Elevation given Velocity at Desired Elevation Solution

STEP 0: Pre-Calculation Summary
Formula Used
Desired Elevation = 10*(Velocity at the desired elevation z/Wind Speed at Height of 10 m)^1/0.11
z = 10*(Vz/V10)^1/0.11
This formula uses 3 Variables
Variables Used
Desired Elevation - (Measured in Meter) - Desired Elevation to obtain the velocity at the desired height.
Velocity at the desired elevation z - (Measured in Meter per Second) - Velocity at the desired elevation z [length/time] depends on the wind speed at a height of 10m and the desired elevation.
Wind Speed at Height of 10 m - (Measured in Meter per Second) - Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration.
STEP 1: Convert Input(s) to Base Unit
Velocity at the desired elevation z: 26.5 Meter per Second --> 26.5 Meter per Second No Conversion Required
Wind Speed at Height of 10 m: 22 Meter per Second --> 22 Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
z = 10*(Vz/V10)^1/0.11 --> 10*(26.5/22)^1/0.11
Evaluating ... ...
z = 109.504132231405
STEP 3: Convert Result to Output's Unit
109.504132231405 Meter --> No Conversion Required
FINAL ANSWER
109.504132231405 109.5041 Meter <-- Desired Elevation
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

25 Mooring Forces Calculators

Latitude given Velocity at Surface
Go Latitude of the line = asin((pi*Shear Stress at the Water Surface/Velocity at the Surface)^2/(2*Depth of Frictional Influence*Density of Water*Angular Speed of the Earth))
Angular velocity of Earth for velocity at surface
Go Angular Speed of the Earth = (pi*Shear Stress at the Water Surface/Velocity at the Surface)^2/(2*Depth of Frictional Influence*Density of Water*sin(Latitude of the line))
Density of Water given Velocity at Surface
Go Density of Water = (pi*Shear Stress at the Water Surface/Velocity at the Surface)^2/(2*Depth of Frictional Influence*Angular Speed of the Earth*sin(Latitude of the line))
Depth given Velocity at Surface
Go Depth of Frictional Influence = (pi*Shear Stress at the Water Surface/Velocity at the Surface)^2/(2*Density of Water*Angular Speed of the Earth*sin(Latitude of the line))
Velocity at Surface given Shear Stress at Water Surface
Go Velocity at the Surface = pi*Shear Stress at the Water Surface/(2*Depth of Frictional Influence*Water Density*Angular Speed of the Earth*sin(Latitude of the line))
Angle of Current Relative to Longitudinal Axis of Vessel given Reynolds Number
Go Angle of the Current = acos((Reynolds Number(pb)*Kinematic Viscosity)/(Average Current Speed*Waterline Length of a Vessel))
Kinematic Viscosity of Water given Reynolds Number
Go Kinematic Viscosity = (Average Current Speed*Waterline Length of a Vessel*cos(Angle of the Current))/Reynolds Number
Waterline Length of Vessel given Reynolds Number
Go Waterline Length of a Vessel = (Reynolds Number*Kinematic Viscosity)/Average Current Speed*cos(Angle of the Current)
Average Current Speed given Reynolds number
Go Average Current Speed = (Reynolds Number*Kinematic Viscosity)/Waterline Length of a Vessel*cos(Angle of the Current)
Wind Speed at Standard Elevation of 10 m above Water's Surface using Drag Force due to Wind
Go Wind Speed at Height of 10 m = sqrt(Drag Force/(0.5*Air Density*Drag Coefficient*Projected Area of the Vessel))
Displacement of Vessel for Wetted Surface Area of Vessel
Go Displacement of a Vessel = (Vessel Draft*(Wetted Surface Area of Vessel-(1.7*Vessel Draft*Waterline Length of a Vessel)))/35
Wetted Surface Area of Vessel
Go Wetted Surface Area of Vessel = (1.7*Vessel Draft*Waterline Length of a Vessel)+((35*Displacement of a Vessel)/Vessel Draft)
Waterline Length of Vessel for Wetted Surface Area of Vessel
Go Waterline Length of a Vessel = (Wetted Surface Area of Vessel-(35*Displacement of a Vessel/Vessel Draft))/1.7*Vessel Draft
Mass Density of Air given Drag Force due to Wind
Go Density of Air = Drag Force/(0.5*Drag Coefficient*Projected Area of the Vessel*Wind Speed at Height of 10 m^2)
Coefficient of Drag for Winds Measured at 10 m given Drag Force due to Wind
Go Drag Coefficient = Drag Force/(0.5*Air Density*Projected Area of the Vessel*Wind Speed at Height of 10 m^2)
Projected Area of Vessel above Waterline given Drag Force due to Wind
Go Projected Area of the Vessel = Drag Force/(0.5*Air Density*Drag Coefficient*Wind Speed at Height of 10 m^2)
Drag Force due to Wind
Go Drag Force = 0.5*Air Density*Drag Coefficient*Projected Area of the Vessel*Wind Speed at Height of 10 m^2
Total Longitudinal Current Load on Vessel
Go Total Longitudinal Current Load on a Vessel = Form Drag of a Vessel+Skin Friction of a Vessel+Vessel Propeller Drag
Waterline Length of Vessel given Expanded or Developed Blade Area
Go Waterline Length of a Vessel = (Expanded or Developed blade area of a propeller*0.838*Area Ratio)/Vessel Beam
Vessel Beam given Expanded or Developed Blade Area of Propeller
Go Vessel Beam = (Expanded or Developed blade area of a propeller*0.838*Area Ratio)/Waterline Length of a Vessel
Area Ratio given Expanded or Developed Blade Area of Propeller
Go Area Ratio = Waterline Length of a Vessel*Vessel Beam/(Expanded or Developed blade area of a propeller*0.838)
Expanded or Developed Blade Area of Propeller
Go Expanded or Developed blade area of a propeller = (Waterline Length of a Vessel*Vessel Beam)/0.838*Area Ratio
Elevation given Velocity at Desired Elevation
Go Desired Elevation = 10*(Velocity at the desired elevation z/Wind Speed at Height of 10 m)^1/0.11
Wind Speed at Standard Elevation of 10 m given Velocity at Desired Elevation
Go Wind Speed at Height of 10 m = Velocity at the desired elevation z/(Desired Elevation/10)^0.11
Velocity at Desired Elevation Z
Go Velocity at the desired elevation z = Wind Speed at Height of 10 m*(Desired Elevation/10)^0.11

