Length of Settling Zone given Detention Time Calculator

✖Detention time is the length of time water is retained in a vessel or basin.ⓘ Detention time [T_d]			+10% -10%
✖Discharge is the rate of flow of a liquid.ⓘ Discharge [Q]			+10% -10%
✖Width is the measurement or extent of something from side to side.ⓘ Width [w]			+10% -10%
✖Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.ⓘ Height of Crack [h]			+10% -10%

✖Length is the measurement or extent of something from end to end.ⓘ Length of Settling Zone given Detention Time [L]

⎘ Copy

👎

Formula

✖

Length of Settling Zone given Detention Time

Formula

`"L" = ("T"_{"d"}*"Q")/("w"*"h")`

Example

`"6.615721m"=("3min"*"1.01m³/s")/("2.29m"*"12000mm")`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Length of Settling Zone given Detention Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length = (Detention time*Discharge)/(Width*Height of Crack)
L = (T_d*Q)/(w*h)
This formula uses 5 Variables

Variables Used

Length - (Measured in Meter) - Length is the measurement or extent of something from end to end.
Detention time - (Measured in Second) - Detention time is the length of time water is retained in a vessel or basin.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Width - (Measured in Meter) - Width is the measurement or extent of something from side to side.
Height of Crack - (Measured in Meter) - Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.

STEP 1: Convert Input(s) to Base Unit

Detention time: 3 Minute --> 180 Second (Check conversion here)
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Width: 2.29 Meter --> 2.29 Meter No Conversion Required
Height of Crack: 12000 Millimeter --> 12 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = (T_d*Q)/(w*h) --> (180*1.01)/(2.29*12)

Evaluating ... ...

L = 6.61572052401747

STEP 3: Convert Result to Output's Unit

6.61572052401747 Meter --> No Conversion Required

FINAL ANSWER

6.61572052401747 ≈ 6.615721 Meter <-- Length

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1: Sedimentation » Length of Settling Zone » Length of Settling Zone given Detention Time

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 600+ more calculators!

< 4 Length of Settling Zone Calculators

Length of Settling Zone given Height at Outlet Zone with respect to Discharge

Go Length = (Outer Height*Discharge)/(Width*Height of Crack*Falling Speed)

Length of Settling Zone given Detention Time

Go Length = (Detention time*Discharge)/(Width*Height of Crack)

Length of Settling Zone given Vertical Falling Speed in Sedimentation Tank

Go Length = Discharge/(Settling Velocity*Width)

Length of Settling Zone given Surface Area of Sedimentation Tank

Go Length = Area/Width

Length of Settling Zone given Detention Time Formula

Length = (Detention time*Discharge)/(Width*Height of Crack)
L = (T_d*Q)/(w*h)

What is detention time?

Detention time is the time required for a given amount of water or wastewater to pass through a tank at a given rate of flow.

How to Calculate Length of Settling Zone given Detention Time?

Length of Settling Zone given Detention Time calculator uses Length = (Detention time*Discharge)/(Width*Height of Crack) to calculate the Length, Length of Settling Zone given Detention Time is quantity with dimension distance. It is calculated in meters. Length is denoted by L symbol.

How to calculate Length of Settling Zone given Detention Time using this online calculator? To use this online calculator for Length of Settling Zone given Detention Time, enter Detention time (T_d), Discharge (Q), Width (w) & Height of Crack (h) and hit the calculate button. Here is how the Length of Settling Zone given Detention Time calculation can be explained with given input values -> 6.615721 = (180*1.01)/(2.29*12).

FAQ

What is Length of Settling Zone given Detention Time?

Length of Settling Zone given Detention Time is quantity with dimension distance. It is calculated in meters and is represented as L = (T_d*Q)/(w*h) or Length = (Detention time*Discharge)/(Width*Height of Crack). Detention time is the length of time water is retained in a vessel or basin, Discharge is the rate of flow of a liquid, Width is the measurement or extent of something from side to side & Height of Crack is the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.

How to calculate Length of Settling Zone given Detention Time?

Length of Settling Zone given Detention Time is quantity with dimension distance. It is calculated in meters is calculated using Length = (Detention time*Discharge)/(Width*Height of Crack). To calculate Length of Settling Zone given Detention Time, you need Detention time (T_d), Discharge (Q), Width (w) & Height of Crack (h). With our tool, you need to enter the respective value for Detention time, Discharge, Width & Height of Crack and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length?

In this formula, Length uses Detention time, Discharge, Width & Height of Crack. We can use 3 other way(s) to calculate the same, which is/are as follows -

Length = Discharge/(Settling Velocity*Width)
Length = (Outer Height*Discharge)/(Width*Height of Crack*Falling Speed)
Length = Area/Width

Home

FREE PDFs

🔍 Search