Gibbs Free Energy Given Surface Area Calculator

↳

⤿

Capillarity and Surface Forces in Liquids (Curved Surfaces)

BET Adsorption Isotherm

Colloidal Structures in Surfactant Solutions

Freundlich adsorption isotherm

Important Formulas of Adsorption Isotherm

Important Formulas of Colloids

Important Formulas on Surface Tension

Langmuir Adsorption Isotherm

⤿

Surface Tension

Laplace and Surface Pressure

Parachor

Surface Pressure

Wilhelmy-Plate Method

✖Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.ⓘ Surface Tension of Fluid [γ]			+10% -10%
✖The Area of Surface is the surface of the object where the drag force takes place due to the boundary layer.ⓘ Area of Surface [A]			+10% -10%

✖Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure.ⓘ Gibbs Free Energy Given Surface Area [G]

⎘ Copy

👎

Formula

✖

Gibbs Free Energy Given Surface Area

Formula

`"G" = "γ"*"A"`

Example

`"0.73J"="73mN/m"*"10m²"`

Calculator

LaTeX

Reset

👍

Download Capillarity and Surface Forces in Liquids (Curved Surfaces) Formula PDF

Gibbs Free Energy Given Surface Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Gibbs Free Energy = Surface Tension of Fluid*Area of Surface
G = γ*A
This formula uses 3 Variables

Variables Used

Gibbs Free Energy - (Measured in Joule) - Gibbs Free Energy is a thermodynamic potential that can be used to calculate the maximum of reversible work that may be performed by a thermodynamic system at a constant temperature and pressure.
Surface Tension of Fluid - (Measured in Newton per Meter) - Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.
Area of Surface - (Measured in Square Meter) - The Area of Surface is the surface of the object where the drag force takes place due to the boundary layer.

STEP 1: Convert Input(s) to Base Unit

Surface Tension of Fluid: 73 Millinewton per Meter --> 0.073 Newton per Meter (Check conversion here)
Area of Surface: 10 Square Meter --> 10 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

G = γ*A --> 0.073*10

Evaluating ... ...

G = 0.73

STEP 3: Convert Result to Output's Unit

0.73 Joule --> No Conversion Required

FINAL ANSWER

0.73 Joule <-- Gibbs Free Energy

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Capillarity and Surface Forces in Liquids (Curved Surfaces) » Surface Tension » Gibbs Free Energy Given Surface Area

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 20 Surface Tension Calculators

Surface Tension given Contact Angle

Go Surface Tension of Fluid = (2*Radius of Curvature*Density of Fluid*[g]*Height of Capillary Rise/Fall)*(1/cos(Contact Angle))

Surface Tension of Sea Water

Go Surface Tension of Sea Water = Surface Tension of Pure Water*(1+(3.766*10^(-4)*Reference Salinity)+(2.347*10^(-6)*Reference Salinity*Temperature in Degree Celsius))

Surface Tension Given Maximum Volume

Go Surface Tension = (Volume*Change in Density*[g]*Correction Factor)/(2*pi*Capillary Radius)

Surface Tension given Molecular Weight

Go Surface Tension of Fluid = [EOTVOS_C]*(Critical Temperature-Temperature-6)/(Molecular Weight/Density of Liquid)^(2/3)

Surface Tension of Pure Water

Go Surface Tension of Pure Water = 235.8*(1-(Temperature/Critical Temperature))^(1.256)*(1-(0.625*(1-(Temperature/Critical Temperature))))

Surface Tension given Critical Temperature

Go Surface Tension of Fluid given Critical Temp = Constant for each Liquid*(1-(Temperature/Critical Temperature))^(Empirical Factor)

Surface Tension given Correction Factor

Go Surface Tension of Fluid = (Drop Weight*[g])/(2*pi*Capillary Radius*Correction Factor)

Surface Tension given Molar Volume

Go Surface Tension of Fluid given Molar Volume = [EOTVOS_C]*(Critical Temperature-Temperature)/(Molar Volume)^(2/3)

