Haul Distance in Feet given Variable Time Calculator

✖Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.ⓘ Variable Time in Scraper Production [T_v]			+10% -10%
✖Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time .ⓘ Speed in Miles per Hour in Scraper Production [S_mph]			+10% -10%
✖Return Distance in Foot in Scraper Production is the journey back from a destination.ⓘ Return Distance in Foot in Scraper Production [R_ft]			+10% -10%

✖Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation.ⓘ Haul Distance in Feet given Variable Time [H_ft]

⎘ Copy

👎

Formula

✖

Haul Distance in Feet given Variable Time

Formula

`"H"_{"ft"} = ("T"_{"v"}*88*"S"_{"mph"})-"R"_{"ft"}`

Example

`"66.396ft"=("0.2min"*88*"0.045mi/h")-"3.3ft"`

Calculator

LaTeX

Reset

👍

Download Scraper Production Formulas PDF

Haul Distance in Feet given Variable Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production
H_ft = (T_v*88*S_mph)-R_ft
This formula uses 4 Variables

Variables Used

Haul Distance in Feet - (Measured in Meter) - Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation.
Variable Time in Scraper Production - (Measured in Second) - Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.
Speed in Miles per Hour in Scraper Production - (Measured in Meter per Second) - Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time .
Return Distance in Foot in Scraper Production - (Measured in Meter) - Return Distance in Foot in Scraper Production is the journey back from a destination.

STEP 1: Convert Input(s) to Base Unit

Variable Time in Scraper Production: 0.2 Minute --> 12 Second (Check conversion here)
Speed in Miles per Hour in Scraper Production: 0.045 Mile per Hour --> 0.0201168 Meter per Second (Check conversion here)
Return Distance in Foot in Scraper Production: 3.3 Foot --> 1.00584000000402 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H_ft = (T_v*88*S_mph)-R_ft --> (12*88*0.0201168)-1.00584000000402

Evaluating ... ...

H_ft = 20.237500799996

STEP 3: Convert Result to Output's Unit

20.237500799996 Meter -->66.3959999997212 Foot (Check conversion here)

FINAL ANSWER

66.3959999997212 ≈ 66.396 Foot <-- Haul Distance in Feet

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Haul Distance in Feet given Variable Time

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 25 Scraper Production Calculators

Speed at Haul and Return in Miles per Hour given Variable Time

Go Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production)

Variable Time when Haul and Return Distance is in Feet

Go Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production)

Return Distance in Feet given Variable Time

Go Return Distance in Foot in Scraper Production = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Haul Distance in Feet

Haul Distance in Feet given Variable Time

Go Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production

Speed at Haul and Return in Kilometer per Hour given Variable Time

Go Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production)

Return Distance in Meter given Variable Time

Go Return Distance in Meter = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Haul Distance

Haul Distance in Meter given Variable Time

Go Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter

Production Required to Determine Number of Scrapers

Go Production Required in Scraper Production = (Bank in Scraper Production/Time in Scraper Production in Hour)

Working Time given Production Required

Go Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production)

Quantity given Production Required

Go Bank in Scraper Production = (Production Required in Scraper Production*Time in Scraper Production in Hour)

Production Required given Number of Scrapers Needed for Job

Go Production Required in Scraper Production = Number of Scraper in Scraper Production*Production per Unit

Trips per Hour given Production of Scrap by Machines

Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Number of Scrapers Needed for Job

Go Number of Scraper = (Production Required in Scraper Production/Production per Unit)

Density of Material given Quantity of Scrap Produced

Go Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper)

Weight of Load Given Quantity of Scrap Produced

Go Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production)

Bank or Quantity of Scrap Produced

Go Bank in Scraper = (Weight of Load Scrap/Density of Material in Scraper Production)

Scraper Cycle Time given Number of Scrapers Pusher can Load

Go Scraper Cycle Time = (Number of Scraper a Pusher*Pusher Cycle Time)

Pusher Cycle Time given Number of Scrapers Pusher can Load

Go Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher)

Number of Scrapers Pusher can Load

Go Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time)

Working Time given Trips per Hour for Excavating Scrap

Go Working Time in Scraper Production = (Trips per Hour*Cycle Time)

Cycle Time given Trips per Hour for Excavating Scrap

Go Cycle Time = (Working Time in Scraper Production/Trips per Hour)

Trips per Hour for Excavating Scrap

Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Production per Unit Given Number of Scrapers Needed for Job

Go Production per Unit = (Production Required/Number of Scraper)

Haul Distance in Feet given Variable Time Formula

Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production
H_ft = (T_v*88*S_mph)-R_ft

What is Haul Distance?

The distance measured along the center line or most direct practical route between the center of the mass of excavation and the center of mass of the fill as finally placed. It is the distance material is moved.

How to Calculate Haul Distance in Feet given Variable Time?

Haul Distance in Feet given Variable Time calculator uses Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production to calculate the Haul Distance in Feet, The Haul Distance in Feet given Variable Time is defined as the haul distance when return distance, speed, and time are given . Haul Distance in Feet is denoted by H_ft symbol.

How to calculate Haul Distance in Feet given Variable Time using this online calculator? To use this online calculator for Haul Distance in Feet given Variable Time, enter Variable Time in Scraper Production (T_v), Speed in Miles per Hour in Scraper Production (S_mph) & Return Distance in Foot in Scraper Production (R_ft) and hit the calculate button. Here is how the Haul Distance in Feet given Variable Time calculation can be explained with given input values -> 6137.625 = (12*88*0.0201168)-1.00584000000402.

FAQ

What is Haul Distance in Feet given Variable Time?

The Haul Distance in Feet given Variable Time is defined as the haul distance when return distance, speed, and time are given and is represented as H_ft = (T_v*88*S_mph)-R_ft or Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production. Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior, Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time & Return Distance in Foot in Scraper Production is the journey back from a destination.

How to calculate Haul Distance in Feet given Variable Time?

The Haul Distance in Feet given Variable Time is defined as the haul distance when return distance, speed, and time are given is calculated using Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production. To calculate Haul Distance in Feet given Variable Time, you need Variable Time in Scraper Production (T_v), Speed in Miles per Hour in Scraper Production (S_mph) & Return Distance in Foot in Scraper Production (R_ft). With our tool, you need to enter the respective value for Variable Time in Scraper Production, Speed in Miles per Hour in Scraper Production & Return Distance in Foot in Scraper Production and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search