Flood Discharge for Madras Catchment Calculator

✖Constant Metric Unit is used and depend upon catchment.ⓘ Constant Metric Unit [C_m]			+10% -10%
✖Catchment Area for Flood Discharge is an area of land where all water flows to a single stream, river, lake or even ocean.ⓘ Catchment Area for Flood Discharge [A_{flood discharge}]			+10% -10%

✖Discharge is the rate of flow of a liquid.ⓘ Flood Discharge for Madras Catchment [Q]

⎘ Copy

👎

Formula

✖

Flood Discharge for Madras Catchment

Formula

`"Q" = "C"_{"m"}*("A"_{"flood discharge"})^(2/3)`

Example

`"0.793701m³/s"="0.5"*("2.0m²")^(2/3)`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Flood Discharge for Madras Catchment Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge = Constant Metric Unit*(Catchment Area for Flood Discharge)^(2/3)
Q = C_m*(A_{flood discharge})^(2/3)
This formula uses 3 Variables

Variables Used

Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Constant Metric Unit - Constant Metric Unit is used and depend upon catchment.
Catchment Area for Flood Discharge - (Measured in Square Meter) - Catchment Area for Flood Discharge is an area of land where all water flows to a single stream, river, lake or even ocean.

STEP 1: Convert Input(s) to Base Unit

Constant Metric Unit: 0.5 --> No Conversion Required
Catchment Area for Flood Discharge: 2 Square Meter --> 2 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = C_m*(A_{flood discharge})^(2/3) --> 0.5*(2)^(2/3)

Evaluating ... ...

Q = 0.7937005259841

STEP 3: Convert Result to Output's Unit

0.7937005259841 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

0.7937005259841 ≈ 0.793701 Cubic Meter per Second <-- Discharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Surface Water Hydrology-II » Flood Discharge Formulae » Ryve's Formula » Flood Discharge for Madras Catchment

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 14 Ryve's Formula Calculators

Constant used in Metric Unit given Flood Discharge for Madras Catchment

Go Constant Metric Unit = (Discharge/(Catchment Area for Flood Discharge)^(2/3))

Flood Discharge for Madras Catchment

Go Discharge = Constant Metric Unit*(Catchment Area for Flood Discharge)^(2/3)

Catchment Area for Flood Discharge of Madras Catchment

Go Catchment Area for Flood Discharge = (Discharge/Constant FPS)^(3/2)

Constant used in FPS Unit for Flood Discharge for Madras Catchment

Go Constant FPS = (Discharge in cusecs/(Area of Basin)^(2/3))

Flood Discharge for Madras Catchment in FPS Unit

Go Discharge in cusecs = Constant FPS*(Area of Basin)^(2/3)

Catchment Area given Flood Discharge for Area within 24 KM to 161 KM from Coast

Go Catchment Area for Flood Discharge = (Discharge/8.75)^(3/2)

Catchment Area given Flood Discharge for Area within 24 KM from Coast

Go Catchment Area for Flood Discharge = (Discharge/6.75)^(3/2)

Catchment Area given Flood Discharge for limited Area near Hills

Go Catchment Area for Flood Discharge = (Discharge/10.1)^(3/2)

Flood Discharge for Area within 24 KM to 161 KM from Coast

Go Discharge = 8.75*(Catchment Area for Flood Discharge)^(2/3)

Flood Discharge for Area within 24 KM from Coast

Go Discharge = 6.75*(Catchment Area for Flood Discharge)^(2/3)

Flood Discharge for Limited Area near Hills

Go Discharge = 10.1*(Catchment Area for Flood Discharge)^(2/3)

Flood Discharge in FPS Unit for Area within 24 KM to 161 KM from Coast

Go Discharge in cusecs = 563*(Area of Basin)^(2/3)

Flood Discharge in FPS Unit for Area within 24 KM from Coast

Go Discharge in cusecs = 450*(Area of Basin)^(2/3)

Flood Discharge in FPS Unit for Limited Area near Hills

Go Discharge in cusecs = 672*(Area of Basin)^(2/3)

Flood Discharge for Madras Catchment Formula

Discharge = Constant Metric Unit*(Catchment Area for Flood Discharge)^(2/3)
Q = C_m*(A_{flood discharge})^(2/3)

What is flood ?

A flood is an overflow of water on normally dry ground. This is most commonly due to an overflowing river, a dam break, snowmelt, or heavy rainfall.

How to Calculate Flood Discharge for Madras Catchment?

Flood Discharge for Madras Catchment calculator uses Discharge = Constant Metric Unit*(Catchment Area for Flood Discharge)^(2/3) to calculate the Discharge, The Flood Discharge for Madras Catchment calculates the value of flood discharge when we have prior information of other parameters used. Discharge is denoted by Q symbol.

How to calculate Flood Discharge for Madras Catchment using this online calculator? To use this online calculator for Flood Discharge for Madras Catchment, enter Constant Metric Unit (C_m) & Catchment Area for Flood Discharge (A_{flood discharge}) and hit the calculate button. Here is how the Flood Discharge for Madras Catchment calculation can be explained with given input values -> 0.793701 = 0.5*(2)^(2/3).

FAQ

What is Flood Discharge for Madras Catchment?

The Flood Discharge for Madras Catchment calculates the value of flood discharge when we have prior information of other parameters used and is represented as Q = C_m*(A_{flood discharge})^(2/3) or Discharge = Constant Metric Unit*(Catchment Area for Flood Discharge)^(2/3). Constant Metric Unit is used and depend upon catchment & Catchment Area for Flood Discharge is an area of land where all water flows to a single stream, river, lake or even ocean.

How to calculate Flood Discharge for Madras Catchment?

The Flood Discharge for Madras Catchment calculates the value of flood discharge when we have prior information of other parameters used is calculated using Discharge = Constant Metric Unit*(Catchment Area for Flood Discharge)^(2/3). To calculate Flood Discharge for Madras Catchment, you need Constant Metric Unit (C_m) & Catchment Area for Flood Discharge (A_{flood discharge}). With our tool, you need to enter the respective value for Constant Metric Unit & Catchment Area for Flood Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge?

In this formula, Discharge uses Constant Metric Unit & Catchment Area for Flood Discharge. We can use 3 other way(s) to calculate the same, which is/are as follows -

Discharge = 6.75*(Catchment Area for Flood Discharge)^(2/3)
Discharge = 8.75*(Catchment Area for Flood Discharge)^(2/3)
Discharge = 10.1*(Catchment Area for Flood Discharge)^(2/3)

Home

FREE PDFs

🔍 Search