Modulus of elasticity for thin spherical shell given strain and internal fluid pressure Solution

STEP 0: Pre-Calculation Summary
Formula Used
Modulus of Elasticity Of Thin Shell = ((Internal Pressure*Diameter of Sphere)/(4*Thickness Of Thin Spherical Shell*Strain in thin shell))*(1-Poisson's Ratio)
E = ((Pi*D)/(4*t*ε))*(1-𝛎)
This formula uses 6 Variables
Variables Used
Modulus of Elasticity Of Thin Shell - (Measured in Pascal) - Modulus of Elasticity Of Thin Shell is a quantity that measures an object or substance's resistance to being deformed elastically when a stress is applied to it.
Internal Pressure - (Measured in Pascal) - Internal Pressure is a measure of how the internal energy of a system changes when it expands or contracts at a constant temperature.
Diameter of Sphere - (Measured in Meter) - Diameter of Sphere, is a chord that runs through the center point of the circle. It is the longest possible chord of any circle. The center of a circle is the midpoint of its diameter.
Thickness Of Thin Spherical Shell - (Measured in Meter) - Thickness Of Thin Spherical Shell is the distance through an object.
Strain in thin shell - Strain in thin shell is simply the measure of how much an object is stretched or deformed.
Poisson's Ratio - Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5.
STEP 1: Convert Input(s) to Base Unit
Internal Pressure: 0.053 Megapascal --> 53000 Pascal (Check conversion here)
Diameter of Sphere: 1500 Millimeter --> 1.5 Meter (Check conversion here)
Thickness Of Thin Spherical Shell: 12 Millimeter --> 0.012 Meter (Check conversion here)
Strain in thin shell: 3 --> No Conversion Required
Poisson's Ratio: 0.3 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
E = ((Pi*D)/(4*t*ε))*(1-𝛎) --> ((53000*1.5)/(4*0.012*3))*(1-0.3)
Evaluating ... ...
E = 386458.333333333
STEP 3: Convert Result to Output's Unit
386458.333333333 Pascal -->0.386458333333333 Megapascal (Check conversion here)
FINAL ANSWER
0.386458333333333 0.386458 Megapascal <-- Modulus of Elasticity Of Thin Shell
(Calculation completed in 00.004 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

17 Change in Dimension of Thin Spherical Shell due to Internal Pressure Calculators

Diameter of spherical shell given change in diameter of thin spherical shells
Go Diameter of Sphere = sqrt((Change in Diameter*(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell)/(1-Poisson's Ratio))/(Internal Pressure))
Thickness of spherical shell given change in diameter of thin spherical shells
Go Thickness Of Thin Spherical Shell = ((Internal Pressure*(Diameter of Sphere^2))/(4*Change in Diameter*Modulus of Elasticity Of Thin Shell))*(1-Poisson's Ratio)
Modulus of elasticity given change in diameter of thin spherical shells
Go Modulus of Elasticity Of Thin Shell = ((Internal Pressure*(Diameter of Sphere^2))/(4*Thickness Of Thin Spherical Shell*Change in Diameter))*(1-Poisson's Ratio)
Change in diameter of thin spherical shell
Go Change in Diameter = ((Internal Pressure*(Diameter of Sphere^2))/(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell))*(1-Poisson's Ratio)
Modulus of elasticity for thin spherical shell given strain and internal fluid pressure
Go Modulus of Elasticity Of Thin Shell = ((Internal Pressure*Diameter of Sphere)/(4*Thickness Of Thin Spherical Shell*Strain in thin shell))*(1-Poisson's Ratio)
Internal fluid pressure in thin spherical shell given strain in any one direction
Go Internal Pressure = (Strain in thin shell*(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell)/(1-Poisson's Ratio))/(Diameter of Sphere)
Internal fluid pressure given change in diameter of thin spherical shells
Go Internal Pressure = (Change in Diameter*(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell)/(1-Poisson's Ratio))/(Diameter of Sphere^2)
Thickness of thin spherical shell given strain in any one direction
Go Thickness Of Thin Spherical Shell = ((Internal Pressure*Diameter of Sphere)/(4*Strain in thin shell*Modulus of Elasticity Of Thin Shell))*(1-Poisson's Ratio)
Diameter of thin spherical shell given strain in any one direction
Go Diameter of Sphere = (Strain in thin shell*(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell)/(1-Poisson's Ratio))/(Internal Pressure)
Poisson's ratio given change in diameter of thin spherical shells
Go Poisson's Ratio = 1-(Change in Diameter*(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell)/(Internal Pressure*(Diameter of Sphere^2)))
Strain in thin spherical shell given internal fluid pressure
Go Strain in thin shell = ((Internal Pressure*Diameter of Sphere)/(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell))*(1-Poisson's Ratio)
Poisson's ratio for thin spherical shell given strain and internal fluid pressure
Go Poisson's Ratio = 1-(Strain in thin shell*(4*Thickness Of Thin Spherical Shell*Modulus of Elasticity Of Thin Shell)/(Internal Pressure*Diameter of Sphere))
Hoop stress in thin spherical shell given strain in any one direction and Poisson's ratio
Go Hoop Stress in Thin shell = (Strain in thin shell/(1-Poisson's Ratio))*Modulus of Elasticity Of Thin Shell
Modulus of elasticity of thin spherical shell given strain in any one direction
Go Modulus of Elasticity Of Thin Shell = (Hoop Stress in Thin shell/Strain in thin shell)*(1-Poisson's Ratio)
Hoop stress induced in thin spherical shell given strain in any one direction
Go Hoop Stress in Thin shell = (Strain in thin shell/(1-Poisson's Ratio))*Modulus of Elasticity Of Thin Shell
Strain in any one direction of thin spherical shell
Go Strain in thin shell = (Hoop Stress in Thin shell/Modulus of Elasticity Of Thin Shell)*(1-Poisson's Ratio)
Poisson's ratio for thin spherical shell given strain in any one direction
Go Poisson's Ratio = 1-(Modulus of Elasticity Of Thin Shell*Strain in thin shell/Hoop Stress in Thin shell)

