDF Image

Discharge given Formation Constant T Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge = Formation Constant for Unsteady Flow/((2.303)/(4*pi*Change in Drawdown))
Q = F_c/((2.303)/(4*pi*Δd))
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a fluid in unsteady flow.
Formation Constant for Unsteady Flow - (Measured in Square Meter per Second) - Formation Constant for Unsteady Flow is an equilibrium constant for the formation of a complex in solution.
Change in Drawdown - (Measured in Meter) - Change in Drawdown is defined as the difference at the two wells.

STEP 1: Convert Input(s) to Base Unit

Formation Constant for Unsteady Flow: 0.8 Square Meter per Second --> 0.8 Square Meter per Second No Conversion Required
Change in Drawdown: 0.23 Meter --> 0.23 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = F_c/((2.303)/(4*pi*Δd)) --> 0.8/((2.303)/(4*pi*0.23))

Evaluating ... ...

Q = 1.00400008382201

STEP 3: Convert Result to Output's Unit

1.00400008382201 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

1.00400008382201 ≈ 1.004 Cubic Meter per Second <-- Discharge

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Unsteady Flow » Discharge in Well » Discharge given Formation Constant T

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Discharge in Well Calculators

Discharge given Time at 1st and 2nd Instance

Go Discharge = Change in Drawdown/((2.303*log((Time of Drawdown (t2) in Wells/Time of Drawdown (t1) in Wells),10))/(4*pi*Time in Hours for Well Discharge))

Discharge given Drawdown

Go Discharge = (4*pi*Formation Constant for Unsteady Flow*Total Drawdown in Well)/Well Function of u

Discharge given Formation Constant T

Go Discharge = Formation Constant for Unsteady Flow/((2.303)/(4*pi*Change in Drawdown))

Discharge given Formation Constant T Formula

Discharge = Formation Constant for Unsteady Flow/((2.303)/(4*pi*Change in Drawdown))
Q = F_c/((2.303)/(4*pi*Δd))

What is Discharge?

The amount of fluid passing a section of a stream in unit time is called the discharge. If v is the mean velocity and A is the cross sectional area, the discharge Q is defined by Q = Av which is known as volume flow rate.

How to Calculate Discharge given Formation Constant T?

Discharge given Formation Constant T calculator uses Discharge = Formation Constant for Unsteady Flow/((2.303)/(4*pi*Change in Drawdown)) to calculate the Discharge, Discharge given Formation Constant T formula is defined as a measure of the rate of fluid flow in an unsteady flow context, where the formation constant and other parameters are used to quantify the flow rate, providing valuable insights into the fluid's behavior and movement. Discharge is denoted by Q symbol.

How to calculate Discharge given Formation Constant T using this online calculator? To use this online calculator for Discharge given Formation Constant T, enter Formation Constant for Unsteady Flow (F_c) & Change in Drawdown (Δd) and hit the calculate button. Here is how the Discharge given Formation Constant T calculation can be explained with given input values -> 1.01655 = 0.8/((2.303)/(4*pi*0.23)).

FAQ

What is Discharge given Formation Constant T?

Discharge given Formation Constant T formula is defined as a measure of the rate of fluid flow in an unsteady flow context, where the formation constant and other parameters are used to quantify the flow rate, providing valuable insights into the fluid's behavior and movement and is represented as Q = F_c/((2.303)/(4*pi*Δd)) or Discharge = Formation Constant for Unsteady Flow/((2.303)/(4*pi*Change in Drawdown)). Formation Constant for Unsteady Flow is an equilibrium constant for the formation of a complex in solution & Change in Drawdown is defined as the difference at the two wells.

How to calculate Discharge given Formation Constant T?

Discharge given Formation Constant T formula is defined as a measure of the rate of fluid flow in an unsteady flow context, where the formation constant and other parameters are used to quantify the flow rate, providing valuable insights into the fluid's behavior and movement is calculated using Discharge = Formation Constant for Unsteady Flow/((2.303)/(4*pi*Change in Drawdown)). To calculate Discharge given Formation Constant T, you need Formation Constant for Unsteady Flow (F_c) & Change in Drawdown (Δd). With our tool, you need to enter the respective value for Formation Constant for Unsteady Flow & Change in Drawdown and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge?

In this formula, Discharge uses Formation Constant for Unsteady Flow & Change in Drawdown. We can use 2 other way(s) to calculate the same, which is/are as follows -

Discharge = (4*pi*Formation Constant for Unsteady Flow*Total Drawdown in Well)/Well Function of u
Discharge = Change in Drawdown/((2.303*log((Time of Drawdown (t2) in Wells/Time of Drawdown (t1) in Wells),10))/(4*pi*Time in Hours for Well Discharge))

Home

FREE PDFs

🔍 Search