Overpressure given Sound Pressure Level in Decibels Calculator

Overpressure - (Measured in Pascal) - Overpressure for a charge exploded on the ground surface.
Sound Pressure Level - (Measured in Decibel) - Sound Pressure Level is the pressure level of a sound, measured in decibels.

STEP 1: Convert Input(s) to Base Unit

Sound Pressure Level: 25 Decibel --> 25 Decibel No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = (dB)^(1/0.084)*(6.95*10^(-28)) --> (25)^(1/0.084)*(6.95*10^(-28))

Evaluating ... ...

P = 3.04879178090486E-11

STEP 3: Convert Result to Output's Unit

3.04879178090486E-11 Pascal -->3.04879178090486E-14 Kilopascal (Check conversion here)

FINAL ANSWER

3.04879178090486E-14 ≈ 3E-14 Kilopascal <-- Overpressure

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Vibration Control in Blasting » Parameters of Vibration Control in Blasting » Overpressure given Sound Pressure Level in Decibels

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 17 Parameters of Vibration Control in Blasting Calculators

Burden Suggested in Langefors' Formula

Go Burden in Langefors' Formula = (Diameter of Drill Bit/33)*sqrt((Degree of Packing*Weight Strength of Explosive)/(Rock Constant*Degree of Fraction*Ratio of Spacing to Burden))

Frequency of Vibration given Acceleration of Particles

Go Frequency of Vibration = sqrt(Acceleration of Particles/(4*(pi)^2*Amplitude of Vibration))

Burden Suggested in Konya Formula

Go Burden = (3.15*Diameter of Explosive)*(Specific Gravity of Explosive/Specific Gravity of Rock)^(1/3)

Amplitude of Vibrations given Acceleration of Particles

Go Amplitude of Vibration = (Acceleration of Particles/(4*(pi*Frequency of Vibration)^2))

Distance from Explosion to Exposure given Overpressure

Go Distance from Explosion to Exposure = ((226.62/Overpressure))^(1/1.407)*(Maximum Weight of Explosives per Delay)^(1/3)

Overpressure due to Charge Exploded on Ground Surface

Go Overpressure = 226.62*((Maximum Weight of Explosives per Delay)^(1/3)/Distance from Explosion to Exposure)^(1.407)

Amplitude of Vibrations using Velocity of Particle

Go Amplitude of Vibration = (Velocity of Particle/(2*pi*Frequency of Vibration))

Frequency of Vibration given Velocity of Particle

Go Frequency of Vibration = (Velocity of Particle/(2*pi*Amplitude of Vibration))

Frequency of Vibrations caused by Blasting

Go Frequency of Vibration = (Velocity of Vibration/Wavelength of Vibration)

Burden given Stemming at Top of Borehole

Go Burden = (Stemming at Top of Borehole-(Overburden/2))/0.7

Diameter of Borehole using Burden

Go Diameter of Borehole = (Burden)^2/Length of Borehole

Length of Borehole using Burden

Go Length of Borehole = (Burden)^2/Diameter of Borehole

Length of Borehole given Spacing for Multiple Simultaneous Blasting

Go Length of Borehole = (Blasting Space)^2/Burden

Burden given Spacing for Multiple Simultaneous Blasting

Go Burden = (Blasting Space)^2/Length of Borehole

Overpressure given Sound Pressure Level in Decibels

Go Overpressure = (Sound Pressure Level)^(1/0.084)*(6.95*10^(-28))

Minimum Length of Borehole in Meter

Go Length of Borehole = (2*25.4*Diameter of Bore Pith Circle)

Minimum Length of Borehole in Feet

Go Length of Borehole = (2*Diameter of Borehole)

Overpressure given Sound Pressure Level in Decibels Formula

Overpressure = (Sound Pressure Level)^(1/0.084)*(6.95*10^(-28))
P = (dB)^(1/0.084)*(6.95*10^(-28))

What is Overpressure?

Overpressure (or blast overpressure) is the pressure caused by a shock wave over and above normal atmospheric pressure. The shock wave may be caused by sonic boom or by explosion, and the resulting overpressure receives particular attention when measuring the effects of nuclear weapons or thermobaric bombs.

How to Calculate Overpressure given Sound Pressure Level in Decibels?

Overpressure given Sound Pressure Level in Decibels calculator uses Overpressure = (Sound Pressure Level)^(1/0.084)*(6.95*10^(-28)) to calculate the Overpressure, The Overpressure given Sound Pressure Level in Decibels is defined as the pressure caused by a shock wave over and above normal atmospheric pressure. Overpressure is denoted by P symbol.

How to calculate Overpressure given Sound Pressure Level in Decibels using this online calculator? To use this online calculator for Overpressure given Sound Pressure Level in Decibels, enter Sound Pressure Level (dB) and hit the calculate button. Here is how the Overpressure given Sound Pressure Level in Decibels calculation can be explained with given input values -> 3E-17 = (25)^(1/0.084)*(6.95*10^(-28)).

FAQ

What is Overpressure given Sound Pressure Level in Decibels?

The Overpressure given Sound Pressure Level in Decibels is defined as the pressure caused by a shock wave over and above normal atmospheric pressure and is represented as P = (dB)^(1/0.084)*(6.95*10^(-28)) or Overpressure = (Sound Pressure Level)^(1/0.084)*(6.95*10^(-28)). Sound Pressure Level is the pressure level of a sound, measured in decibels.

How to calculate Overpressure given Sound Pressure Level in Decibels?

The Overpressure given Sound Pressure Level in Decibels is defined as the pressure caused by a shock wave over and above normal atmospheric pressure is calculated using Overpressure = (Sound Pressure Level)^(1/0.084)*(6.95*10^(-28)). To calculate Overpressure given Sound Pressure Level in Decibels, you need Sound Pressure Level (dB). With our tool, you need to enter the respective value for Sound Pressure Level and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Overpressure?

In this formula, Overpressure uses Sound Pressure Level. We can use 1 other way(s) to calculate the same, which is/are as follows -

Overpressure = 226.62*((Maximum Weight of Explosives per Delay)^(1/3)/Distance from Explosion to Exposure)^(1.407)

Home

FREE PDFs

🔍 Search