Hole Current Density Calculator

↳

Electronics

Chemical Engineering

Civil

Electrical

Electronics and Instrumentation

Materials Science

Mechanical

Production Engineering

⤿

Electrons & Holes

Energy Band & Charge Carrier

Semiconductor Carriers

SSD Junction

✖Total Carrier Current Density is defined as the amount of charge per unit time that flows through a unit area of a chosen cross-section.ⓘ Total Carrier Current Density [J_T]			+10% -10%
✖Electron Current Density referred to as current density, is a physical quantity that describes the flow of electric charge per unit area through a conducting material.ⓘ Electron Current Density [J_e]			+10% -10%

✖Hole Current Density is defined as Movement of holes is always in opposite to that of corresponding electrons.ⓘ Hole Current Density [J_h]

⎘ Copy

👎

Formula

✖

Hole Current Density

Formula

`"J"_{"h"} = "J"_{"T"}-"J"_{"e"}`

Example

`"0.09A/m²"="0.12A/m²"-"0.03A/m²"`

Calculator

LaTeX

Reset

👍

Download Electrons & Holes Formulas PDF PDF Image

Hole Current Density Solution

STEP 0: Pre-Calculation Summary

Formula Used

Hole Current Density = Total Carrier Current Density-Electron Current Density
J_h = J_T-J_e
This formula uses 3 Variables

Variables Used

Hole Current Density - (Measured in Ampere per Square Meter) - Hole Current Density is defined as Movement of holes is always in opposite to that of corresponding electrons.
Total Carrier Current Density - (Measured in Ampere per Square Meter) - Total Carrier Current Density is defined as the amount of charge per unit time that flows through a unit area of a chosen cross-section.
Electron Current Density - (Measured in Ampere per Square Meter) - Electron Current Density referred to as current density, is a physical quantity that describes the flow of electric charge per unit area through a conducting material.

STEP 1: Convert Input(s) to Base Unit

Total Carrier Current Density: 0.12 Ampere per Square Meter --> 0.12 Ampere per Square Meter No Conversion Required
Electron Current Density: 0.03 Ampere per Square Meter --> 0.03 Ampere per Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

J_h = J_T-J_e --> 0.12-0.03

Evaluating ... ...

J_h = 0.09

STEP 3: Convert Result to Output's Unit

0.09 Ampere per Square Meter --> No Conversion Required

FINAL ANSWER

0.09 Ampere per Square Meter <-- Hole Current Density

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Electronics » Solid State Devices » Electrons & Holes » Hole Current Density

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< 18 Electrons & Holes Calculators

Phi-dependent Wave Function

Go Φ Dependent Wave Function = (1/sqrt(2*pi))*(exp(Wave Quantum Number*Wave Function Angle))

Order of Diffraction

Go Order of Diffraction = (2*Grafting Space*sin(Incident Angle))/Wavelength of Ray

Radius of Nth Orbit of Electron

Go Radius of nth Orbit of Electron = ([Coulomb]*Quantum Number^2*[hP]^2)/(Mass of Particle*[Charge-e]^2)

AC Conductance

Go AC Conductance = ([Charge-e]/([BoltZ]*Temperature))*Electric Current

Quantum State

Go Energy in Quantum State = (Quantum Number^2*pi^2*[hP]^2)/(2*Mass of Particle*Potential Well Length^2)

Hole Component

Go Hole Component = Electron Component*Emitter Injection Efficiency/(1-Emitter Injection Efficiency)

Electron Flux Density

Go Electron Flux Density = (Mean Free Path Electron/(2*Time))*Difference in Electron Concentration

Mean Free Path

Go Mean Free Path Electron = (Electron Flux Density/(Difference in Electron Concentration))*2*Time

Electron Component

Go Electron Component = ((Hole Component)/Emitter Injection Efficiency)-Hole Component

Difference in Electron Concentration

Go Difference in Electron Concentration = Electron Concentration 1-Electron Concentration 2

Electron Multiplication

Go Electron Multiplication = Number of Electron Out of Region/Number of Electron in Region

Electron Out of Region

Go Number of Electron Out of Region = Electron Multiplication*Number of Electron in Region

Electron in Region

Go Number of Electron in Region = Number of Electron Out of Region/Electron Multiplication

