Inlet Capacity for Flow Depth more than 1ft 5in Calculator

✖Area of Opening refers to the physical space in a structure or barrier through which air, water, or other substances can pass.ⓘ Area of Opening [A_o]			+10% -10%
✖Acceleration Due To Gravity in Environment is the acceleration gained by an object due to gravitational force.ⓘ Acceleration Due To Gravity in Environment [g]			+10% -10%
✖Depth refers to the vertical distance from a reference point to the bottom of a body of water or to a specific depth below the water surface.ⓘ Depth [D]			+10% -10%

✖Inlet Capacity refers to the maximum rate at which a storm water inlet or drainage structure can accept and convey water without causing flooding or other adverse impacts.ⓘ Inlet Capacity for Flow Depth more than 1ft 5in [Q_i]

⎘ Copy

👎

Formula

✖

Inlet Capacity for Flow Depth more than 1ft 5in

Formula

`"Q"_{"i"} = 0.6*"A"_{"o"}*((2*"g"*"D")^(1/2))`

Example

`"41.99674m³/s"=0.6*"9.128m²"*((2*"9.8m/s²"*"3m")^(1/2))`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Inlet Capacity for Flow Depth more than 1ft 5in Solution

STEP 0: Pre-Calculation Summary

Formula Used

Inlet Capacity = 0.6*Area of Opening*((2*Acceleration Due To Gravity in Environment*Depth)^(1/2))
Q_i = 0.6*A_o*((2*g*D)^(1/2))
This formula uses 4 Variables

Variables Used

Inlet Capacity - (Measured in Cubic Meter per Second) - Inlet Capacity refers to the maximum rate at which a storm water inlet or drainage structure can accept and convey water without causing flooding or other adverse impacts.
Area of Opening - (Measured in Square Meter) - Area of Opening refers to the physical space in a structure or barrier through which air, water, or other substances can pass.
Acceleration Due To Gravity in Environment - (Measured in Meter per Square Second) - Acceleration Due To Gravity in Environment is the acceleration gained by an object due to gravitational force.
Depth - (Measured in Meter) - Depth refers to the vertical distance from a reference point to the bottom of a body of water or to a specific depth below the water surface.

STEP 1: Convert Input(s) to Base Unit

Area of Opening: 9.128 Square Meter --> 9.128 Square Meter No Conversion Required
Acceleration Due To Gravity in Environment: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
Depth: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_i = 0.6*A_o*((2*g*D)^(1/2)) --> 0.6*9.128*((2*9.8*3)^(1/2))

Evaluating ... ...

Q_i = 41.9967366412201

STEP 3: Convert Result to Output's Unit

41.9967366412201 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

41.9967366412201 ≈ 41.99674 Cubic Meter per Second <-- Inlet Capacity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Flow Velocity in Straight Sewers » Disposing of Storm Water » Inlet Capacity for Flow Depth more than 1ft 5in

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< 10+ Disposing of Storm Water Calculators

Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in

Go Depth = ((Inlet Capacity/(0.6*Area of Opening))^2)*(1/(2*Acceleration Due To Gravity in Environment))

Depression in Curb Inlet given Runoff Quantity with Full Gutter flow

Go Depression in Curb Inlet = ((Runoff Quantity/(0.7*Length of Opening))^(2/3))-Depth of Flow at Inlet

Depth of Flow at Inlet given Runoff Quantity with Full Gutter Flow

Go Depth of Flow at Inlet = ((Runoff Quantity/(0.7*Length of Opening))^(2/3))-Depression in Curb Inlet

Area of Opening given Inlet Capacity for Flow Depth more than 1ft 5in

Go Area of Opening = Inlet Capacity/(0.6*(2*Acceleration Due To Gravity in Environment*Depth)^(1/2))

Length of Opening given Runoff Quantity with Full Gutter Flow

Go Length of Opening = Runoff Quantity/(0.7*(Depression in Curb Inlet+Depth of Flow at Inlet)^(3/2))

Inlet Capacity for Flow Depth more than 1ft 5in

Go Inlet Capacity = 0.6*Area of Opening*((2*Acceleration Due To Gravity in Environment*Depth)^(1/2))

Runoff Quantity with Full Gutter Flow

Go Runoff Quantity = 0.7*Length of Opening*(Depression in Curb Inlet+Depth of Flow at Inlet)^(3/2)

Depth of Flow at Inlet given Inlet Capacity for Flow Depth up to 4.8in

Go Depth of Flow at Inlet = (Water Flow/(3*Perimeter of Grate Opening))^(2/3)

Perimeter when Inlet Capacity for Flow Depth is up to 4.8 inches

Go Perimeter of Grate Opening = Water Flow/(3*Depth of Flow at Inlet^(3/2))

Inlet Capacity for Flow Depth

Go Water Flow = 3*Perimeter of Grate Opening*Depth of Flow at Inlet^(3/2)

Inlet Capacity for Flow Depth more than 1ft 5in Formula

Inlet Capacity = 0.6*Area of Opening*((2*Acceleration Due To Gravity in Environment*Depth)^(1/2))
Q_i = 0.6*A_o*((2*g*D)^(1/2))

What is Flow Depth?

Flow depth is the depth of flow in a channel or culvert when the slope of the water surface and channel bottom is the same and the water depth remains constant.

How to Calculate Inlet Capacity for Flow Depth more than 1ft 5in?

Inlet Capacity for Flow Depth more than 1ft 5in calculator uses Inlet Capacity = 0.6*Area of Opening*((2*Acceleration Due To Gravity in Environment*Depth)^(1/2)) to calculate the Inlet Capacity, The Inlet capacity for flow depth more than 1ft 5in is defined as the measures the flow in sewer pipes in terms of cubic meter of flow per day. Inlet Capacity is denoted by Q_i symbol.

How to calculate Inlet Capacity for Flow Depth more than 1ft 5in using this online calculator? To use this online calculator for Inlet Capacity for Flow Depth more than 1ft 5in, enter Area of Opening (A_o), Acceleration Due To Gravity in Environment (g) & Depth (D) and hit the calculate button. Here is how the Inlet Capacity for Flow Depth more than 1ft 5in calculation can be explained with given input values -> 41.99674 = 0.6*9.128*((2*9.8*3)^(1/2)).

FAQ

What is Inlet Capacity for Flow Depth more than 1ft 5in?

The Inlet capacity for flow depth more than 1ft 5in is defined as the measures the flow in sewer pipes in terms of cubic meter of flow per day and is represented as Q_i = 0.6*A_o*((2*g*D)^(1/2)) or Inlet Capacity = 0.6*Area of Opening*((2*Acceleration Due To Gravity in Environment*Depth)^(1/2)). Area of Opening refers to the physical space in a structure or barrier through which air, water, or other substances can pass, Acceleration Due To Gravity in Environment is the acceleration gained by an object due to gravitational force & Depth refers to the vertical distance from a reference point to the bottom of a body of water or to a specific depth below the water surface.

How to calculate Inlet Capacity for Flow Depth more than 1ft 5in?

The Inlet capacity for flow depth more than 1ft 5in is defined as the measures the flow in sewer pipes in terms of cubic meter of flow per day is calculated using Inlet Capacity = 0.6*Area of Opening*((2*Acceleration Due To Gravity in Environment*Depth)^(1/2)). To calculate Inlet Capacity for Flow Depth more than 1ft 5in, you need Area of Opening (A_o), Acceleration Due To Gravity in Environment (g) & Depth (D). With our tool, you need to enter the respective value for Area of Opening, Acceleration Due To Gravity in Environment & Depth and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search