Elevation given Velocity at Desired Elevation Formula

Desired Elevation = 10*(Velocity at the desired elevation z/Wind Speed at Height of 10 m)^1/0.11
z = 10*(Vz/V10)^1/0.11

What factors affect drag?

Drag is influenced by other factors including shape, texture, viscosity (which results in viscous drag or skin friction ), compressibility, lift (which causes induced drag ), boundary layer separation, and so on

How to Calculate Elevation given Velocity at Desired Elevation?

Elevation given Velocity at Desired Elevation calculator uses Desired Elevation = 10*(Velocity at the desired elevation z/Wind Speed at Height of 10 m)^1/0.11 to calculate the Desired Elevation, Elevation given velocity at desired elevation is defined as desired elevation at which velocity is obtained. Desired Elevation is denoted by z symbol.

How to calculate Elevation given Velocity at Desired Elevation using this online calculator? To use this online calculator for Elevation given Velocity at Desired Elevation, enter Velocity at the desired elevation z (Vz) & Wind Speed at Height of 10 m (V10) and hit the calculate button. Here is how the Elevation given Velocity at Desired Elevation calculation can be explained with given input values -> 109.5041 = 10*(26.5/22)^1/0.11.

FAQ

What is Elevation given Velocity at Desired Elevation?
Elevation given velocity at desired elevation is defined as desired elevation at which velocity is obtained and is represented as z = 10*(Vz/V10)^1/0.11 or Desired Elevation = 10*(Velocity at the desired elevation z/Wind Speed at Height of 10 m)^1/0.11. Velocity at the desired elevation z [length/time] depends on the wind speed at a height of 10m and the desired elevation & Wind Speed at Height of 10 m is the ten-meter wind speed measured ten meters above the top of the datum of consideration.
How to calculate Elevation given Velocity at Desired Elevation?
Elevation given velocity at desired elevation is defined as desired elevation at which velocity is obtained is calculated using Desired Elevation = 10*(Velocity at the desired elevation z/Wind Speed at Height of 10 m)^1/0.11. To calculate Elevation given Velocity at Desired Elevation, you need Velocity at the desired elevation z (Vz) & Wind Speed at Height of 10 m (V10). With our tool, you need to enter the respective value for Velocity at the desired elevation z & Wind Speed at Height of 10 m and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!