Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero Calculator

✖Work done by/on a system is energy transferred by/to the system to/from its surroundings.ⓘ Work Done [w]			+10% -10%
✖Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.ⓘ Specific Gravity of Fluid [G]			+10% -10%
✖Weight of Fluid is the weight of fluid in Newtons or Kilo newton.ⓘ Weight of Fluid [w_f]			+10% -10%
✖The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.ⓘ Final Velocity [v_f]			+10% -10%

✖Initial Velocity is the velocity at which motion starts.ⓘ Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero [u]

⎘ Copy

👎

Formula

✖

Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero

Formula

`"u" = ("w"*"G")/("w"_{"f"}*"v"_{"f"})`

Example

`"78.8835m/s"=("3.9KJ"*"10")/("12.36N"*"40m/s")`

Calculator

LaTeX

Reset

👍

Download Torque Exerted on a Wheel with Radial Curved Vanes Formulas PDF

Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity)
u = (w*G)/(w_f*v_f)
This formula uses 5 Variables

Variables Used

Initial Velocity - (Measured in Meter per Second) - Initial Velocity is the velocity at which motion starts.
Work Done - (Measured in Joule) - Work done by/on a system is energy transferred by/to the system to/from its surroundings.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.
Weight of Fluid - (Measured in Newton) - Weight of Fluid is the weight of fluid in Newtons or Kilo newton.
Final Velocity - (Measured in Meter per Second) - The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.

STEP 1: Convert Input(s) to Base Unit

Work Done: 3.9 Kilojoule --> 3900 Joule (Check conversion here)
Specific Gravity of Fluid: 10 --> No Conversion Required
Weight of Fluid: 12.36 Newton --> 12.36 Newton No Conversion Required
Final Velocity: 40 Meter per Second --> 40 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

u = (w*G)/(w_f*v_f) --> (3900*10)/(12.36*40)

Evaluating ... ...

u = 78.8834951456311

STEP 3: Convert Result to Output's Unit

78.8834951456311 Meter per Second --> No Conversion Required

FINAL ANSWER

78.8834951456311 ≈ 78.8835 Meter per Second <-- Initial Velocity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Fundamentals of Fluid Flow » Torque Exerted on a Wheel with Radial Curved Vanes » Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 21 Torque Exerted on a Wheel with Radial Curved Vanes Calculators

Radius at Outlet for Work Done on Wheel per Second

Go Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet

Radius at Inlet for Work Done on Wheel per Second

Go Radius of wheel = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Velocity of Jet*Radius of Outlet))/Final Velocity

Angular Velocity for Work Done on Wheel per Second

Go Angular Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*(Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet))

Radius at Outlet for Torque Exerted by Fluid

Go Radius of Outlet = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)-(Final Velocity*Radius of wheel))/Velocity of Jet

Radius at Inlet with Known Torque by Fluid

Go Radius of wheel = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Radius of Outlet))/Final Velocity

Torque Exerted by Fluid

Go Torque Exerted on Wheel = (Weight of Fluid/Specific Gravity of Fluid)*(Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet)

Initial Velocity for Work Done if Jet leaves in Motion of Wheel

Go Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Final Velocity))/Final Velocity

Power Delivered to Wheel

Go Power Delivered = (Weight of Fluid/Specific Gravity of Fluid)*(Final Velocity*Initial Velocity+Velocity of Jet*Final Velocity)

Initial Velocity given Power Delivered to Wheel

Go Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity))-(Velocity of Jet))

Velocity for Work Done if there is no Loss of Energy

Go Final Velocity = sqrt(((Work Done*2*Specific Gravity of Fluid)/Weight of Fluid)+Velocity of Jet^2)

Velocity given Angular Momentum at Outlet

Go Velocity of Jet = (Tangential Momentum*Specific Gravity of Fluid)/(Weight of Fluid*Radius of wheel)

Angular Momentum at Outlet

Go Angular Momentum = ((Weight of Fluid*Velocity of Jet)/Specific Gravity of Fluid)*Radius of wheel

Velocity given Angular Momentum at Inlet

Go Final Velocity = (Angular Momentum*Specific Gravity of Fluid)/(Weight of Fluid*Radius of wheel)

Angular Momentum at Inlet

Go Angular Momentum = ((Weight of Fluid*Final Velocity)/Specific Gravity of Fluid)*Radius of wheel

Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero

Go Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity)

Speed of Wheel given Tangential Velocity at Outlet Tip of Vane

Go Angular Speed = (Tangential Velocity*60)/(2*pi*Radius of Outlet)

Speed of Wheel given Tangential Velocity at Inlet Tip of Vane

Go Angular Speed = (Tangential Velocity*60)/(2*pi*Radius of wheel)

Velocity at Point given Efficiency of System

Go Velocity of Jet = sqrt(1-Efficiency of Jet)*Final Velocity

Velocity given Efficiency of System

Go Final Velocity = Velocity of Jet/sqrt(1-Efficiency of Jet)

Efficiency of System

Go Efficiency of Jet = (1-(Velocity of Jet/Final Velocity)^2)

Mass of Fluid Striking Vane per Second

Go Fluid Mass = Weight of Fluid/Specific Gravity of Fluid

Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero Formula

Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity)
u = (w*G)/(w_f*v_f)

What is meant by Initial Velocity?

Initial velocity describes how fast an object travels when gravity first applies force on the object.

How to Calculate Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero?

Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero calculator uses Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity) to calculate the Initial Velocity, The Initial velocity when work done at vane angle is 90 and velocity is zero is the velocity which the body has in the beginning of the given time period. Initial Velocity is denoted by u symbol.

How to calculate Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero using this online calculator? To use this online calculator for Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero, enter Work Done (w), Specific Gravity of Fluid (G), Weight of Fluid (w_f) & Final Velocity (v_f) and hit the calculate button. Here is how the Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero calculation can be explained with given input values -> 78.8835 = (3900*10)/(12.36*40).

FAQ

What is Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero?

The Initial velocity when work done at vane angle is 90 and velocity is zero is the velocity which the body has in the beginning of the given time period and is represented as u = (w*G)/(w_f*v_f) or Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity). Work done by/on a system is energy transferred by/to the system to/from its surroundings, Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid, Weight of Fluid is the weight of fluid in Newtons or Kilo newton & The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.

How to calculate Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero?

The Initial velocity when work done at vane angle is 90 and velocity is zero is the velocity which the body has in the beginning of the given time period is calculated using Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity). To calculate Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero, you need Work Done (w), Specific Gravity of Fluid (G), Weight of Fluid (w_f) & Final Velocity (v_f). With our tool, you need to enter the respective value for Work Done, Specific Gravity of Fluid, Weight of Fluid & Final Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Initial Velocity?

In this formula, Initial Velocity uses Work Done, Specific Gravity of Fluid, Weight of Fluid & Final Velocity. We can use 2 other way(s) to calculate the same, which is/are as follows -

Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity))-(Velocity of Jet))
Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Final Velocity))/Final Velocity

Home

FREE PDFs

🔍 Search