Inlet Friction Coefficient given Keulegan Repletion Coefficient Solution

STEP 0: Pre-Calculation Summary
Formula Used
King’s Inlet Friction Coefficient = 1/(Keulegan Repletion Coefficient [dimensionless]*King’s 1st Inlet Friction Coefficient)^2
K1 = 1/(K*K2)^2
This formula uses 3 Variables
Variables Used
King’s Inlet Friction Coefficient - King’s Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.
Keulegan Repletion Coefficient [dimensionless] - Keulegan Repletion Coefficient [dimensionless] is mainly dependent on the King’s Inlet Friction Coefficient.
King’s 1st Inlet Friction Coefficient - King’s 1st Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.
STEP 1: Convert Input(s) to Base Unit
Keulegan Repletion Coefficient [dimensionless]: 0.75 --> No Conversion Required
King’s 1st Inlet Friction Coefficient: 0.25 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
K1 = 1/(K*K2)^2 --> 1/(0.75*0.25)^2
Evaluating ... ...
K1 = 28.4444444444444
STEP 3: Convert Result to Output's Unit
28.4444444444444 --> No Conversion Required
FINAL ANSWER
28.4444444444444 28.44444 <-- King’s Inlet Friction Coefficient
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

25 Inlet Currents and Tidal Elevations Calculators

Ocean Tide Amplitude using King's Dimensionless Velocity
Go Ocean Tide Amplitude = (Average Area over the Channel Length*Maximum Cross Sectional Average Velocity*Tidal Period)/ (King’s Dimensionless Velocity*2*pi*Surface Area of Bay)
Average Area over Channel Length using King's Dimensionless Velocity
Go Average Area over the Channel Length = (King’s Dimensionless Velocity*2*pi*Ocean Tide Amplitude*Surface Area of Bay)/(Tidal Period*Maximum Cross Sectional Average Velocity)
Maximum Cross-Sectionally Averaged Velocity during Tidal Cycle
Go Maximum Cross Sectional Average Velocity = (King’s Dimensionless Velocity*2*pi*Ocean Tide Amplitude*Surface Area of Bay)/(Average Area over the Channel Length*Tidal Period)
Surface Area of Bay using King's Dimensionless Velocity
Go Surface Area of Bay = (Average Area over the Channel Length*Tidal Period*Maximum Cross Sectional Average Velocity)/(King’s Dimensionless Velocity*2*pi*Ocean Tide Amplitude)
Tidal Period using King's Dimensionless Velocity
Go Tidal Period = (2*pi*Ocean Tide Amplitude*Surface Area of Bay*King’s Dimensionless Velocity)/(Average Area over the Channel Length*Maximum Cross Sectional Average Velocity)
King's Dimensionless Velocity
Go King’s Dimensionless Velocity = (Average Area over the Channel Length*Tidal Period*Maximum Cross Sectional Average Velocity)/(2*pi*Ocean Tide Amplitude*Surface Area of Bay)
Inlet Hydraulic Radius given Inlet Impedance
Go Hydraulic Radius = (Dimensionless Parameter*Inlet Length)/(4*(Inlet Impedance-Exit Energy Loss Coefficient-Entrance Energy Loss Coefficient))
Entrance Energy Loss Coefficient given Inlet Impedance
Go Entrance Energy Loss Coefficient = Inlet Impedance-Exit Energy Loss Coefficient-(Dimensionless Parameter*Inlet Length/(4*Hydraulic Radius))
Darcy - Weisbach Friction Term given Inlet Impedance
Go Dimensionless Parameter = (4*Hydraulic Radius*(Inlet Impedance-Entrance Energy Loss Coefficient-Exit Energy Loss Coefficient))/Inlet Length
Exit Energy Loss Coefficient given Inlet Impedance
Go Exit Energy Loss Coefficient = Inlet Impedance-Entrance Energy Loss Coefficient-(Dimensionless Parameter*Inlet Length/(4*Hydraulic Radius))
Inlet Impedance
Go Inlet Impedance = Entrance Energy Loss Coefficient+Exit Energy Loss Coefficient+(Dimensionless Parameter*Inlet Length/(4*Hydraulic Radius))
Inlet Length given Inlet Impedance
Go Inlet Length = 4*Hydraulic Radius*(Inlet Impedance-Exit Energy Loss Coefficient-Entrance Energy Loss Coefficient)/Dimensionless Parameter
Duration of Inflow given Inlet Channel Velocity
Go Duration of Inflow = (asin(Inlet Velocity/Maximum Cross Sectional Average Velocity)*Tidal Period)/(2*pi)
Maximum Cross-Sectionally Averaged Velocity during Tidal Cycle given Inlet Channel Velocity
Go Maximum Cross Sectional Average Velocity = Inlet Velocity/sin(2*pi*Duration of Inflow/Tidal Period)
Inlet Channel Velocity
Go Inlet Velocity = Maximum Cross Sectional Average Velocity*sin(2*pi*Duration of Inflow/Tidal Period)
Change of Bay Elevation with Time for Flow through Inlet into Bay
Go Change of Bay Elevation with Time = (Average Area over the Channel Length*Average Velocity in Channel for Flow)/Surface Area of Bay
Average Area over Channel Length for Flow through Inlet into Bay
Go Average Area over the Channel Length = (Surface Area of Bay*Change of Bay Elevation with Time)/Average Velocity in Channel for Flow
Average Velocity in Channel for Flow through Inlet into Bay
Go Average Velocity in Channel for Flow = (Surface Area of Bay*Change of Bay Elevation with Time)/Average Area over the Channel Length
Surface Area of Bay for Flow through Inlet into Bay
Go Surface Area of Bay = (Average Velocity in Channel for Flow*Average Area over the Channel Length)/Change of Bay Elevation with Time
Inlet Friction Coefficient Parameter given Keulegan Repletion Coefficient
Go King’s 1st Inlet Friction Coefficient = sqrt(1/King’s Inlet Friction Coefficient)/(Keulegan Repletion Coefficient [dimensionless])
Keulegan Repletion Coefficient
Go Keulegan Repletion Coefficient [dimensionless] = 1/King’s 1st Inlet Friction Coefficient*sqrt(1/King’s Inlet Friction Coefficient)
Inlet Friction Coefficient given Keulegan Repletion Coefficient
Go King’s Inlet Friction Coefficient = 1/(Keulegan Repletion Coefficient [dimensionless]*King’s 1st Inlet Friction Coefficient)^2
Hydraulic Radius given Dimensionless Parameter
Go Hydraulic Radius of the Channel = (116*Manning’s Roughness Coefficient^2/Dimensionless Parameter)^3
Surface Area of Bay given Tidal Prism Filling Bay
Go Surface Area of Bay = Tidal Prism Filling Bay/(2*Bay Tide Amplitude)
Bay Tide Amplitude given Tidal Prism Filling Bay
Go Bay Tide Amplitude = Tidal Prism Filling Bay/(2*Surface Area of Bay)

