Credits

Softusvista Office (Pune), India
Team Softusvista has created this Calculator and 500+ more calculators!
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 500+ more calculators!

Molar Volume Solution

STEP 0: Pre-Calculation Summary
Formula Used
molar_volume = (Atomic Weight*Molar Mass)/Density
Vm = (Atomic Wt.*M)/ρ
This formula uses 3 Variables
Variables Used
Atomic Weight - Atomic weight is the average mass of atoms of an element. (Measured in Dalton)
Molar Mass - Molar Mass is the mass of a given substance divided by the amount of substance. (Measured in Gram Per Mole)
Density - The density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object. (Measured in Kilogram per Meter³)
STEP 1: Convert Input(s) to Base Unit
Atomic Weight: 28.085 Dalton --> 4.66359850527478E-26 Kilogram (Check conversion here)
Molar Mass: 44.01 Gram Per Mole --> 0.04401 Kilogram Per Mole (Check conversion here)
Density: 997 Kilogram per Meter³ --> 997 Kilogram per Meter³ No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vm = (Atomic Wt.*M)/ρ --> (4.66359850527478E-26*0.04401)/997
Evaluating ... ...
Vm = 2.05862557890816E-30
STEP 3: Convert Result to Output's Unit
2.05862557890816E-30 Cubic Meter per Mole --> No Conversion Required
FINAL ANSWER
2.05862557890816E-30 Cubic Meter per Mole <-- Molar Volume
(Calculation completed in 00.031 seconds)
You are here

11 Other formulas that you can solve using the same Inputs

Stanton Number (using basic fluid properties)
stanton_number = External convection heat transfer coefficient/(Specific Heat Capacity*Fluid Velocity*Density) Go
Reynolds Number for Non-Circular Tubes
reynolds_number = Density*Fluid Velocity*Characteristic Length/Dynamic viscosity Go
Reynolds Number for Circular Tubes
reynolds_number = Density*Fluid Velocity*Diameter/Dynamic viscosity Go
Thermal Diffusivity
thermal_diffusivity = Thermal Conductivity/(Density*Specific Heat Capacity) Go
Turbulence
turbulent_stress = Density*Dynamic viscosity*Fluid Velocity Go
Pressure when density and height are given
pressure = Density*Acceleration Due To Gravity*Height Go
Inertial Force Per Unit Area
inertial_force_per_unit_area = (Fluid Velocity^2)*Density Go
Molecular Formula
molecular_formula = Molar Mass/Mass of Empirical Formulas Go
Momentum Diffusivity
momentum_diffusivity = Dynamic viscosity/Density Go
Number of atomic sites
number_atomic_sites = Density/Atomic Mass Go
Relative Density
relative_density = Density/Water Density Go

11 Other formulas that calculate the same Output

Molar Volume of real gas using Redlich–Kwong equation
molar_volume = ((1/Pressure)+(Redlich–Kwong parameter b/([R]*Temperature)))/((1/([R]*Temperature))-((sqrt(Temperature)*Redlich–Kwong parameter b)/Redlich–Kwong parameter a)) Go
Molar Volume using Modified Berthelot equation in terms of critical and actual parameters
molar_volume = ([R]*Temperature/Pressure)*(1+(((9*Pressure/Critical Pressure)/(128*Temperature/Critical Temperature))*(1-(6/((Temperature^2)/(Critical Temperature^2)))))) Go
Molar Volume of Real Gas using Berthelot equation
molar_volume = ((1/Pressure)+(Berthelot parameter b/([R]*Temperature)))/((1/([R]*Temperature))-(Temperature/Berthelot parameter a)) Go
Actual of Molar Volume real gas using Reduced Redlich–Kwong equation
molar_volume = Critical Molar Volume*(((1/Reduced Pressure)+(0.26/(3*Reduced Temperature)))/((1/(3*Reduced Temperature))-(0.26*sqrt(Reduced Temperature)))) Go
Molar Volume using Modified Berthelot equation in terms of reduced and actual parameters
molar_volume = ([R]*Temperature/Pressure)*(1+(((9* Reduced Pressure)/(128*Reduced Temperature))*(1-(6/((Reduced Temperature^2)))))) Go
Molar Vapor Volume when dp/dT is Given
molar_volume = Molal liquid volume+((Molal heat of vaporization*Change in temperature)/(Change in pressure*Absolute temperature)) Go
Volume change of lattice
molar_volume = (Lattice Enthalpy-Lattice Energy)/Pressure Go
Actual Molar Volume using Redlich–Kwong equation in terms of a and b
molar_volume = Reduced Molar Volume*(Redlich–Kwong parameter b/((2^(1/3))-1)) Go
Molar Volume of solution if molar conductivity given
molar_volume = (Solution molar conductivity/Specific Conductance) Go
Actual molar volume of real gas using critical and reduced volume
molar_volume = Critical Molar Volume*Reduced Molar Volume Go
Molar volume using kinetic energy per mole
molar_volume = (2/3)*Kinetic energy per mole/Pressure Go

