Magnitude Response of STC Network for High-Pass Filter Calculator

✖DC Gain refers to the ratio of output to input in a system or device, often used in the context of electronics or signal processing.ⓘ DC Gain [K]			+10% -10%
✖Pole Frequency High Pass is the point at which the signal has been attenuated by 3dB (in a bandpass filter).ⓘ Pole Frequency High Pass [f_hp]			+10% -10%
✖Total pole frequency refers to the maximum frequency at which a system can stably operate, determined by the combined effect of all poles in the system's transfer function.ⓘ Total Pole Frequency [f_t]			+10% -10%

✖The Magnitude Response of High Pass Filter network for high-pass filter gives the amplitude of the output voltage.ⓘ Magnitude Response of STC Network for High-Pass Filter [M_hp]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Amplifier Functions and Network Formulas PDF PDF Image

Magnitude Response of STC Network for High-Pass Filter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Magnitude Response of High Pass Filter = (modulus(DC Gain))/(sqrt(1-(Pole Frequency High Pass/Total Pole Frequency)^2))
M_hp = (modulus(K))/(sqrt(1-(f_hp/f_t)^2))
This formula uses 2 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
modulus - Modulus of a number is the remainder when that number is divided by another number., modulus

Variables Used

Magnitude Response of High Pass Filter - The Magnitude Response of High Pass Filter network for high-pass filter gives the amplitude of the output voltage.
DC Gain - DC Gain refers to the ratio of output to input in a system or device, often used in the context of electronics or signal processing.
Pole Frequency High Pass - (Measured in Hertz) - Pole Frequency High Pass is the point at which the signal has been attenuated by 3dB (in a bandpass filter).
Total Pole Frequency - (Measured in Hertz) - Total pole frequency refers to the maximum frequency at which a system can stably operate, determined by the combined effect of all poles in the system's transfer function.

STEP 1: Convert Input(s) to Base Unit

DC Gain: 0.49 --> No Conversion Required
Pole Frequency High Pass: 3.32 Hertz --> 3.32 Hertz No Conversion Required
Total Pole Frequency: 90 Hertz --> 90 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_hp = (modulus(K))/(sqrt(1-(f_hp/f_t)^2)) --> (modulus(0.49))/(sqrt(1-(3.32/90)^2))

Evaluating ... ...

M_hp = 0.490333734225576

STEP 3: Convert Result to Output's Unit

0.490333734225576 --> No Conversion Required

FINAL ANSWER

0.490333734225576 ≈ 0.490334 <-- Magnitude Response of High Pass Filter

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Electronics » Amplifiers » Amplifier Functions and Network » STC Filter » Magnitude Response of STC Network for High-Pass Filter

Credits

Created by Nikita Suryawanshi

Vellore Institute of Technology (VIT), Vellore

Nikita Suryawanshi has created this Calculator and 100+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< STC Filter Calculators

Magnitude Response of STC Network for High-Pass Filter

LaTeX Go Magnitude Response of High Pass Filter = (modulus(DC Gain))/(sqrt(1-(Pole Frequency High Pass/Total Pole Frequency)^2))

Magnitude Response of STC Network for Low-Pass Filter

LaTeX Go Magnitude Response of Low-Pass Filter = (modulus(DC Gain))/(sqrt(1+(Total Pole Frequency/Pole Frequency High Pass)^2))

Phase Response Angle of STC Network for High-Pass Filter

LaTeX Go Phase Angle of STC = arctan(Pole Frequency High Pass/Total Pole Frequency)

Time Constant of STC Network

LaTeX Go Time Constant = Load Inductance/Load Resistance

Magnitude Response of STC Network for High-Pass Filter Formula

LaTeX Go

Magnitude Response of High Pass Filter = (modulus(DC Gain))/(sqrt(1-(Pole Frequency High Pass/Total Pole Frequency)^2))
M_hp = (modulus(K))/(sqrt(1-(f_hp/f_t)^2))

What is magnitude response?

The relationship between output Y and input X as a function of signal frequency is known as frequency response. We can plot the phase difference (output relative to the input) as a function of frequency. This is known as the phase response.

How to Calculate Magnitude Response of STC Network for High-Pass Filter?

Magnitude Response of STC Network for High-Pass Filter calculator uses Magnitude Response of High Pass Filter = (modulus(DC Gain))/(sqrt(1-(Pole Frequency High Pass/Total Pole Frequency)^2)) to calculate the Magnitude Response of High Pass Filter, Magnitude Response of STC Network for High-Pass Filter exhibits attenuation at lower frequencies while allowing higher frequencies to pass, characterized by a gradual increase in gain beyond the cutoff frequency. Magnitude Response of High Pass Filter is denoted by M_hp symbol.

How to calculate Magnitude Response of STC Network for High-Pass Filter using this online calculator? To use this online calculator for Magnitude Response of STC Network for High-Pass Filter, enter DC Gain (K), Pole Frequency High Pass (f_hp) & Total Pole Frequency (f_t) and hit the calculate button. Here is how the Magnitude Response of STC Network for High-Pass Filter calculation can be explained with given input values -> 0.490334 = (modulus(0.49))/(sqrt(1-(3.32/90)^2)).

FAQ

What is Magnitude Response of STC Network for High-Pass Filter?

Magnitude Response of STC Network for High-Pass Filter exhibits attenuation at lower frequencies while allowing higher frequencies to pass, characterized by a gradual increase in gain beyond the cutoff frequency and is represented as M_hp = (modulus(K))/(sqrt(1-(f_hp/f_t)^2)) or Magnitude Response of High Pass Filter = (modulus(DC Gain))/(sqrt(1-(Pole Frequency High Pass/Total Pole Frequency)^2)). DC Gain refers to the ratio of output to input in a system or device, often used in the context of electronics or signal processing, Pole Frequency High Pass is the point at which the signal has been attenuated by 3dB (in a bandpass filter) & Total pole frequency refers to the maximum frequency at which a system can stably operate, determined by the combined effect of all poles in the system's transfer function.

How to calculate Magnitude Response of STC Network for High-Pass Filter?

Magnitude Response of STC Network for High-Pass Filter exhibits attenuation at lower frequencies while allowing higher frequencies to pass, characterized by a gradual increase in gain beyond the cutoff frequency is calculated using Magnitude Response of High Pass Filter = (modulus(DC Gain))/(sqrt(1-(Pole Frequency High Pass/Total Pole Frequency)^2)). To calculate Magnitude Response of STC Network for High-Pass Filter, you need DC Gain (K), Pole Frequency High Pass (f_hp) & Total Pole Frequency (f_t). With our tool, you need to enter the respective value for DC Gain, Pole Frequency High Pass & Total Pole Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Spanish French German Russian Italian Portuguese Polish Dutch

Home

FREE PDFs

🔍 Search