Frequency of Cutting using Charging and Sparking Time Calculator

✖Sparking time is defined as the time for which a spark is sustained.ⓘ Sparking Time [t_s]			+10% -10%
✖Charging time is the time required to charge a particular device.ⓘ Charging Time [t_c]			+10% -10%

✖Frequency of Cutting refers to how often a machine or tool is engaged to trim, shape, or remove material from a workpiece during the production process.ⓘ Frequency of Cutting using Charging and Sparking Time [f_cut]

⎘ Copy

👎

Formula

✖

Frequency of Cutting using Charging and Sparking Time

Formula

`"f"_{"cut"} = 1/("t"_{"s"}+"t"_{"c"})`

Example

`"0.005cycle/s"=1/("0.2s"+"199.8s")`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Frequency of Cutting using Charging and Sparking Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Frequency of Cutting = 1/(Sparking Time+Charging Time)
f_cut = 1/(t_s+t_c)
This formula uses 3 Variables

Variables Used

Frequency of Cutting - (Measured in Hertz) - Frequency of Cutting refers to how often a machine or tool is engaged to trim, shape, or remove material from a workpiece during the production process.
Sparking Time - (Measured in Second) - Sparking time is defined as the time for which a spark is sustained.
Charging Time - (Measured in Second) - Charging time is the time required to charge a particular device.

STEP 1: Convert Input(s) to Base Unit

Sparking Time: 0.2 Second --> 0.2 Second No Conversion Required
Charging Time: 199.8 Second --> 199.8 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_cut = 1/(t_s+t_c) --> 1/(0.2+199.8)

Evaluating ... ...

f_cut = 0.005

STEP 3: Convert Result to Output's Unit

0.005 Hertz -->0.005 Cycle per Second (Check conversion here)

FINAL ANSWER

0.005 Cycle per Second <-- Frequency of Cutting

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Unconventional machining processes » Electro Discharge Machining (EDM) » System Analysis in EDM » Relaxation Circuit used for Generating Pulses in EDM » Frequency of Cutting » Frequency of Cutting using Charging and Sparking Time

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has verified this Calculator and 200+ more calculators!

< 6 Frequency of Cutting Calculators

Frequency of Cutting from Capacitance and Inductance

Go Frequency of Cutting = 0.03/sqrt(Inductance*Capacitance)

Inductance of Circuit from Cutting Frequency

Go Inductance = ((0.03/Frequency of Cutting)^2)/Capacitance

Capacitance of Circuit

Go Capacitance = ((0.03/Frequency of Cutting)^2)/Inductance

Frequency of Cutting using Charging and Sparking Time

Go Frequency of Cutting = 1/(Sparking Time+Charging Time)

Sparking Time from Frequency of Cutting

Go Sparking Time = 1/Frequency of Cutting-Charging Time

Charging Time from Cutting Frequency

Go Charging Time = 1/Frequency of Cutting-Sparking Time

Frequency of Cutting using Charging and Sparking Time Formula

Frequency of Cutting = 1/(Sparking Time+Charging Time)
f_cut = 1/(t_s+t_c)

How the spark is produced in Electric Discharge Machining ?

A typical circuit used for supplying the power to an EDM machine is named as the relaxation circuit. The circuit consists of a DC power source, which charges the capacitor ‘C’ across a resistance ‘Rc’. Initially when the capacitor is in the uncharged condition, when the power supply is on with a voltage of Vo, a heavy current, ic, will flow in the circuit as shown to charge the capacitor.The relaxation circuit as explained above was used in the early EDM machines. They are limited to the low material removal rates for fine finish, which limits its application. This can be explained from the fact that the time spent on charging the capacitor is quite large during which time, no machining can actually take place. Thus the material removal rates are low.

How to Calculate Frequency of Cutting using Charging and Sparking Time?

Frequency of Cutting using Charging and Sparking Time calculator uses Frequency of Cutting = 1/(Sparking Time+Charging Time) to calculate the Frequency of Cutting, The Frequency of cutting using charging and sparking time formula is defined as the inverse of sum of charging time and sparking time. Frequency of Cutting is denoted by f_cut symbol.

How to calculate Frequency of Cutting using Charging and Sparking Time using this online calculator? To use this online calculator for Frequency of Cutting using Charging and Sparking Time, enter Sparking Time (t_s) & Charging Time (t_c) and hit the calculate button. Here is how the Frequency of Cutting using Charging and Sparking Time calculation can be explained with given input values -> 3.333333 = 1/(0.2+199.8).

FAQ

What is Frequency of Cutting using Charging and Sparking Time?

The Frequency of cutting using charging and sparking time formula is defined as the inverse of sum of charging time and sparking time and is represented as f_cut = 1/(t_s+t_c) or Frequency of Cutting = 1/(Sparking Time+Charging Time). Sparking time is defined as the time for which a spark is sustained & Charging time is the time required to charge a particular device.

How to calculate Frequency of Cutting using Charging and Sparking Time?

The Frequency of cutting using charging and sparking time formula is defined as the inverse of sum of charging time and sparking time is calculated using Frequency of Cutting = 1/(Sparking Time+Charging Time). To calculate Frequency of Cutting using Charging and Sparking Time, you need Sparking Time (t_s) & Charging Time (t_c). With our tool, you need to enter the respective value for Sparking Time & Charging Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Frequency of Cutting?

In this formula, Frequency of Cutting uses Sparking Time & Charging Time. We can use 1 other way(s) to calculate the same, which is/are as follows -

Frequency of Cutting = 0.03/sqrt(Inductance*Capacitance)

Home

FREE PDFs

🔍 Search