Height of Magnitude of Capillary Rise

Go Height of Capillary Rise/Fall = Surface Tension of Fluid/((1/2)*(Radius of Tubing*Density of Fluid*[g]))

Surface Tension Force given Density of Fluid

Go Surface Tension of Fluid = (1/2)*(Radius of Tubing*Density of Fluid*[g]*Height of Capillary Rise/Fall)

Surface Tension Given Density of Vapor

Go Surface Tension of Fluid = Characteristic Constant*(Density of Liquid-Density of Vapor)^4

Surface Tension given Temperature

Go Surface Tension of Fluid given Temperature = 75.69-(0.1413*Temperature)-(0.0002985*(Temperature)^2)

Surface Tension Given Force

Go Surface Tension of Fluid = Force/(4*pi*Radius of Ring)

Work of Cohesion given Surface Tension

Go Work of Cohesion = 2*Surface Tension of Fluid*[Avaga-no]^(1/3)*(Molar Volume)^(2/3)

Solubility Parameter Given Surface Tension

Go Solubility Parameter = 4.1*(Surface Tension of Fluid/(Molar Volume)^(1/3))^(0.43)

Surface Tension for very Thin Plate using Wilhelmy-Plate Method

Go Surface Tension of Fluid = Force on very Thin Plate/(2*Weight of Plate)

Surface Tension Given Gibbs Free Energy

Go Surface Tension of Fluid = Gibbs Free Energy/Area of Surface

Gibbs Free Energy Given Surface Area

Go Gibbs Free Energy = Surface Tension of Fluid*Area of Surface

Surface Tension of Methane+Hexane System

Go Surface Tension of Methane+Hexane System = 0.64+(17.85*Concentration of Hexane)

Surface Tension of Liquid Methane

Go Surface Tension of Liquid Methane = 40.52*(1-(Temperature/190.55))^1.287

Gibbs Free Energy Given Surface Area Formula

Gibbs Free Energy = Surface Tension of Fluid*Area of Surface
G = γ*A

What do you understand by surface tension of liquid?

In the case of the liquid/gas interface, the resultant force acting on the surface molecules from the liquid side exceeds that from the gas side. Surface molecules of the liquid are therefore drawn into the liquid phase, whose surface area tends to diminish. As a consequence of interactions among liquid molecules, the force-directed normal to the surface into the liquid is accompanied by another force-directed tangentially to the surface and preventing its area from increasing. This latter force per unit length (the cross-section of the surface is a line) is a measure of the surface tension (denoted by γ or σ).

How to Calculate Gibbs Free Energy Given Surface Area?

Gibbs Free Energy Given Surface Area calculator uses Gibbs Free Energy = Surface Tension of Fluid*Area of Surface to calculate the Gibbs Free Energy, The Gibbs Free Energy Given Surface Area formula is defined as the Gibbs free energy of a curved surface that is directly proportional to the surface area. Gibbs Free Energy is denoted by G symbol.

How to calculate Gibbs Free Energy Given Surface Area using this online calculator? To use this online calculator for Gibbs Free Energy Given Surface Area, enter Surface Tension of Fluid (γ) & Area of Surface (A) and hit the calculate button. Here is how the Gibbs Free Energy Given Surface Area calculation can be explained with given input values -> 0.73 = 0.073*10.

FAQ

What is Gibbs Free Energy Given Surface Area?

The Gibbs Free Energy Given Surface Area formula is defined as the Gibbs free energy of a curved surface that is directly proportional to the surface area and is represented as G = γ*A or Gibbs Free Energy = Surface Tension of Fluid*Area of Surface. Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces & The Area of Surface is the surface of the object where the drag force takes place due to the boundary layer.

How to calculate Gibbs Free Energy Given Surface Area?

The Gibbs Free Energy Given Surface Area formula is defined as the Gibbs free energy of a curved surface that is directly proportional to the surface area is calculated using Gibbs Free Energy = Surface Tension of Fluid*Area of Surface. To calculate Gibbs Free Energy Given Surface Area, you need Surface Tension of Fluid (γ) & Area of Surface (A). With our tool, you need to enter the respective value for Surface Tension of Fluid & Area of Surface and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search