Length of the Crest when Discharge (Q) Passing Over the Weir is given Calculator

Main Category	Engineering ↺
Engineering	Civil ↺
Civil	Hydraulics and Waterworks ↺
Hydraulics and Waterworks	Flow Over Notches and Weirs ↺
Flow Over Notches and Weirs	Flow Over a Rectangular Sharp-Crested Weir or Notch ↺

✖Discharge is the rate of flow of a liquidⓘ Discharge [Q]			+10% -10%
✖The coefficient of discharge rectangular portion is considered in discharge through the trapezoidal notch.ⓘ coefficient of discharge rectangular [C d1]			+10% -10%
✖The Acceleration Due To Gravity is acceleration gained by an object because of gravitational force.ⓘ Acceleration Due To Gravity [g]			+10% -10%
✖Head is defined as the height of water columnsⓘ Head [H]			+10% -10%
✖additional head is the applied head due to the velocity of approachⓘ additional head [_ha]			+10% -10%

✖Length is the measurement or extent of something from end to end.ⓘ Length of the Crest when Discharge (Q) Passing Over the Weir is given [l]

⎘ Copy

👎

Formula

Reset

👍

Credits

M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 400+ more calculators!

Length of the Crest when Discharge (Q) Passing Over the Weir is given Solution

STEP 0: Pre-Calculation Summary

Formula Used

length = (Discharge*3)/(2*coefficient of Discharge rectangular*sqrt(2*Acceleration Due To Gravity)*((Head+additional Head)^(3/2)-additional Head^(3/2)))
l = (Q*3)/(2*C d1*sqrt(2*g)*((H+_ha)^(3/2)-_ha^(3/2)))
This formula uses 1 Functions, 5 Variables

Functions Used

sqrt - Squre root function, sqrt(Number)

Variables Used

Discharge - Discharge is the rate of flow of a liquid (Measured in Meter³ per Second)
coefficient of discharge rectangular- The coefficient of discharge rectangular portion is considered in discharge through the trapezoidal notch.
Acceleration Due To Gravity - The Acceleration Due To Gravity is acceleration gained by an object because of gravitational force. (Measured in Meter per Square Second)
Head - Head is defined as the height of water columns (Measured in Meter)
additional head - additional head is the applied head due to the velocity of approach (Measured in Meter)

STEP 1: Convert Input(s) to Base Unit

Discharge: 1 Meter³ per Second --> 1 Meter³ per Second No Conversion Required
coefficient of discharge rectangular: 0.63 --> No Conversion Required
Acceleration Due To Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
Head: 1 Meter --> 1 Meter No Conversion Required
additional head: 50 Meter --> 50 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

l = (Q*3)/(2*C d1*sqrt(2*g)*((H+_ha)^(3/2)-_ha^(3/2))) --> (1*3)/(2*0.63*sqrt(2*9.8)*((1+50)^(3/2)-50^(3/2)))

Evaluating ... ...

l = 0.0504530586325648

STEP 3: Convert Result to Output's Unit

0.0504530586325648 Meter --> No Conversion Required

FINAL ANSWER

0.0504530586325648 Meter <-- Length

(Calculation completed in 00.031 seconds)

You are here

< 11 Other formulas that you can solve using the same Inputs

Periodic time of SHM for compound pendulum in terms of radius of gyration

time_period_compound_pendulum = 2*pi*sqrt(((Radius of gyration^2)+(Distance of point of suspension of pendulum from the center of gravity^2))/(Acceleration Due To Gravity*Distance of point of suspension of pendulum from the center of gravity)) Go

Restoring torque for simple pendulum

torque = Mass*Acceleration Due To Gravity*sin(Angle through which the string is displaced)*Length of the string Go

Minimum periodic time of SHM for compound pendulum

time_period_shm = 2*pi*sqrt(2*Radius of gyration/Acceleration Due To Gravity) Go

Periodic time for one beat of SHM

time_period_shm = pi*sqrt(Length of the string/Acceleration Due To Gravity) Go

Periodic time for SHM

time_period_shm = 2*pi*sqrt(Displacement/Acceleration Due To Gravity) Go

Force of Friction between the cylinder and the surface of inclined plane if cylinder is rolling without slipping down a ramp

force = (Mass*Acceleration Due To Gravity*sin(Angle of Inclination))/3 Go

Deflection of spring when mass m is attached to it

deflection_of_spring = Mass*Acceleration Due To Gravity/Stiffness of spring Go

Final Velocity of freely falling body from height h, when it reaches ground

velocity_on_reaching_ground = sqrt(2*Acceleration Due To Gravity*Height) Go

Archimedes Principle

archimedes_principle = Density*Acceleration Due To Gravity*Velocity Go

Potential Energy

potential_energy = Mass*Acceleration Due To Gravity*Height Go

Pressure when density and height are given

pressure = Density*Acceleration Due To Gravity*Height Go

< 11 Other formulas that calculate the same Output

Unbraced Member Length when Critical Bending Moment of Rectangular Beam is Given

length = (pi/Critical Bending Moment)*(sqrt(Modulus Of Elasticity*Moment of Inertia about Minor Axis*Shear Modulus of Elasticity*Torsional constant)) Go

