Number of Passes when Compaction Production by Compaction Equipment is Given Calculator

Category	Engineering ↺
Engineering	Civil ↺
Civil	Soil and Earthwork ↺
Soil-And-Earthwork	Compaction Equipment ↺

✖Width of roller is the smaller dimension of the roller .ⓘ Width of roller [W]			+10% -10%
✖Roller speed is the speed by which roller is rolling over surface.ⓘ Roller speed [S]			+10% -10%
✖Efficiency factor is the relationship between the allowance time and the time taken.ⓘ Efficiency factor [E]			+10% -10%
✖Lift thickness governs aggregate size.ⓘ Lift thickness [L]			+10% -10%
✖Ratio of pay to loose in soil compactionⓘ Ratio of pay [F]			+10% -10%
✖Compaction production is the exertion of force on something so that it becomes more dense.ⓘ Compaction production [C]			+10% -10%

✖Number of passes required to obtain the required compaction depends on the lift thickness, contact pressure, and soil moisture content. ⓘ Number of Passes when Compaction Production by Compaction Equipment is Given [P]

⎘ Copy

👎 Report Issue!

👍 Share Now!

You are here:

Home »
Engineering »
Civil »
Soil and Earthwork »
Compaction Equipment »
Number of Passes when Compaction Production by Compaction Equipment is Given

Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 500+ more calculators!

Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 500+ more calculators!

< 9 Other formulas that you can solve using the same Inputs

Ratio of Pay to Loose when Compaction Production by Compaction Equipment is Given

Ratio of pay=(Compaction production *Number of passes)/(16*Width of roller*Roller speed*Lift thickness*Efficiency factor ) GO

Thickness of lift when Compaction Production by Compaction Equipment is Given

Lift thickness=(Compaction production *Number of passes)/(16*Width of roller*Roller speed*Efficiency factor *Roller speed) GO

Efficiency Factor when Compaction Production by Compaction Equipment is Given

Efficiency factor =(Compaction production *Number of passes)/(16*Width of roller*Roller speed*Lift thickness*Ratio of pay) GO

Width of Roller when Compaction Production by Compaction Equipment is Given

Width of roller=(Compaction production *Number of passes)/(16*Roller speed*Lift thickness*Ratio of pay*Efficiency factor ) GO

Speed of Roller when Compaction Production by Compaction Equipment is Given

Roller speed=(Compaction production *Number of passes)/(16*Width of roller*Lift thickness*Ratio of pay*Efficiency factor ) GO

Compaction Production by Compaction Equipment

Compaction production =(16*Width of roller*Roller speed*Lift thickness*Efficiency factor *Ratio of pay)/Number of passes GO

Compaction Production by Compaction Equipment when Efficiency Factor is Excellent

Compaction production =(16*Width of roller*Roller speed*Lift thickness*Ratio of pay*0.90)/Number of passes GO

Compaction Production by Compaction Equipment when Efficiency Factor is Average

Compaction production =(16*Width of roller*Roller speed*Lift thickness*Ratio of pay*0.80)/Number of passes GO

Compaction Production by Compaction Equipment when Efficiency Factor is Poor

Compaction production =(16*Width of roller*Roller speed*Lift thickness*Ratio of pay*0.75)/Number of passes GO

Number of Passes when Compaction Production by Compaction Equipment is Given Formula

Number of passes=(16*Width of roller*Roller speed*Efficiency factor *Lift thickness*Ratio of pay)/Compaction production
P=(16*W*S*E*L*F)/C

More formulas

Compaction Production by Compaction Equipment GO

Width of Roller when Compaction Production by Compaction Equipment is Given GO

Speed of Roller when Compaction Production by Compaction Equipment is Given GO

Thickness of lift when Compaction Production by Compaction Equipment is Given GO

Ratio of Pay to Loose when Compaction Production by Compaction Equipment is Given GO

Efficiency Factor when Compaction Production by Compaction Equipment is Given GO

Compaction Production by Compaction Equipment when Efficiency Factor is Excellent GO

Compaction Production by Compaction Equipment when Efficiency Factor is Average GO

Compaction Production by Compaction Equipment when Efficiency Factor is Poor GO

What is compaction ?

In geotechnical engineering, soil compaction is the process in which stress is applied to a soil causes densification as air is displaced from the pores between the soil grains.

How to Calculate Number of Passes when Compaction Production by Compaction Equipment is Given?

Number of Passes when Compaction Production by Compaction Equipment is Given calculator uses Number of passes=(16*Width of roller*Roller speed*Efficiency factor *Lift thickness*Ratio of pay)/Compaction production to calculate the Number of passes, The Number of Passes when Compaction Production by Compaction Equipment is Given calculates the number of passes when other parameters is known like roller characteristics . Number of passes and is denoted by P symbol.

How to calculate Number of Passes when Compaction Production by Compaction Equipment is Given using this online calculator? To use this online calculator for Number of Passes when Compaction Production by Compaction Equipment is Given, enter Width of roller (W), Roller speed (S), Efficiency factor (E), Lift thickness (L), Ratio of pay (F) and Compaction production (C) and hit the calculate button. Here is how the Number of Passes when Compaction Production by Compaction Equipment is Given calculation can be explained with given input values -> 86.4 = (16*3*0.833333333333333*0.5*0.002*3)/0.00138888888888889.

FAQ

What is Number of Passes when Compaction Production by Compaction Equipment is Given?

The Number of Passes when Compaction Production by Compaction Equipment is Given calculates the number of passes when other parameters is known like roller characteristics and is represented as P=(16*W*S*E*L*F)/C or Number of passes=(16*Width of roller*Roller speed*Efficiency factor *Lift thickness*Ratio of pay)/Compaction production . Width of roller is the smaller dimension of the roller , Roller speed is the speed by which roller is rolling over surface, Efficiency factor is the relationship between the allowance time and the time taken, Lift thickness governs aggregate size, Ratio of pay to loose in soil compaction and Compaction production is the exertion of force on something so that it becomes more dense.

How to calculate Number of Passes when Compaction Production by Compaction Equipment is Given?

The Number of Passes when Compaction Production by Compaction Equipment is Given calculates the number of passes when other parameters is known like roller characteristics is calculated using Number of passes=(16*Width of roller*Roller speed*Efficiency factor *Lift thickness*Ratio of pay)/Compaction production . To calculate Number of Passes when Compaction Production by Compaction Equipment is Given, you need Width of roller (W), Roller speed (S), Efficiency factor (E), Lift thickness (L), Ratio of pay (F) and Compaction production (C). With our tool, you need to enter the respective value for Width of roller, Roller speed, Efficiency factor , Lift thickness, Ratio of pay and Compaction production and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!