Modulus of elasticity for thin spherical shell given strain and internal fluid pressure Formula

Modulus of Elasticity Of Thin Shell = ((Internal Pressure*Diameter of Sphere)/(4*Thickness Of Thin Spherical Shell*Strain in thin shell))*(1-Poisson's Ratio)
E = ((Pi*D)/(4*t*ε))*(1-𝛎)

How do you reduce stress hoop?

We can suggest that the most efficient method is to apply double cold expansion with high interferences along with axial compression with strain equal to 0.5%. This technique helps to reduce the absolute value of hoop residual stresses by 58%, and decrease radial stresses by 75%.

How to Calculate Modulus of elasticity for thin spherical shell given strain and internal fluid pressure?

Modulus of elasticity for thin spherical shell given strain and internal fluid pressure calculator uses Modulus of Elasticity Of Thin Shell = ((Internal Pressure*Diameter of Sphere)/(4*Thickness Of Thin Spherical Shell*Strain in thin shell))*(1-Poisson's Ratio) to calculate the Modulus of Elasticity Of Thin Shell, Modulus of elasticity for thin spherical shell given strain and internal fluid pressure formula is defined as a quantity that measures an object or substance's resistance to being deformed elastically (i.e., non-permanently) when stress is applied to it. Modulus of Elasticity Of Thin Shell is denoted by E symbol.

How to calculate Modulus of elasticity for thin spherical shell given strain and internal fluid pressure using this online calculator? To use this online calculator for Modulus of elasticity for thin spherical shell given strain and internal fluid pressure, enter Internal Pressure (Pi), Diameter of Sphere (D), Thickness Of Thin Spherical Shell (t), Strain in thin shell (ε) & Poisson's Ratio (𝛎) and hit the calculate button. Here is how the Modulus of elasticity for thin spherical shell given strain and internal fluid pressure calculation can be explained with given input values -> 3.9E-7 = ((53000*1.5)/(4*0.012*3))*(1-0.3).

FAQ

What is Modulus of elasticity for thin spherical shell given strain and internal fluid pressure?
Modulus of elasticity for thin spherical shell given strain and internal fluid pressure formula is defined as a quantity that measures an object or substance's resistance to being deformed elastically (i.e., non-permanently) when stress is applied to it and is represented as E = ((Pi*D)/(4*t*ε))*(1-𝛎) or Modulus of Elasticity Of Thin Shell = ((Internal Pressure*Diameter of Sphere)/(4*Thickness Of Thin Spherical Shell*Strain in thin shell))*(1-Poisson's Ratio). Internal Pressure is a measure of how the internal energy of a system changes when it expands or contracts at a constant temperature, Diameter of Sphere, is a chord that runs through the center point of the circle. It is the longest possible chord of any circle. The center of a circle is the midpoint of its diameter, Thickness Of Thin Spherical Shell is the distance through an object, Strain in thin shell is simply the measure of how much an object is stretched or deformed & Poisson's Ratio is defined as the ratio of the lateral and axial strain. For many metals and alloys, values of Poisson’s ratio range between 0.1 and 0.5.
How to calculate Modulus of elasticity for thin spherical shell given strain and internal fluid pressure?
Modulus of elasticity for thin spherical shell given strain and internal fluid pressure formula is defined as a quantity that measures an object or substance's resistance to being deformed elastically (i.e., non-permanently) when stress is applied to it is calculated using Modulus of Elasticity Of Thin Shell = ((Internal Pressure*Diameter of Sphere)/(4*Thickness Of Thin Spherical Shell*Strain in thin shell))*(1-Poisson's Ratio). To calculate Modulus of elasticity for thin spherical shell given strain and internal fluid pressure, you need Internal Pressure (Pi), Diameter of Sphere (D), Thickness Of Thin Spherical Shell (t), Strain in thin shell (ε) & Poisson's Ratio (𝛎). With our tool, you need to enter the respective value for Internal Pressure, Diameter of Sphere, Thickness Of Thin Spherical Shell, Strain in thin shell & Poisson's Ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Modulus of Elasticity Of Thin Shell?
In this formula, Modulus of Elasticity Of Thin Shell uses Internal Pressure, Diameter of Sphere, Thickness Of Thin Spherical Shell, Strain in thin shell & Poisson's Ratio. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Modulus of Elasticity Of Thin Shell = (Hoop Stress in Thin shell/Strain in thin shell)*(1-Poisson's Ratio)
  • Modulus of Elasticity Of Thin Shell = ((Internal Pressure*(Diameter of Sphere^2))/(4*Thickness Of Thin Spherical Shell*Change in Diameter))*(1-Poisson's Ratio)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!