Polarographic Analyte Concentration Solution

STEP 0: Pre-Calculation Summary
Formula Used
Concentration at given time = Maximum Diffusion Current/(708*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*(Drop Time^(1/6))*Moles of Analyte)
CA = imax/(708*(D^(1/2))*(m^(2/3))*(t^(1/6))*n)
This formula uses 6 Variables
Variables Used
Concentration at given time - Concentration at given time is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.
Maximum Diffusion Current - Maximum Diffusion Current is the maximum current that passes through a cell when the concentration of electro-active species at the electrode surface is zero.
Diffusion Constant - Diffusion Constant also known as the diffusion coefficient or diffusivity, is a physical constant that measures the rate of material transport.
Rate of Flow of Mercury - Rate of Flow of Mercury the volume of mercury that passes through a cross-section each second.
Drop Time - Drop Time is the time during when triangular impact pressure decreases from the highest to the lowest.
Moles of Analyte - Moles of Analyte the quantity of an analyte in a sample that can be expressed in terms of moles.
STEP 1: Convert Input(s) to Base Unit
Maximum Diffusion Current: 10 --> No Conversion Required
Diffusion Constant: 4 --> No Conversion Required
Rate of Flow of Mercury: 3 --> No Conversion Required
Drop Time: 20 --> No Conversion Required
Moles of Analyte: 3 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
CA = imax/(708*(D^(1/2))*(m^(2/3))*(t^(1/6))*n) --> 10/(708*(4^(1/2))*(3^(2/3))*(20^(1/6))*3)
Evaluating ... ...
CA = 0.000686904438839284
STEP 3: Convert Result to Output's Unit
0.000686904438839284 --> No Conversion Required
FINAL ANSWER
0.000686904438839284 0.000687 <-- Concentration at given time
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Torsha_Paul
University of Calcutta (CU), Kolkata
Torsha_Paul has created this Calculator and 200+ more calculators!
Verifier Image
Verified by Soupayan banerjee
National University of Judicial Science (NUJS), Kolkata
Soupayan banerjee has verified this Calculator and 900+ more calculators!

Potentiometry and Voltametry Calculators

Area of Electrode
​ LaTeX ​ Go Area of Electrode = (Cathodic Current/(2.69*(10^8)*Number of electrons given CI*Concentration given CI*(Diffusion Constant^0.5)*(Sweep Rate^0.5)))^(2/3)
Applied Potential
​ LaTeX ​ Go Applied Potential in Potentiometry = Cell Potential in Potentiometry+(Current in Potentiometry*Resistance in Potentiometry)
Anodic Potential
​ LaTeX ​ Go Anodic Potential = Cathodic Potential+(57/Moles of Electron)
Anodic Potential given half potential
​ LaTeX ​ Go Anodic Potential = (Half Potential/0.5)-Cathodic Potential

Polarographic Analyte Concentration Formula

​LaTeX ​Go
Concentration at given time = Maximum Diffusion Current/(708*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*(Drop Time^(1/6))*Moles of Analyte)
CA = imax/(708*(D^(1/2))*(m^(2/3))*(t^(1/6))*n)

What is the importance of polarography?

Polarography is an electrochemical voltammetric technique that employs (dropping or static) mercury drop as a working electrode. In its most simple form polarography can be used to determine concentrations of electroactive species in liquids by measuring their mass-transport limiting currents.

How to Calculate Polarographic Analyte Concentration?

Polarographic Analyte Concentration calculator uses Concentration at given time = Maximum Diffusion Current/(708*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*(Drop Time^(1/6))*Moles of Analyte) to calculate the Concentration at given time, The Polarographic Analyte Concentration formula is defined as the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume. Concentration at given time is denoted by CA symbol.

How to calculate Polarographic Analyte Concentration using this online calculator? To use this online calculator for Polarographic Analyte Concentration, enter Maximum Diffusion Current (imax), Diffusion Constant (D), Rate of Flow of Mercury (m), Drop Time (t) & Moles of Analyte (n) and hit the calculate button. Here is how the Polarographic Analyte Concentration calculation can be explained with given input values -> 0.000687 = 10/(708*(4^(1/2))*(3^(2/3))*(20^(1/6))*3).

FAQ

What is Polarographic Analyte Concentration?
The Polarographic Analyte Concentration formula is defined as the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume and is represented as CA = imax/(708*(D^(1/2))*(m^(2/3))*(t^(1/6))*n) or Concentration at given time = Maximum Diffusion Current/(708*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*(Drop Time^(1/6))*Moles of Analyte). Maximum Diffusion Current is the maximum current that passes through a cell when the concentration of electro-active species at the electrode surface is zero, Diffusion Constant also known as the diffusion coefficient or diffusivity, is a physical constant that measures the rate of material transport, Rate of Flow of Mercury the volume of mercury that passes through a cross-section each second, Drop Time is the time during when triangular impact pressure decreases from the highest to the lowest & Moles of Analyte the quantity of an analyte in a sample that can be expressed in terms of moles.
How to calculate Polarographic Analyte Concentration?
The Polarographic Analyte Concentration formula is defined as the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume is calculated using Concentration at given time = Maximum Diffusion Current/(708*(Diffusion Constant^(1/2))*(Rate of Flow of Mercury^(2/3))*(Drop Time^(1/6))*Moles of Analyte). To calculate Polarographic Analyte Concentration, you need Maximum Diffusion Current (imax), Diffusion Constant (D), Rate of Flow of Mercury (m), Drop Time (t) & Moles of Analyte (n). With our tool, you need to enter the respective value for Maximum Diffusion Current, Diffusion Constant, Rate of Flow of Mercury, Drop Time & Moles of Analyte and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Concentration at given time?
In this formula, Concentration at given time uses Maximum Diffusion Current, Diffusion Constant, Rate of Flow of Mercury, Drop Time & Moles of Analyte. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Concentration at given time = Potentiometric Current/Potentiometric Constant
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!