Old Cell Radius Solution

STEP 0: Pre-Calculation Summary
Formula Used
Old Cell Radius = New Cell Radius*2
rco = rcn*2
This formula uses 2 Variables
Variables Used
Old Cell Radius - (Measured in Meter) - Old Cell Radius typically refers to the coverage range or distance between the center of a cellular base station and the outer edge of its coverage area in a previous configuration.
New Cell Radius - (Measured in Meter) - New Cell Radius is half of the original radius. In this the cell boundaries need to be revised so that the local area can now contain number of smaller cell, these new cells are called microcells.
STEP 1: Convert Input(s) to Base Unit
New Cell Radius: 4.5 Kilometer --> 4500 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
rco = rcn*2 --> 4500*2
Evaluating ... ...
rco = 9000
STEP 3: Convert Result to Output's Unit
9000 Meter -->9 Kilometer (Check conversion here)
FINAL ANSWER
9 Kilometer <-- Old Cell Radius
(Calculation completed in 00.004 seconds)

Credits

Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

16 Cellular Concepts Calculators

Distance between Co-Channel Cells
Go Frequency Reuse Distance = (sqrt(3*Frequency Reuse Pattern))*Radius of Cell
Bandwidth of M-Ary PSK
Go M-Ary PSK Bandwidth = (2*Transmitting Frequency)/Number of Bits per Symbol
Maximum Calls per Hour per Cell
Go Maximum Calls Per Hour Per Cell = (Offered Load*60)/Average Calling Time
Average Calling Time
Go Average Calling Time = (Offered Load*60)/Maximum Calls Per Hour Per Cell
Offered Load
Go Offered Load = (Maximum Calls Per Hour Per Cell*Average Calling Time)/60
Frequency Reuse Distance
Go Frequency Reuse Distance = Co Channel Reuse Ratio*Radius of Cell
Co-Channel Interference
Go Co Channel Reuse Ratio = Frequency Reuse Distance/Radius of Cell
Cell Radius
Go Radius of Cell = Frequency Reuse Distance/Co Channel Reuse Ratio
Bandwidth Efficiency
Go Bandwidth Efficiency = Data Rate/Bandwidth
Hamming Distance
Go Hamming Distance = 2*Capability of Error Correction Bits+1
New Traffic Load
Go New Traffic Load = 4*Old Traffic Load
Traffic Load
Go Old Traffic Load = New Traffic Load/4
New Cell Radius
Go New Cell Radius = Old Cell Radius/2
Old Cell Radius
Go Old Cell Radius = New Cell Radius*2
New Cell Area
Go New Cell Area = Old Cell Area/4
Old Cell Area
Go Old Cell Area = New Cell Area*4

Old Cell Radius Formula

Old Cell Radius = New Cell Radius*2
rco = rcn*2

What is cell splitting?

Cell splitting is the process of subdividing a congested cell into smaller cells, each with its own base station and a corresponding reduction in antenna height and transmitter power. Cell splitting increases the capacity of a cellular system since it increases the number of times that channels are reused.

How to Calculate Old Cell Radius?

Old Cell Radius calculator uses Old Cell Radius = New Cell Radius*2 to calculate the Old Cell Radius, The Old Cell Radius formula is defined as cells that may vary in radius from 1 to 30 kilometres (0.62 to 18.64 mi). The boundaries of the cells can also overlap between adjacent cells and large cells can be divided into smaller cells. The frequency reuse factor is the rate at which the same frequency can be used in the network. Old Cell Radius is denoted by rco symbol.

How to calculate Old Cell Radius using this online calculator? To use this online calculator for Old Cell Radius, enter New Cell Radius (rcn) and hit the calculate button. Here is how the Old Cell Radius calculation can be explained with given input values -> 0.009 = 4500*2.

FAQ

What is Old Cell Radius?
The Old Cell Radius formula is defined as cells that may vary in radius from 1 to 30 kilometres (0.62 to 18.64 mi). The boundaries of the cells can also overlap between adjacent cells and large cells can be divided into smaller cells. The frequency reuse factor is the rate at which the same frequency can be used in the network and is represented as rco = rcn*2 or Old Cell Radius = New Cell Radius*2. New Cell Radius is half of the original radius. In this the cell boundaries need to be revised so that the local area can now contain number of smaller cell, these new cells are called microcells.
How to calculate Old Cell Radius?
The Old Cell Radius formula is defined as cells that may vary in radius from 1 to 30 kilometres (0.62 to 18.64 mi). The boundaries of the cells can also overlap between adjacent cells and large cells can be divided into smaller cells. The frequency reuse factor is the rate at which the same frequency can be used in the network is calculated using Old Cell Radius = New Cell Radius*2. To calculate Old Cell Radius, you need New Cell Radius (rcn). With our tool, you need to enter the respective value for New Cell Radius and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!