Drop Time given Max Current Solution

STEP 0: Pre-Calculation Summary
Formula Used
Drop Time = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*Concentration at given time))^(6))
t = ((imax/(708*n*(D^(1/2))*(m^(2/3))*CA))^(6))
This formula uses 6 Variables
Variables Used
Drop Time - Drop Time is the time during when triangular impact pressure decreases from the highest to the lowest.
Maximum Diffusion Current - Maximum Diffusion Current is the maximum current that passes through a cell when the concentration of electro-active species at the electrode surface is zero.
Moles of Analyte - Moles of Analyte the quantity of an analyte in a sample that can be expressed in terms of moles.
Diffusion Constant - Diffusion Constant also known as the diffusion coefficient or diffusivity, is a physical constant that measures the rate of material transport.
Rate of Flow of Mercury - Rate of Flow of Mercury the volume of mercury that passes through a cross-section each second.
Concentration at given time - Concentration at given time is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.
STEP 1: Convert Input(s) to Base Unit
Maximum Diffusion Current: 10 --> No Conversion Required
Moles of Analyte: 3 --> No Conversion Required
Diffusion Constant: 4 --> No Conversion Required
Rate of Flow of Mercury: 3 --> No Conversion Required
Concentration at given time: 10 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
t = ((imax/(708*n*(D^(1/2))*(m^(2/3))*CA))^(6)) --> ((10/(708*3*(4^(1/2))*(3^(2/3))*10))^(6))
Evaluating ... ...
t = 2.10091234346782E-24
STEP 3: Convert Result to Output's Unit
2.10091234346782E-24 --> No Conversion Required
FINAL ANSWER
2.10091234346782E-24 2.1E-24 <-- Drop Time
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Torsha_Paul
University of Calcutta (CU), Kolkata
Torsha_Paul has created this Calculator and 200+ more calculators!
Verifier Image
Verified by Soupayan banerjee
National University of Judicial Science (NUJS), Kolkata
Soupayan banerjee has verified this Calculator and 900+ more calculators!

Potentiometry and Voltametry Calculators

Area of Electrode
​ LaTeX ​ Go Area of Electrode = (Cathodic Current/(2.69*(10^8)*Number of electrons given CI*Concentration given CI*(Diffusion Constant^0.5)*(Sweep Rate^0.5)))^(2/3)
Applied Potential
​ LaTeX ​ Go Applied Potential in Potentiometry = Cell Potential in Potentiometry+(Current in Potentiometry*Resistance in Potentiometry)
Anodic Potential
​ LaTeX ​ Go Anodic Potential = Cathodic Potential+(57/Moles of Electron)
Anodic Potential given half potential
​ LaTeX ​ Go Anodic Potential = (Half Potential/0.5)-Cathodic Potential

Drop Time given Max Current Formula

​LaTeX ​Go
Drop Time = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*Concentration at given time))^(6))
t = ((imax/(708*n*(D^(1/2))*(m^(2/3))*CA))^(6))

What is the importance of polarography?

Polarography is an electrochemical voltammetric technique that employs (dropping or static) mercury drop as a working electrode. In its most simple form polarography can be used to determine concentrations of electroactive species in liquids by measuring their mass-transport limiting currents.

How to Calculate Drop Time given Max Current?

Drop Time given Max Current calculator uses Drop Time = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*Concentration at given time))^(6)) to calculate the Drop Time, The Drop Time given Max Current formula is defined as the time during when triangular impact pressure decreases from the highest to the lowest. Drop Time is denoted by t symbol.

How to calculate Drop Time given Max Current using this online calculator? To use this online calculator for Drop Time given Max Current, enter Maximum Diffusion Current (imax), Moles of Analyte (n), Diffusion Constant (D), Rate of Flow of Mercury (m) & Concentration at given time (CA) and hit the calculate button. Here is how the Drop Time given Max Current calculation can be explained with given input values -> 2.1E-24 = ((10/(708*3*(4^(1/2))*(3^(2/3))*10))^(6)).

FAQ

What is Drop Time given Max Current?
The Drop Time given Max Current formula is defined as the time during when triangular impact pressure decreases from the highest to the lowest and is represented as t = ((imax/(708*n*(D^(1/2))*(m^(2/3))*CA))^(6)) or Drop Time = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*Concentration at given time))^(6)). Maximum Diffusion Current is the maximum current that passes through a cell when the concentration of electro-active species at the electrode surface is zero, Moles of Analyte the quantity of an analyte in a sample that can be expressed in terms of moles, Diffusion Constant also known as the diffusion coefficient or diffusivity, is a physical constant that measures the rate of material transport, Rate of Flow of Mercury the volume of mercury that passes through a cross-section each second & Concentration at given time is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.
How to calculate Drop Time given Max Current?
The Drop Time given Max Current formula is defined as the time during when triangular impact pressure decreases from the highest to the lowest is calculated using Drop Time = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*Concentration at given time))^(6)). To calculate Drop Time given Max Current, you need Maximum Diffusion Current (imax), Moles of Analyte (n), Diffusion Constant (D), Rate of Flow of Mercury (m) & Concentration at given time (CA). With our tool, you need to enter the respective value for Maximum Diffusion Current, Moles of Analyte, Diffusion Constant, Rate of Flow of Mercury & Concentration at given time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Drop Time?
In this formula, Drop Time uses Maximum Diffusion Current, Moles of Analyte, Diffusion Constant, Rate of Flow of Mercury & Concentration at given time. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Drop Time = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*Concentration at given time))^(6))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!