Percolation Intensity Coefficient given Discharge Calculator

✖Discharge is the rate of flow of a liquid.ⓘ Discharge [Q]			+10% -10%
✖Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross-Sectional Area [A_cs]			+10% -10%
✖Depression Head is the height of the bottom of a well above the datum.ⓘ Depression Head [H]			+10% -10%

✖Percolation intensity coefficient is the constant of the formation around the well.ⓘ Percolation Intensity Coefficient given Discharge [C]

⎘ Copy

👎

Formula

✖

Percolation Intensity Coefficient given Discharge

Formula

`"C" = "Q"/("A"_{"cs"}*"H")`

Example

`"0.011099m/s"="1.01m³/s"/("13m²"*"7m")`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Percolation Intensity Coefficient given Discharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Percolation intensity coefficient = Discharge/(Cross-Sectional Area*Depression Head)
C = Q/(A_cs*H)
This formula uses 4 Variables

Variables Used

Percolation intensity coefficient - (Measured in Meter per Second) - Percolation intensity coefficient is the constant of the formation around the well.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Cross-Sectional Area - (Measured in Square Meter) - Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Depression Head - (Measured in Meter) - Depression Head is the height of the bottom of a well above the datum.

STEP 1: Convert Input(s) to Base Unit

Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Cross-Sectional Area: 13 Square Meter --> 13 Square Meter No Conversion Required
Depression Head: 7 Meter --> 7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C = Q/(A_cs*H) --> 1.01/(13*7)

Evaluating ... ...

C = 0.0110989010989011

STEP 3: Convert Result to Output's Unit

0.0110989010989011 Meter per Second --> No Conversion Required

FINAL ANSWER

0.0110989010989011 ≈ 0.011099 Meter per Second <-- Percolation intensity coefficient

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources : Ground Water » Yield of an Open Well » Constant Level Pumping Test » Discharge from Well » Percolation Intensity Coefficient given Discharge

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 10+ Discharge from Well Calculators

Time in Hours given Specific Capacity of Open Well

Go Time = (1/Specific Capacity)*log((Depression Head 1/Depression Head 2),e)

Time in Hours given Specific Capacity of Open Well with Base 10

Go Time = (2.303/Specific Capacity)*log((Depression Head 1/Depression Head 2),10)

Percolation Intensity Coefficient given Discharge

Go Percolation intensity coefficient = Discharge/(Cross-Sectional Area*Depression Head)

Discharge from Open Well given Depression Head

Go Discharge = (Percolation intensity coefficient*Cross-Sectional Area*Depression Head)

Discharge from Well given Specific Capacity

Go Discharge = Specific Capacity*Cross-Sectional Area*Constant Depression Head

Discharge from Well given Specific Capacity for Clay Soil

Go Discharge = 0.25*Cross-Sectional Area*Constant Depression Head for Clay Soil

Discharge from Well given Specific Capacity for Coarse Sand

Go Discharge = 1*Cross-Sectional Area*Constant Depression Head for Coarse Sand

Discharge from Well given Specific Capacity for Fine Sand

Go Discharge = 0.5*Cross-Sectional Area*Constant Depression Head for Fine Soil

Discharge from Open Well given Mean Velocity of Water Percolating

Go Discharge = Cross-Sectional Area*Mean Velocity

Mean Velocity of Water Percolating into Well

Go Mean Velocity = Discharge/Cross-Sectional Area

Percolation Intensity Coefficient given Discharge Formula

Percolation intensity coefficient = Discharge/(Cross-Sectional Area*Depression Head)
C = Q/(A_cs*H)

What is percolation ?

Percolation is the process of a liquid slowly passing through a filter. It's how coffee is usually made. Percolation comes from the Latin word percolare, which means "to strain through."

How to Calculate Percolation Intensity Coefficient given Discharge?

Percolation Intensity Coefficient given Discharge calculator uses Percolation intensity coefficient = Discharge/(Cross-Sectional Area*Depression Head) to calculate the Percolation intensity coefficient, Percolation Intensity Coefficient given Discharge calculates value of percolation intensity coefficient when we have prior information of other parameters used. Percolation intensity coefficient is denoted by C symbol.

How to calculate Percolation Intensity Coefficient given Discharge using this online calculator? To use this online calculator for Percolation Intensity Coefficient given Discharge, enter Discharge (Q), Cross-Sectional Area (A_cs) & Depression Head (H) and hit the calculate button. Here is how the Percolation Intensity Coefficient given Discharge calculation can be explained with given input values -> 0.010989 = discharge/(13*7).

FAQ

What is Percolation Intensity Coefficient given Discharge?

Percolation Intensity Coefficient given Discharge calculates value of percolation intensity coefficient when we have prior information of other parameters used and is represented as C = Q/(A_cs*H) or Percolation intensity coefficient = Discharge/(Cross-Sectional Area*Depression Head). Discharge is the rate of flow of a liquid, Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point & Depression Head is the height of the bottom of a well above the datum.

How to calculate Percolation Intensity Coefficient given Discharge?

Percolation Intensity Coefficient given Discharge calculates value of percolation intensity coefficient when we have prior information of other parameters used is calculated using Percolation intensity coefficient = Discharge/(Cross-Sectional Area*Depression Head). To calculate Percolation Intensity Coefficient given Discharge, you need Discharge (Q), Cross-Sectional Area (A_cs) & Depression Head (H). With our tool, you need to enter the respective value for Discharge, Cross-Sectional Area & Depression Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search