Length of Butt Weld given Efficiency of Welded Joint Calculator

✖Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.ⓘ Tensile Force on Welded Plates [P]			+10% -10%
✖Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.ⓘ Tensile Stress in Weld [σ_t]			+10% -10%
✖Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate.ⓘ Welded Base Plate Thickness [t_p]			+10% -10%
✖The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.ⓘ Efficiency of Welded Joints [η]			+10% -10%

✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Butt Weld given Efficiency of Welded Joint [L]

⎘ Copy

👎

Formula

✖

Length of Butt Weld given Efficiency of Welded Joint

Formula

`"L" = "P"/("σ"_{"t"}*"t"_{"p"}*"η")`

Example

`"19.51135mm"="16.5kN"/("56.4N/mm²"*"18mm"*"0.833")`

Calculator

LaTeX

Reset

👍

Download Butt Welds Formulas PDF PDF Image

Length of Butt Weld given Efficiency of Welded Joint Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints)
L = P/(σ_t*t_p*η)
This formula uses 5 Variables

Variables Used

Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Tensile Force on Welded Plates - (Measured in Newton) - Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.
Tensile Stress in Weld - (Measured in Pascal) - Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.
Welded Base Plate Thickness - (Measured in Meter) - Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate.
Efficiency of Welded Joints - The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.

STEP 1: Convert Input(s) to Base Unit

Tensile Force on Welded Plates: 16.5 Kilonewton --> 16500 Newton (Check conversion here)
Tensile Stress in Weld: 56.4 Newton per Square Millimeter --> 56400000 Pascal (Check conversion here)
Welded Base Plate Thickness: 18 Millimeter --> 0.018 Meter (Check conversion here)
Efficiency of Welded Joints: 0.833 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = P/(σ_t*t_p*η) --> 16500/(56400000*0.018*0.833)

Evaluating ... ...

L = 0.0195113506395466

STEP 3: Convert Result to Output's Unit

0.0195113506395466 Meter -->19.5113506395466 Millimeter (Check conversion here)

FINAL ANSWER

19.5113506395466 ≈ 19.51135 Millimeter <-- Length of Weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Butt Welds » Length of Butt Weld given Efficiency of Welded Joint

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 16 Butt Welds Calculators

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints)

Thickness of Plate given Efficiency of Butt Welded Joint

Go Welded Base Plate Thickness = Tensile Force on Welded Plates/(Tensile Stress in Weld*Length of Weld*Efficiency of Welded Joints)

Length of Butt Weld given Efficiency of Welded Joint

Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints)

Efficiency of Butt Welded Joint

Go Efficiency of Welded Joints = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld)

Tensile Force on Plates given Efficiency of Butt Welded Joint

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints

Tensile Stress in Boiler Butt Weld given Thickness of Boiler Shell

Go Tensile Stress in Boiler Butt Weld = Internal pressure in boiler*Inner diameter of boiler/(2*Thickness of Boiler Wall)

Thickness of Welded Boiler Shell given Stress in Weld

Go Thickness of Boiler Wall = Internal pressure in boiler*Inner diameter of boiler/(2*Tensile Stress in Boiler Butt Weld)

Internal Pressure in Boiler given Thickness of Welded Boiler Shell

Go Internal pressure in boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Inner diameter of boiler

Inner Diameter of Boiler given Thickness of Welded Boiler Shell

Go Inner diameter of boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Internal pressure in boiler

Strength of Butt Welded Joint

Go Tensile Stress in Butt Weld = Tensile Force on Welded Plates/(Throat Thickness of Weld*Length of Butt Weld)

Permissible Tensile Stress in Butt Weld

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Welded Base Plate Thickness)

Length of Butt Weld given Average Tensile Stress in Weld

Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Throat Thickness of Weld)

Throat of Butt Weld given Average Tensile Stress

Go Throat Thickness of Weld = Tensile Force on Welded Plates/(Length of Weld*Tensile Stress in Weld)

Average Tensile Stress in Butt Weld

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)

Tensile Force on Plates given Average Tensile Stress in Butt Weld

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld

Tensile Force on Butt Welded Plates given Thickness of Plate

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld

Length of Butt Weld given Efficiency of Welded Joint Formula

Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints)
L = P/(σ_t*t_p*η)

What is effective length of weld?

The effective length of a fillet weld is taken equal to the overall length minus twice the weld size. The deduction is made to allow for craters to be formed at the ends of welded length.

How to Calculate Length of Butt Weld given Efficiency of Welded Joint?

Length of Butt Weld given Efficiency of Welded Joint calculator uses Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints) to calculate the Length of Weld, Length of Butt Weld given Efficiency of Welded Joint is a method to determine the minimum length of the Weld between two plates to hold them together against acting Tensile Force, for known efficiency of the Weld Beads. Length of Weld is denoted by L symbol.

How to calculate Length of Butt Weld given Efficiency of Welded Joint using this online calculator? To use this online calculator for Length of Butt Weld given Efficiency of Welded Joint, enter Tensile Force on Welded Plates (P), Tensile Stress in Weld (σ_t), Welded Base Plate Thickness (t_p) & Efficiency of Welded Joints (η) and hit the calculate button. Here is how the Length of Butt Weld given Efficiency of Welded Joint calculation can be explained with given input values -> 19511.35 = 16500/(56400000*0.018*0.833).

FAQ

What is Length of Butt Weld given Efficiency of Welded Joint?

Length of Butt Weld given Efficiency of Welded Joint is a method to determine the minimum length of the Weld between two plates to hold them together against acting Tensile Force, for known efficiency of the Weld Beads and is represented as L = P/(σ_t*t_p*η) or Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints). Tensile Force on Welded Plates is the stretching force acting on the plates that are welded, Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension, Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate & The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.

How to calculate Length of Butt Weld given Efficiency of Welded Joint?

Length of Butt Weld given Efficiency of Welded Joint is a method to determine the minimum length of the Weld between two plates to hold them together against acting Tensile Force, for known efficiency of the Weld Beads is calculated using Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints). To calculate Length of Butt Weld given Efficiency of Welded Joint, you need Tensile Force on Welded Plates (P), Tensile Stress in Weld (σ_t), Welded Base Plate Thickness (t_p) & Efficiency of Welded Joints (η). With our tool, you need to enter the respective value for Tensile Force on Welded Plates, Tensile Stress in Weld, Welded Base Plate Thickness & Efficiency of Welded Joints and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length of Weld?

In this formula, Length of Weld uses Tensile Force on Welded Plates, Tensile Stress in Weld, Welded Base Plate Thickness & Efficiency of Welded Joints. We can use 1 other way(s) to calculate the same, which is/are as follows -

Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Throat Thickness of Weld)

Home

FREE PDFs

🔍 Search