Fire Demand given Value of McDonald Coefficient Calculator

✖Total Storage Capacity refers to the maximum volume or amount of water that a reservoir, basin, or any water storage system can hold under normal operating conditions.ⓘ Total Storage Capacity [T]			+10% -10%
✖Average Domestic Demand refers to the average amount of water or other resources used by households within a specific area over a certain period, usually measured in gallons per day or liters per day.ⓘ Average Domestic Demand [D]			+10% -10%
✖Capacity of Pump refers to the volume of fluid (such as water, sewage, or other liquids) that the pump is capable of moving within a given amount of time.ⓘ Capacity of Pump [P]			+10% -10%

✖Fire Demand is the amount of water required to extinguish fire.ⓘ Fire Demand given Value of McDonald Coefficient [F]

⎘ Copy

👎

Formula

✖

Fire Demand given Value of McDonald Coefficient

Formula

`"F" = ("T"-((0.2+0.1+(10/24))*"D")+((10/24)*"P"))/(10/24)`

Example

`"1099.992L/d"=("505.08L/d"-((0.2+0.1+(10/24))*"135L/d")+((10/24)*"120L/d"))/(10/24)`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Fire Demand given Value of McDonald Coefficient Solution

STEP 0: Pre-Calculation Summary

Formula Used

Fire Demand = (Total Storage Capacity-((0.2+0.1+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24)
F = (T-((0.2+0.1+(10/24))*D)+((10/24)*P))/(10/24)
This formula uses 4 Variables

Variables Used

Fire Demand - (Measured in Cubic Meter per Second) - Fire Demand is the amount of water required to extinguish fire.
Total Storage Capacity - (Measured in Cubic Meter per Second) - Total Storage Capacity refers to the maximum volume or amount of water that a reservoir, basin, or any water storage system can hold under normal operating conditions.
Average Domestic Demand - (Measured in Cubic Meter per Second) - Average Domestic Demand refers to the average amount of water or other resources used by households within a specific area over a certain period, usually measured in gallons per day or liters per day.
Capacity of Pump - (Measured in Cubic Meter per Second) - Capacity of Pump refers to the volume of fluid (such as water, sewage, or other liquids) that the pump is capable of moving within a given amount of time.

STEP 1: Convert Input(s) to Base Unit

Total Storage Capacity: 505.08 Liter per day --> 5.84583333333333E-06 Cubic Meter per Second (Check conversion here)
Average Domestic Demand: 135 Liter per day --> 1.5625E-06 Cubic Meter per Second (Check conversion here)
Capacity of Pump: 120 Liter per day --> 1.38888888888889E-06 Cubic Meter per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F = (T-((0.2+0.1+(10/24))*D)+((10/24)*P))/(10/24) --> (5.84583333333333E-06-((0.2+0.1+(10/24))*1.5625E-06)+((10/24)*1.38888888888889E-06))/(10/24)

Evaluating ... ...

F = 1.27313888888889E-05

STEP 3: Convert Result to Output's Unit

1.27313888888889E-05 Cubic Meter per Second -->1099.992 Liter per day (Check conversion here)

FINAL ANSWER

1099.992 Liter per day <-- Fire Demand

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Distribution of Water » Capacity of Distribution Reservoir » Fire Demand given Value of McDonald Coefficient

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 8 Capacity of Distribution Reservoir Calculators

Fire Demand given Total Storage Capacity

Go Fire Demand = (Total Storage Capacity-((Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24)

Average Domestic Demand given Total Storage Capacity

Go Average Domestic Demand = (Total Storage Capacity-((10/24)*(Fire Demand-Capacity of Pump)))/(Numerical Coefficient a+Numerical Coefficient b+(10/24))

Total Storage Capacity of Reservoir

Go Total Storage Capacity = (Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand+(10/24)*(Fire Demand-Capacity of Pump)

Fire Demand given Value of McDonald Coefficient

Go Fire Demand = (Total Storage Capacity-((0.2+0.1+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24)

Reserve Fire Pumping Capacity given Reserve Storage

Go Capacity of Pump = Fire Demand-(Reserve Storage/Duration of Fire)

Fire Duration given Reserve Storage

Go Duration of Fire = Reserve Storage/(Fire Demand-Capacity of Pump)

Fire Demand given Reserve Storage

Go Fire Demand = (Reserve Storage/Duration of Fire)+Capacity of Pump

Reserve Storage

Go Reserve Storage = (Fire Demand-Capacity of Pump)*Duration of Fire

Fire Demand given Value of McDonald Coefficient Formula

Fire Demand = (Total Storage Capacity-((0.2+0.1+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24)
F = (T-((0.2+0.1+(10/24))*D)+((10/24)*P))/(10/24)

What is Fire Demand?

Fire demand is the amount of water required to extinguish fire. Or. The water required for fire fighting in a given area. Although the actual amount of water used in a year is small for fire fighting.

How to Calculate Fire Demand given Value of McDonald Coefficient?

Fire Demand given Value of McDonald Coefficient calculator uses Fire Demand = (Total Storage Capacity-((0.2+0.1+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24) to calculate the Fire Demand, The Fire Demand given Value of McDonald Coefficient is defined as the amount of water required to extinguish a fire in a particular area. when we have value of McDonald coefficient. Fire Demand is denoted by F symbol.

How to calculate Fire Demand given Value of McDonald Coefficient using this online calculator? To use this online calculator for Fire Demand given Value of McDonald Coefficient, enter Total Storage Capacity (T), Average Domestic Demand (D) & Capacity of Pump (P) and hit the calculate button. Here is how the Fire Demand given Value of McDonald Coefficient calculation can be explained with given input values -> 9.5E+10 = (5.84583333333333E-06-((0.2+0.1+(10/24))*1.5625E-06)+((10/24)*1.38888888888889E-06))/(10/24).

FAQ

What is Fire Demand given Value of McDonald Coefficient?

The Fire Demand given Value of McDonald Coefficient is defined as the amount of water required to extinguish a fire in a particular area. when we have value of McDonald coefficient and is represented as F = (T-((0.2+0.1+(10/24))*D)+((10/24)*P))/(10/24) or Fire Demand = (Total Storage Capacity-((0.2+0.1+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24). Total Storage Capacity refers to the maximum volume or amount of water that a reservoir, basin, or any water storage system can hold under normal operating conditions, Average Domestic Demand refers to the average amount of water or other resources used by households within a specific area over a certain period, usually measured in gallons per day or liters per day & Capacity of Pump refers to the volume of fluid (such as water, sewage, or other liquids) that the pump is capable of moving within a given amount of time.

How to calculate Fire Demand given Value of McDonald Coefficient?

The Fire Demand given Value of McDonald Coefficient is defined as the amount of water required to extinguish a fire in a particular area. when we have value of McDonald coefficient is calculated using Fire Demand = (Total Storage Capacity-((0.2+0.1+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24). To calculate Fire Demand given Value of McDonald Coefficient, you need Total Storage Capacity (T), Average Domestic Demand (D) & Capacity of Pump (P). With our tool, you need to enter the respective value for Total Storage Capacity, Average Domestic Demand & Capacity of Pump and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Fire Demand?

In this formula, Fire Demand uses Total Storage Capacity, Average Domestic Demand & Capacity of Pump. We can use 2 other way(s) to calculate the same, which is/are as follows -

Fire Demand = (Reserve Storage/Duration of Fire)+Capacity of Pump
Fire Demand = (Total Storage Capacity-((Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24)

Home

FREE PDFs

🔍 Search