Engine Torque Solution

STEP 0: Pre-Calculation Summary
Formula Used
Engine Torque = (9.55*Power Required to Propel a Vehicle)/Engine Speed in Rpm
T = (9.55*Pv)/N
This formula uses 3 Variables
Variables Used
Engine Torque - (Measured in Newton Meter) - Engine Torque is defined as a rotating force produced by a engine's crankshaft due to power developed during power stroke in IC engine.
Power Required to Propel a Vehicle - (Measured in Watt) - Power Required to Propel a Vehicle is defined as the power that is needed for a vehicle to propel or move it.
Engine Speed in Rpm - Engine Speed in Rpm is the speed at which the crankshaft of the engine rotates.
STEP 1: Convert Input(s) to Base Unit
Power Required to Propel a Vehicle: 12000 Watt --> 12000 Watt No Conversion Required
Engine Speed in Rpm: 6000 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
T = (9.55*Pv)/N --> (9.55*12000)/6000
Evaluating ... ...
T = 19.1
STEP 3: Convert Result to Output's Unit
19.1 Newton Meter -->19100 Newton Millimeter (Check conversion ​here)
FINAL ANSWER
19100 Newton Millimeter <-- Engine Torque
(Calculation completed in 00.020 seconds)
You are here -

Credits

Creator Image
Created by Syed Adnan
Ramaiah University of Applied Sciences (RUAS), bangalore
Syed Adnan has created this Calculator and 200+ more calculators!
Verifier Image
Verified by Kartikay Pandit
National Institute Of Technology (NIT), Hamirpur
Kartikay Pandit has verified this Calculator and 400+ more calculators!

Driveline Calculators

Angular Acceleration of Driven Shaft
​ Go Angular Acceleration of Driven Shaft = -Angular Velocity of Driven Shaft^2*cos(Angle Between Driving And Driven Shafts)*sin(Angle Between Driving And Driven Shafts)^2*sin(2*Angle Rotated By Driven Shaft)/((1-cos(Angle Rotated By Driven Shaft)^2*sin(Angle Between Driving And Driven Shafts)^2)^2)
Velocity Ratio of Hooke's Joint
​ Go Velocity Ratio = cos(Angle Between Driving And Driven Shafts)/(1-cos(Angle Rotated By Driving Shaft)^2*sin(Angle Between Driving And Driven Shafts)^2)
Axial Force of Multiplate Clutch using Uniform Wear Theory
​ Go Total Axial Load = pi*Pressure of Intensity*Inner Diameter of Friction Disc*(Outer Diameter of Friction Disc-Inner Diameter of Friction Disc)*0.5
Gear Step
​ Go Gear Step = Preceding Lower Gear Ratio Number/Gear Ratio Number

Engine Torque Formula

Engine Torque = (9.55*Power Required to Propel a Vehicle)/Engine Speed in Rpm
T = (9.55*Pv)/N

What is engine torque or moment?

Torque is a rotating force produced by a engine's crankshaft. The more torque the motor produces, the greater is its ability to perform work. Since torque is a vector acting in a direction it is commonly quantified by the units Nm or pound-feet.

How to Calculate Engine Torque?

Engine Torque calculator uses Engine Torque = (9.55*Power Required to Propel a Vehicle)/Engine Speed in Rpm to calculate the Engine Torque, The Engine torque formula is defined as a rotating force produced by a engine's crankshaft due to power developed during power stroke in IC engine. Engine Torque is denoted by T symbol.

How to calculate Engine Torque using this online calculator? To use this online calculator for Engine Torque, enter Power Required to Propel a Vehicle (Pv) & Engine Speed in Rpm (N) and hit the calculate button. Here is how the Engine Torque calculation can be explained with given input values -> 1.9E+7 = (9.55*12000)/6000.

FAQ

What is Engine Torque?
The Engine torque formula is defined as a rotating force produced by a engine's crankshaft due to power developed during power stroke in IC engine and is represented as T = (9.55*Pv)/N or Engine Torque = (9.55*Power Required to Propel a Vehicle)/Engine Speed in Rpm. Power Required to Propel a Vehicle is defined as the power that is needed for a vehicle to propel or move it & Engine Speed in Rpm is the speed at which the crankshaft of the engine rotates.
How to calculate Engine Torque?
The Engine torque formula is defined as a rotating force produced by a engine's crankshaft due to power developed during power stroke in IC engine is calculated using Engine Torque = (9.55*Power Required to Propel a Vehicle)/Engine Speed in Rpm. To calculate Engine Torque, you need Power Required to Propel a Vehicle (Pv) & Engine Speed in Rpm (N). With our tool, you need to enter the respective value for Power Required to Propel a Vehicle & Engine Speed in Rpm and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!