Length over which Deformation Takes Place when Strain Energy in Shear is Given

length = 2*Strain Energy*Shear Area*Shear Modulus of Elasticity/(Shear Force^2) Go

Length of rectangle when diagonal and angle between two diagonal are given

length = Diagonal*sin(sinϑ/2) Go

Length of a rectangle in terms of diagonal and angle between diagonal and breadth

length = Diagonal*sin(sinϑ) Go

Length of rectangle when diagonal and breadth are given

length = sqrt(Diagonal^2-Breadth^2) Go

Length of rectangle when perimeter and breadth are given

length = (Perimeter-2*Breadth)/2 Go

Length of rectangle when area and breadth are given

length = Area/Breadth Go

Length of the major axis of an ellipse (b>a)

length = 2*Major axis Go

Length of major axis of an ellipse (a>b)

length = 2*Major axis Go

Length of minor axis of an ellipse (a>b)

length = 2*Minor axis Go

Length of minor axis of an ellipse (b>a)

length = 2*Minor axis Go

Length of the Crest when Discharge (Q) Passing Over the Weir is given Formula

What is Coefficient of Discharge?

Discharge of Coefficient is the ratio of actual discharge through a nozzle or orifice to the theoretical discharge.

How to Calculate Length of the Crest when Discharge (Q) Passing Over the Weir is given?

Length of the Crest when Discharge (Q) Passing Over the Weir is given calculator uses length = (Discharge*3)/(2*coefficient of Discharge rectangular*sqrt(2*Acceleration Due To Gravity)*((Head+additional Head)^(3/2)-additional Head^(3/2))) to calculate the Length, The Length of the Crest when Discharge (Q) Passing Over the Weir is given as it applies to the area of reclamation can be defined as ' The distance, measured along the axis. Length and is denoted by l symbol.

How to calculate Length of the Crest when Discharge (Q) Passing Over the Weir is given using this online calculator? To use this online calculator for Length of the Crest when Discharge (Q) Passing Over the Weir is given, enter Discharge (Q), coefficient of discharge rectangular (C d1), Acceleration Due To Gravity (g), Head (H) and additional head (_ha) and hit the calculate button. Here is how the Length of the Crest when Discharge (Q) Passing Over the Weir is given calculation can be explained with given input values -> 0.050453 = (1*3)/(2*0.63*sqrt(2*9.8)*((1+50)^(3/2)-50^(3/2))).

FAQ

What is Length of the Crest when Discharge (Q) Passing Over the Weir is given?

The Length of the Crest when Discharge (Q) Passing Over the Weir is given as it applies to the area of reclamation can be defined as ' The distance, measured along the axis and is represented as l = (Q*3)/(2*C d1*sqrt(2*g)*((H+_ha)^(3/2)-_ha^(3/2))) or length = (Discharge*3)/(2*coefficient of Discharge rectangular*sqrt(2*Acceleration Due To Gravity)*((Head+additional Head)^(3/2)-additional Head^(3/2))). Discharge is the rate of flow of a liquid, The coefficient of discharge rectangular portion is considered in discharge through the trapezoidal notch, The Acceleration Due To Gravity is acceleration gained by an object because of gravitational force, Head is defined as the height of water columns and additional head is the applied head due to the velocity of approach.

How to calculate Length of the Crest when Discharge (Q) Passing Over the Weir is given?

The Length of the Crest when Discharge (Q) Passing Over the Weir is given as it applies to the area of reclamation can be defined as ' The distance, measured along the axis is calculated using length = (Discharge*3)/(2*coefficient of Discharge rectangular*sqrt(2*Acceleration Due To Gravity)*((Head+additional Head)^(3/2)-additional Head^(3/2))). To calculate Length of the Crest when Discharge (Q) Passing Over the Weir is given, you need Discharge (Q), coefficient of discharge rectangular (C d1), Acceleration Due To Gravity (g), Head (H) and additional head (_ha). With our tool, you need to enter the respective value for Discharge, coefficient of discharge rectangular, Acceleration Due To Gravity, Head and additional head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Length?

In this formula, Length uses Discharge, coefficient of discharge rectangular, Acceleration Due To Gravity, Head and additional head. We can use 11 other way(s) to calculate the same, which is/are as follows -

length = sqrt(Diagonal^2-Breadth^2)
length = Area/Breadth
length = (Perimeter-2*Breadth)/2
length = Diagonal*sin(sinϑ)
length = Diagonal*sin(sinϑ/2)
length = 2*Major axis
length = 2*Major axis
length = 2*Minor axis
length = 2*Minor axis
length = (pi/Critical Bending Moment)*(sqrt(Modulus Of Elasticity*Moment of Inertia about Minor Axis*Shear Modulus of Elasticity*Torsional constant))
length = 2*Strain Energy*Shear Area*Shear Modulus of Elasticity/(Shear Force^2)

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!