Nominal packing cross section given Mean diameter of Conical spring Calculator

✖Mean diameter of conical spring a straight line passing from side to side through the centre of a spring.ⓘ Mean Diameter of Conical Spring [D_m]			+10% -10%
✖Inside diameter is the diameter of the inside surface.ⓘ Inside Diameter [D_i]			+10% -10%

✖The Nominal Packing Cross-section of Bush Seal is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.ⓘ Nominal packing cross section given Mean diameter of Conical spring [w]

⎘ Copy

👎

Formula

✖

Nominal packing cross section given Mean diameter of Conical spring

Formula

`"w" = ("D"_{"m"}-"D"_{"i"})*2/3`

Example

`"10.4mm"=("21mm"-"5.4mm")*2/3`

Calculator

LaTeX

Reset

👍

Download V Ring Packing Formulas PDF

Nominal packing cross section given Mean diameter of Conical spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3
w = (D_m-D_i)*2/3
This formula uses 3 Variables

Variables Used

Nominal Packing Cross-section of Bush Seal - (Measured in Meter) - The Nominal Packing Cross-section of Bush Seal is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.
Mean Diameter of Conical Spring - (Measured in Meter) - Mean diameter of conical spring a straight line passing from side to side through the centre of a spring.
Inside Diameter - (Measured in Meter) - Inside diameter is the diameter of the inside surface.

STEP 1: Convert Input(s) to Base Unit

Mean Diameter of Conical Spring: 21 Millimeter --> 0.021 Meter (Check conversion here)
Inside Diameter: 5.4 Millimeter --> 0.0054 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = (D_m-D_i)*2/3 --> (0.021-0.0054)*2/3

Evaluating ... ...

w = 0.0104

STEP 3: Convert Result to Output's Unit

0.0104 Meter -->10.4 Millimeter (Check conversion here)

FINAL ANSWER

10.4 Millimeter <-- Nominal Packing Cross-section of Bush Seal

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Packing » V Ring Packing » Single spring installations » Nominal packing cross section given Mean diameter of Conical spring

Credits

Created by sanjay shiva

national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh

sanjay shiva has created this Calculator and 100+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 12 Single spring installations Calculators

Actual Diameter of Spring Wire given Actual mean diameter of Conical spring

Go Diameter of spring wire = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Nominal Packing Cross-section of Bush Seal/2))

Outer Diameter of spring wire given Actual mean diameter of Conical spring

Go Outer diameter of spring wire = Actual mean diameter of spring-(1/2)*(Nominal Packing Cross-section of Bush Seal+Diameter of spring wire)

Nominal packing cross section given Actual mean diameter of Conical spring

Go Nominal Packing Cross-section of Bush Seal = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Diameter of spring wire/2))

Actual mean diameter of conical spring

Go Actual mean diameter of spring = Outer diameter of spring wire-(1/2)*(Nominal Packing Cross-section of Bush Seal+Diameter of spring wire)

Actual Mean Diameter of Conical Spring given Deflection of Spring

Go Actual mean diameter of spring = ((Deflection of Conical Spring*Diameter of spring wire)/0.0123)^1/2

Inside diameter of member given Mean diameter of Conical spring

Go Inside Diameter = Mean Diameter of Conical Spring-((3/2)*Nominal Packing Cross-section of Bush Seal)

Mean diameter of conical spring

Go Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal)

Nominal packing cross section given Mean diameter of Conical spring

Go Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3

Deflection of conical spring

Go Deflection of Conical Spring = .0123*((Actual mean diameter of spring)^2)/Diameter of spring wire

Actual Diameter of Spring Wire given Deflection of Spring

Go Diameter of spring wire = .0123*(Actual mean diameter of spring)^2/Deflection of Conical Spring

Diameter of wire for spring given Mean diameter of Conical spring

Go Diameter of spring wire = ((pi*(Mean Diameter of Conical Spring)^2)/139300)^1/3

Mean diameter of conical spring given Diameter of spring wire

Go Mean Diameter of Conical Spring = (((Diameter of spring wire)^3*139300)/pi)^1/2

Nominal packing cross section given Mean diameter of Conical spring Formula

Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3
w = (D_m-D_i)*2/3

What is Nominal packing cross section?

Nominal packing cross section is a surface or shape exposed by making a straight cut through something, especially at right angles to an axis.

How to Calculate Nominal packing cross section given Mean diameter of Conical spring?

Nominal packing cross section given Mean diameter of Conical spring calculator uses Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3 to calculate the Nominal Packing Cross-section of Bush Seal, The Nominal packing cross section given Mean diameter of Conical spring formula is defined as surface or shape exposed by making a straight cut through something, especially at right angles to an axis. Nominal Packing Cross-section of Bush Seal is denoted by w symbol.

How to calculate Nominal packing cross section given Mean diameter of Conical spring using this online calculator? To use this online calculator for Nominal packing cross section given Mean diameter of Conical spring, enter Mean Diameter of Conical Spring (D_m) & Inside Diameter (D_i) and hit the calculate button. Here is how the Nominal packing cross section given Mean diameter of Conical spring calculation can be explained with given input values -> 10400 = (0.021-0.0054)*2/3.

FAQ

What is Nominal packing cross section given Mean diameter of Conical spring?

The Nominal packing cross section given Mean diameter of Conical spring formula is defined as surface or shape exposed by making a straight cut through something, especially at right angles to an axis and is represented as w = (D_m-D_i)*2/3 or Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3. Mean diameter of conical spring a straight line passing from side to side through the centre of a spring & Inside diameter is the diameter of the inside surface.

How to calculate Nominal packing cross section given Mean diameter of Conical spring?

The Nominal packing cross section given Mean diameter of Conical spring formula is defined as surface or shape exposed by making a straight cut through something, especially at right angles to an axis is calculated using Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3. To calculate Nominal packing cross section given Mean diameter of Conical spring, you need Mean Diameter of Conical Spring (D_m) & Inside Diameter (D_i). With our tool, you need to enter the respective value for Mean Diameter of Conical Spring & Inside Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Nominal Packing Cross-section of Bush Seal?

In this formula, Nominal Packing Cross-section of Bush Seal uses Mean Diameter of Conical Spring & Inside Diameter. We can use 1 other way(s) to calculate the same, which is/are as follows -

Nominal Packing Cross-section of Bush Seal = 2*(Actual mean diameter of spring+Outer diameter of spring wire-(Diameter of spring wire/2))

Home

FREE PDFs

🔍 Search