Inlet Friction Coefficient given Keulegan Repletion Coefficient Formula

King’s Inlet Friction Coefficient = 1/(Keulegan Repletion Coefficient [dimensionless]*King’s 1st Inlet Friction Coefficient)^2
K1 = 1/(K*K2)^2

What is Inlet flow patterns?

An Inlet has a "gorge" where flows converge before they expand again on the opposite side. Shoal (shallow) areas that extend bayward and oceanward from the gorge depend on inlet hydraulics, wave conditions, and general geomorphology. All these interact to determine flow patterns in and around the inlet and locations where flow channels occur.

How to Calculate Inlet Friction Coefficient given Keulegan Repletion Coefficient?

Inlet Friction Coefficient given Keulegan Repletion Coefficient calculator uses King’s Inlet Friction Coefficient = 1/(Keulegan Repletion Coefficient [dimensionless]*King’s 1st Inlet Friction Coefficient)^2 to calculate the King’s Inlet Friction Coefficient, The Inlet Friction Coefficient given Keulegan Repletion Coefficient results include the phase lag between bay and. ocean tides, and dimensionless values of maximum inlet velocity and bay. amplitude; these results are presented as functions of the so-called. "repletion coefficient," K. King’s Inlet Friction Coefficient is denoted by K1 symbol.

How to calculate Inlet Friction Coefficient given Keulegan Repletion Coefficient using this online calculator? To use this online calculator for Inlet Friction Coefficient given Keulegan Repletion Coefficient, enter Keulegan Repletion Coefficient [dimensionless] (K) & King’s 1st Inlet Friction Coefficient (K2) and hit the calculate button. Here is how the Inlet Friction Coefficient given Keulegan Repletion Coefficient calculation can be explained with given input values -> 28.44444 = 1/(0.75*0.25)^2.

FAQ

What is Inlet Friction Coefficient given Keulegan Repletion Coefficient?
The Inlet Friction Coefficient given Keulegan Repletion Coefficient results include the phase lag between bay and. ocean tides, and dimensionless values of maximum inlet velocity and bay. amplitude; these results are presented as functions of the so-called. "repletion coefficient," K and is represented as K1 = 1/(K*K2)^2 or King’s Inlet Friction Coefficient = 1/(Keulegan Repletion Coefficient [dimensionless]*King’s 1st Inlet Friction Coefficient)^2. Keulegan Repletion Coefficient [dimensionless] is mainly dependent on the King’s Inlet Friction Coefficient & King’s 1st Inlet Friction Coefficient [Dimensionless] is defined as the ratio between friction force and normal force.
How to calculate Inlet Friction Coefficient given Keulegan Repletion Coefficient?
The Inlet Friction Coefficient given Keulegan Repletion Coefficient results include the phase lag between bay and. ocean tides, and dimensionless values of maximum inlet velocity and bay. amplitude; these results are presented as functions of the so-called. "repletion coefficient," K is calculated using King’s Inlet Friction Coefficient = 1/(Keulegan Repletion Coefficient [dimensionless]*King’s 1st Inlet Friction Coefficient)^2. To calculate Inlet Friction Coefficient given Keulegan Repletion Coefficient, you need Keulegan Repletion Coefficient [dimensionless] (K) & King’s 1st Inlet Friction Coefficient (K2). With our tool, you need to enter the respective value for Keulegan Repletion Coefficient [dimensionless] & King’s 1st Inlet Friction Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!