Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure.ⓘ Tensile Stress in Fork of Knuckle Joint [σ_tfork]			+10% -10%
✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Fork Eye of Knuckle Joint [a]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.ⓘ Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork [d_o]

⎘ Copy

👎

Formula

✖

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork

Formula

`"d"_{"o"} = "L"/(2*("σ"_{"t"}"fork")*"a")+"d"`

Example

`"73.28447mm"="50000N"/(2*"26.5N/mm²"*"26mm")+"37mm"`

Calculator

LaTeX

Reset

👍

Download Design of Knuckle Joint Formulas PDF

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork Solution

STEP 0: Pre-Calculation Summary

Formula Used

Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
d_o = L/(2*σ_tfork*a)+d
This formula uses 5 Variables

Variables Used

Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Tensile Stress in Fork of Knuckle Joint - (Measured in Pascal) - Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Tensile Stress in Fork of Knuckle Joint: 26.5 Newton per Square Millimeter --> 26500000 Pascal (Check conversion here)
Thickess of Fork Eye of Knuckle Joint: 26 Millimeter --> 0.026 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_o = L/(2*σ_tfork*a)+d --> 50000/(2*26500000*0.026)+0.037

Evaluating ... ...

d_o = 0.0732844702467344

STEP 3: Convert Result to Output's Unit

0.0732844702467344 Meter -->73.2844702467344 Millimeter (Check conversion here)

FINAL ANSWER

73.2844702467344 ≈ 73.28447 Millimeter <-- Outer Diameter of Eye of Knuckle Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Fork » Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 11 Fork Calculators

Thickness of Fork Eye of Knuckle Joint given Bending Stress in Pin

Go Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)

Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork

Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork

Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork

Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork

Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye

Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye

Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)

Thickness of Fork Eye of Knuckle Joint given Bending Moment in Pin

Go Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)

Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End

Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)

Thickness of Fork Eye of Knuckle Joint given Rod Diameter

Go Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of Rod of Knuckle Joint

Outer Diameter of Eye of Knuckle Joint given Diameter of Pin

Go Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork Formula

Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
d_o = L/(2*σ_tfork*a)+d

Shear failure in beams

Shear failure occurs when the beam has shear resistance lower than flexural strength and the shear force exceeds the shear capacity of different materials of the beam. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force.
This type of failure is sudden and provides no warning i.e. brittle failure. The effective span to depth ratio of the beams and their size are important parameters in determining the type of shear failure. Shear failure is an undesired type of failure and commonly stirrups are placed in the beam to prevent the shear failure.

How to Calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork?

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork calculator uses Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin to calculate the Outer Diameter of Eye of Knuckle Joint, The Outer diameter of eye of knuckle joint given tensile stress in fork is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted. Outer Diameter of Eye of Knuckle Joint is denoted by d_o symbol.

How to calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork using this online calculator? To use this online calculator for Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork, enter Load on Knuckle Joint (L), Tensile Stress in Fork of Knuckle Joint (σ_tfork), Thickess of Fork Eye of Knuckle Joint (a) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork calculation can be explained with given input values -> 73284.47 = 50000/(2*26500000*0.026)+0.037.

FAQ

What is Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork?

The Outer diameter of eye of knuckle joint given tensile stress in fork is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted and is represented as d_o = L/(2*σ_tfork*a)+d or Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin. Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure, Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork?

The Outer diameter of eye of knuckle joint given tensile stress in fork is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted is calculated using Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin. To calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork, you need Load on Knuckle Joint (L), Tensile Stress in Fork of Knuckle Joint (σ_tfork), Thickess of Fork Eye of Knuckle Joint (a) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Tensile Stress in Fork of Knuckle Joint, Thickess of Fork Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Outer Diameter of Eye of Knuckle Joint?

In this formula, Outer Diameter of Eye of Knuckle Joint uses Load on Knuckle Joint, Tensile Stress in Fork of Knuckle Joint, Thickess of Fork Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 4 other way(s) to calculate the same, which is/are as follows -

Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin

Home

FREE PDFs

🔍 Search