Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye Solution

STEP 0: Pre-Calculation Summary
Formula Used
Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
do = d+L/(b*τeye)
This formula uses 5 Variables
Variables Used
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Shear Stress in Eye of Knuckle Joint - (Measured in Pascal) - Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.
STEP 1: Convert Input(s) to Base Unit
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 40 Millimeter --> 0.04 Meter (Check conversion here)
Shear Stress in Eye of Knuckle Joint: 24 Newton per Square Millimeter --> 24000000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
do = d+L/(b*τeye) --> 0.037+50000/(0.04*24000000)
Evaluating ... ...
do = 0.0890833333333333
STEP 3: Convert Result to Output's Unit
0.0890833333333333 Meter -->89.0833333333333 Millimeter (Check conversion here)
FINAL ANSWER
89.0833333333333 89.08333 Millimeter <-- Outer Diameter of Eye of Knuckle Joint
(Calculation completed in 00.035 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

11 Fork Calculators

Thickness of Fork Eye of Knuckle Joint given Bending Stress in Pin
Go Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)
Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork
Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork
Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye
Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye
Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
Thickness of Fork Eye of Knuckle Joint given Bending Moment in Pin
Go Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)
Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)
Thickness of Fork Eye of Knuckle Joint given Rod Diameter
Go Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of Rod of Knuckle Joint
Outer Diameter of Eye of Knuckle Joint given Diameter of Pin
Go Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye Formula

Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
do = d+L/(b*τeye)

What is a knuckle joint?

A knuckle joint is a type of pin joint used to join two components that are loaded in tension. One component has a fork with a hole passing through both sides, forming a double eye, while the other component has a single eye.
The single eye is inserted between the double eyes so that all three holes are concentric and a pin is used to secure the components.
Knuckle joints are often used to connect rods subjected to tension in structures such as roof tiles, bridges, and cranes. The links of a chain are also considered a series of knuckle joints.

How to Calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye?

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye calculator uses Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint) to calculate the Outer Diameter of Eye of Knuckle Joint, The Outer diameter of eye of knuckle joint given shear stress in eye is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted. Outer Diameter of Eye of Knuckle Joint is denoted by do symbol.

How to calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye using this online calculator? To use this online calculator for Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye, enter Diameter of Knuckle Pin (d), Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Shear Stress in Eye of Knuckle Joint eye) and hit the calculate button. Here is how the Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye calculation can be explained with given input values -> 89083.33 = 0.037+50000/(0.04*24000000).

FAQ

What is Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye?
The Outer diameter of eye of knuckle joint given shear stress in eye is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted and is represented as do = d+L/(b*τeye) or Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint). Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint, Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius & Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.
How to calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye?
The Outer diameter of eye of knuckle joint given shear stress in eye is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted is calculated using Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint). To calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye, you need Diameter of Knuckle Pin (d), Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Shear Stress in Eye of Knuckle Joint eye). With our tool, you need to enter the respective value for Diameter of Knuckle Pin, Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Shear Stress in Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Outer Diameter of Eye of Knuckle Joint?
In this formula, Outer Diameter of Eye of Knuckle Joint uses Diameter of Knuckle Pin, Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Shear Stress in Eye of Knuckle Joint. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
  • Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin
  • Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
  • Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!