Maximum limit size of shaft from maximum interference of fit Calculator

✖Minimum Limit Size of Hole in Transition Fit is the minimum diameter of holes.ⓘ Minimum Limit Size of Hole in Transition Fit [H_ms]			+10% -10%
✖Maximum Interference is the possible overlap between two given objects.ⓘ Maximum Interference [I_max]			+10% -10%

✖Maximum Limit Size of Shaft in Transition Fit is the maximum diameter of shaft possible.ⓘ Maximum limit size of shaft from maximum interference of fit [S_tf]

⎘ Copy

👎

Formula

✖

Maximum limit size of shaft from maximum interference of fit

Formula

`"S"_{"tf"} = "H"_{"ms"}-"I"_{"max"}`

Example

`"3mm"="6.49mm"-"3.49mm"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Maximum limit size of shaft from maximum interference of fit Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Limit Size of Shaft in Transition Fit = Minimum Limit Size of Hole in Transition Fit-Maximum Interference
S_tf = H_ms-I_max
This formula uses 3 Variables

Variables Used

Maximum Limit Size of Shaft in Transition Fit - (Measured in Meter) - Maximum Limit Size of Shaft in Transition Fit is the maximum diameter of shaft possible.
Minimum Limit Size of Hole in Transition Fit - (Measured in Meter) - Minimum Limit Size of Hole in Transition Fit is the minimum diameter of holes.
Maximum Interference - (Measured in Meter) - Maximum Interference is the possible overlap between two given objects.

STEP 1: Convert Input(s) to Base Unit

Minimum Limit Size of Hole in Transition Fit: 6.49 Millimeter --> 0.00649 Meter (Check conversion here)
Maximum Interference: 3.49 Millimeter --> 0.00349 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_tf = H_ms-I_max --> 0.00649-0.00349

Evaluating ... ...

S_tf = 0.003

STEP 3: Convert Result to Output's Unit

0.003 Meter -->3 Millimeter (Check conversion here)

FINAL ANSWER

3 Millimeter <-- Maximum Limit Size of Shaft in Transition Fit

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metrology » Transition fits » Maximum limit size of shaft from maximum interference of fit

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< 3 Transition fits Calculators

Maximum limit size of shaft from maximum interference of fit

Go Maximum Limit Size of Shaft in Transition Fit = Minimum Limit Size of Hole in Transition Fit-Maximum Interference

Minimum limit size of hole from maximum interference of fit

Go Minimum Limit Size of Hole in Transition Fit = Maximum Interference+Maximum Limit Size of Shaft in Transition Fit

Maximum interference

Go Maximum Interference = Minimum Limit Size of Hole in Transition Fit-Maximum Limit Size of Shaft in Transition Fit

Maximum limit size of shaft from maximum interference of fit Formula

Maximum Limit Size of Shaft in Transition Fit = Minimum Limit Size of Hole in Transition Fit-Maximum Interference
S_tf = H_ms-I_max

What is Clearance fit ?

The maximum size of the shaft is smaller than the minimum hole and as a result,
there will always be clearance, varying depending upon the actual sizes of the shaft and hole. Such a fit is termed as clearance fit.

How to Calculate Maximum limit size of shaft from maximum interference of fit?

Maximum limit size of shaft from maximum interference of fit calculator uses Maximum Limit Size of Shaft in Transition Fit = Minimum Limit Size of Hole in Transition Fit-Maximum Interference to calculate the Maximum Limit Size of Shaft in Transition Fit, The Maximum limit size of shaft from maximum interference of fit formula is defined as the maximum diameter of shaft possible for given fit. Maximum Limit Size of Shaft in Transition Fit is denoted by S_tf symbol.

How to calculate Maximum limit size of shaft from maximum interference of fit using this online calculator? To use this online calculator for Maximum limit size of shaft from maximum interference of fit, enter Minimum Limit Size of Hole in Transition Fit (H_ms) & Maximum Interference (I_max) and hit the calculate button. Here is how the Maximum limit size of shaft from maximum interference of fit calculation can be explained with given input values -> 3000 = 0.00649-0.00349.

FAQ

What is Maximum limit size of shaft from maximum interference of fit?

The Maximum limit size of shaft from maximum interference of fit formula is defined as the maximum diameter of shaft possible for given fit and is represented as S_tf = H_ms-I_max or Maximum Limit Size of Shaft in Transition Fit = Minimum Limit Size of Hole in Transition Fit-Maximum Interference. Minimum Limit Size of Hole in Transition Fit is the minimum diameter of holes & Maximum Interference is the possible overlap between two given objects.

How to calculate Maximum limit size of shaft from maximum interference of fit?

The Maximum limit size of shaft from maximum interference of fit formula is defined as the maximum diameter of shaft possible for given fit is calculated using Maximum Limit Size of Shaft in Transition Fit = Minimum Limit Size of Hole in Transition Fit-Maximum Interference. To calculate Maximum limit size of shaft from maximum interference of fit, you need Minimum Limit Size of Hole in Transition Fit (H_ms) & Maximum Interference (I_max). With our tool, you need to enter the respective value for Minimum Limit Size of Hole in Transition Fit & Maximum Interference and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search