Total Carrier Current Density

Go Total Carrier Current Density = Electron Current Density+Hole Current Density

Electron Current Density

Go Electron Current Density = Total Carrier Current Density-Hole Current Density

Hole Current Density

Go Hole Current Density = Total Carrier Current Density-Electron Current Density

Mean Time Spend by Hole

Go Mean Time Spend by Hole = Optical Generation Rate*Majority Carrier Decay

Wave Function Amplitude

Go Amplitude of Wave Function = sqrt(2/Potential Well Length)

< 15 Semiconductor Carriers Calculators

Intrinsic Carrier Concentration

Go Intrinsic Carrier Concentration = sqrt(Effective Density of State in Valence Band*Effective Density of State in Conduction Band)*exp(-Energy Gap/(2*[BoltZ]*Temperature))

Carrier Lifetime

Go Carrier Lifetime = 1/(Proportionality for Recombination*(Holes Concentration in Valance Band+Electron Concentration in Conduction Band))

Radius of Nth Orbit of Electron

Go Radius of nth Orbit of Electron = ([Coulomb]*Quantum Number^2*[hP]^2)/(Mass of Particle*[Charge-e]^2)

Quantum State

Go Energy in Quantum State = (Quantum Number^2*pi^2*[hP]^2)/(2*Mass of Particle*Potential Well Length^2)

Electron Flux Density

Go Electron Flux Density = (Mean Free Path Electron/(2*Time))*Difference in Electron Concentration

Fermi Function

Go Fermi Function = Electron Concentration in Conduction Band/Effective Density of State in Conduction Band

Effective Density State in Valence Band

Go Effective Density of State in Valence Band = Holes Concentration in Valance Band/(1-Fermi Function)

Distribution Coefficient

Go Distribution Coefficient = Impurity Concentration in Solid/Impurity Concentration in Liquid

Electron Multiplication

Go Electron Multiplication = Number of Electron Out of Region/Number of Electron in Region

Excess Carrier Concentration

Go Excess Carrier Concentration = Optical Generation Rate*Recombination Lifetime

Electron Current Density

Go Electron Current Density = Total Carrier Current Density-Hole Current Density

Hole Current Density

Go Hole Current Density = Total Carrier Current Density-Electron Current Density

Mean Time Spend by Hole

Go Mean Time Spend by Hole = Optical Generation Rate*Majority Carrier Decay

Photoelectron Energy

Go Photoelectron Energy = [hP]*Frequency of Incident Light

Conduction Band Energy

Go Conduction Band Energy = Energy Gap+Valence Band Energy

Hole Current Density Formula

Hole Current Density = Total Carrier Current Density-Electron Current Density
J_h = J_T-J_e

What is Drift Current?

Drift current is the electric current caused by particles getting pulled by an electric field. The term is most commonly used in the context of electrons and holes in semiconductors, although the same concept also applies to metals, electrolytes, and so on.

How to Calculate Hole Current Density?

Hole Current Density calculator uses Hole Current Density = Total Carrier Current Density-Electron Current Density to calculate the Hole Current Density, The Hole Current Density formula is defined as Movement of holes is always in opposite to that of corresponding electrons. Holes contribute current to their direction of movement whereas electrons contribute current opposite to their direction of movement. Hence both currents will be in same direction. Hole Current Density is denoted by J_h symbol.

How to calculate Hole Current Density using this online calculator? To use this online calculator for Hole Current Density, enter Total Carrier Current Density (J_T) & Electron Current Density (J_e) and hit the calculate button. Here is how the Hole Current Density calculation can be explained with given input values -> 0.09 = 0.12-0.03.

FAQ

What is Hole Current Density?

The Hole Current Density formula is defined as Movement of holes is always in opposite to that of corresponding electrons. Holes contribute current to their direction of movement whereas electrons contribute current opposite to their direction of movement. Hence both currents will be in same direction and is represented as J_h = J_T-J_e or Hole Current Density = Total Carrier Current Density-Electron Current Density. Total Carrier Current Density is defined as the amount of charge per unit time that flows through a unit area of a chosen cross-section & Electron Current Density referred to as current density, is a physical quantity that describes the flow of electric charge per unit area through a conducting material.

How to calculate Hole Current Density?

The Hole Current Density formula is defined as Movement of holes is always in opposite to that of corresponding electrons. Holes contribute current to their direction of movement whereas electrons contribute current opposite to their direction of movement. Hence both currents will be in same direction is calculated using Hole Current Density = Total Carrier Current Density-Electron Current Density. To calculate Hole Current Density, you need Total Carrier Current Density (J_T) & Electron Current Density (J_e). With our tool, you need to enter the respective value for Total Carrier Current Density & Electron Current Density and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search