Molar Volume Formula

molar_volume = (Atomic Weight*Molar Mass)/Density
Vm = (Atomic Wt.*M)/ρ

How to Calculate Molar Volume?

Molar Volume calculator uses molar_volume = (Atomic Weight*Molar Mass)/Density to calculate the Molar Volume, Molar Volume is the volume occupied by one mole of a substance which can be a chemical element or a chemical compound at Standard Temperature and Pressure. Molar Volume and is denoted by Vm symbol.

How to calculate Molar Volume using this online calculator? To use this online calculator for Molar Volume, enter Atomic Weight (Atomic Wt.), Molar Mass (M) and Density (ρ) and hit the calculate button. Here is how the Molar Volume calculation can be explained with given input values -> 2.059E-30 = (4.66359850527478E-26*0.04401)/997.

FAQ

What is Molar Volume?
Molar Volume is the volume occupied by one mole of a substance which can be a chemical element or a chemical compound at Standard Temperature and Pressure and is represented as Vm = (Atomic Wt.*M)/ρ or molar_volume = (Atomic Weight*Molar Mass)/Density. Atomic weight is the average mass of atoms of an element, Molar Mass is the mass of a given substance divided by the amount of substance and The density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.
How to calculate Molar Volume?
Molar Volume is the volume occupied by one mole of a substance which can be a chemical element or a chemical compound at Standard Temperature and Pressure is calculated using molar_volume = (Atomic Weight*Molar Mass)/Density. To calculate Molar Volume, you need Atomic Weight (Atomic Wt.), Molar Mass (M) and Density (ρ). With our tool, you need to enter the respective value for Atomic Weight, Molar Mass and Density and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Molar Volume?
In this formula, Molar Volume uses Atomic Weight, Molar Mass and Density. We can use 11 other way(s) to calculate the same, which is/are as follows -
  • molar_volume = Molal liquid volume+((Molal heat of vaporization*Change in temperature)/(Change in pressure*Absolute temperature))
  • molar_volume = (2/3)*Kinetic energy per mole/Pressure
  • molar_volume = (Lattice Enthalpy-Lattice Energy)/Pressure
  • molar_volume = (Solution molar conductivity/Specific Conductance)
  • molar_volume = ((1/Pressure)+(Redlich–Kwong parameter b/([R]*Temperature)))/((1/([R]*Temperature))-((sqrt(Temperature)*Redlich–Kwong parameter b)/Redlich–Kwong parameter a))
  • molar_volume = Critical Molar Volume*Reduced Molar Volume
  • molar_volume = Reduced Molar Volume*(Redlich–Kwong parameter b/((2^(1/3))-1))
  • molar_volume = Critical Molar Volume*(((1/Reduced Pressure)+(0.26/(3*Reduced Temperature)))/((1/(3*Reduced Temperature))-(0.26*sqrt(Reduced Temperature))))
  • molar_volume = ((1/Pressure)+(Berthelot parameter b/([R]*Temperature)))/((1/([R]*Temperature))-(Temperature/Berthelot parameter a))
  • molar_volume = ([R]*Temperature/Pressure)*(1+(((9*Pressure/Critical Pressure)/(128*Temperature/Critical Temperature))*(1-(6/((Temperature^2)/(Critical Temperature^2))))))
  • molar_volume = ([R]*Temperature/Pressure)*(1+(((9* Reduced Pressure)/(128*Reduced Temperature))*(1-(6/((Reduced Temperature^2))))))
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!