Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species Calculator

✖Fugacity of Liquid Phase Species is denoted by f^l symbol.ⓘ Fugacity of Liquid Phase Species [f^l]			+10% -10%
✖Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species.ⓘ Saturated Fugacity Coefficient of Species [ϕ^sat]			+10% -10%
✖Saturated pressure is the pressure at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given temperature.ⓘ Saturated Pressure [P^sat]			+10% -10%

✖Poynting Factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.ⓘ Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species [P.F.]

⎘ Copy

👎

Formula

✖

Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species

Formula

`"P.F." = "f"^{"l"}/("ϕ"^{"sat"}*"P"^{"sat"})`

Example

`"6.538462"="17Pa"/("0.13"*"20Pa")`

Calculator

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF

Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species Solution

STEP 0: Pre-Calculation Summary

Formula Used

Poynting Factor = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Saturated Pressure)
P.F. = f^l/(ϕ^sat*P^sat)
This formula uses 4 Variables

Variables Used

Poynting Factor - Poynting Factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.
Fugacity of Liquid Phase Species - (Measured in Pascal) - Fugacity of Liquid Phase Species is denoted by f^l symbol.
Saturated Fugacity Coefficient of Species - Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species.
Saturated Pressure - (Measured in Pascal) - Saturated pressure is the pressure at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given temperature.

STEP 1: Convert Input(s) to Base Unit

Fugacity of Liquid Phase Species: 17 Pascal --> 17 Pascal No Conversion Required
Saturated Fugacity Coefficient of Species: 0.13 --> No Conversion Required
Saturated Pressure: 20 Pascal --> 20 Pascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P.F. = f^l/(ϕ^sat*P^sat) --> 17/(0.13*20)

Evaluating ... ...

P.F. = 6.53846153846154

STEP 3: Convert Result to Output's Unit

6.53846153846154 --> No Conversion Required

FINAL ANSWER

6.53846153846154 ≈ 6.538462 <-- Poynting Factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Solution Thermodynamics » Fugacity and Fugacity Coefficient » Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Akshada Kulkarni

National Institute of Information Technology (NIIT), Neemrana

Akshada Kulkarni has verified this Calculator and 900+ more calculators!

< 7 Fugacity and Fugacity Coefficient Calculators

Saturated Fugacity Coeff. using Poynting Factor Correlation and Fugacity of Liq. Phase Species

Go Saturated Fugacity Coefficient of Species = Fugacity of Liquid Phase Species/(Saturated Pressure*exp((-Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature)))

Fugacity of Liq. Phase Species using Poynting Factor Correlation

Go Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*exp((Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))

Poynting Factor

Go Poynting Factor = exp((-Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))

Saturated Fugacity Coeff. using Poynting Factor and Fugacity of Liq. Phase Species

Go Saturated Fugacity Coefficient of Species = Fugacity of Liquid Phase Species/(Saturated Pressure*Poynting Factor)

Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species

Go Poynting Factor = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Saturated Pressure)

Saturated Pressure using Poynting Factor and Fugacity of Liq. Phase Species

Go Saturated Pressure = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Poynting Factor)

Fugacity of Liq. Phase Species using Poynting Factor

Go Fugacity of Liquid Phase Species = Saturated Fugacity Coefficient of Species*Saturated Pressure*Poynting Factor

Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species Formula

Poynting Factor = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Saturated Pressure)
P.F. = f^l/(ϕ^sat*P^sat)

What is Poynting Factor?

The Poynting effect generally refers to the change in the fugacity of a liquid when a non-condensable gas is mixed with the vapor at saturated conditions. At high pressure while remaining in the gaseous form is due to the Poynting effect. The Poynting factor can be stated as the change in fugacity as the pressure goes from the saturated pressure to pressure at a constant temperature.

What is Duhem’s Theorem?

For any closed system formed from known amounts of prescribed chemical species, the equilibrium state is completely determined when any two independent variables are fixed. The two independent variables subject to specification may in general be either intensive or extensive. However, the number of independent intensive variables is given by the phase rule. Thus when F = 1, at least one of the two variables must be extensive, and when F = 0, both must be extensive.

How to Calculate Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species?

Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species calculator uses Poynting Factor = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Saturated Pressure) to calculate the Poynting Factor, The Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species formula is defined as the ratio of the fugacity of the liquid phase of a species to the product of saturated fugacity coefficient of a species and saturated pressure. Poynting Factor is denoted by P.F. symbol.

How to calculate Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species using this online calculator? To use this online calculator for Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species, enter Fugacity of Liquid Phase Species (f^l), Saturated Fugacity Coefficient of Species (ϕ^sat) & Saturated Pressure (P^sat) and hit the calculate button. Here is how the Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species calculation can be explained with given input values -> 6.538462 = 17/(0.13*20).

FAQ

What is Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species?

The Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species formula is defined as the ratio of the fugacity of the liquid phase of a species to the product of saturated fugacity coefficient of a species and saturated pressure and is represented as P.F. = f^l/(ϕ^sat*P^sat) or Poynting Factor = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Saturated Pressure). Fugacity of Liquid Phase Species is denoted by f^l symbol, Saturated Fugacity Coefficient of Species is the ratio of the saturated fugacity of a species to the saturated pressure of a species & Saturated pressure is the pressure at which a given liquid and its vapour or a given solid and its vapour can co-exist in equilibrium, at a given temperature.

How to calculate Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species?

The Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species formula is defined as the ratio of the fugacity of the liquid phase of a species to the product of saturated fugacity coefficient of a species and saturated pressure is calculated using Poynting Factor = Fugacity of Liquid Phase Species/(Saturated Fugacity Coefficient of Species*Saturated Pressure). To calculate Poynting Factor using Saturated Fugacity Coeff. and Fugacity of Liq. Phase Species, you need Fugacity of Liquid Phase Species (f^l), Saturated Fugacity Coefficient of Species (ϕ^sat) & Saturated Pressure (P^sat). With our tool, you need to enter the respective value for Fugacity of Liquid Phase Species, Saturated Fugacity Coefficient of Species & Saturated Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Poynting Factor?

In this formula, Poynting Factor uses Fugacity of Liquid Phase Species, Saturated Fugacity Coefficient of Species & Saturated Pressure. We can use 1 other way(s) to calculate the same, which is/are as follows -

Poynting Factor = exp((-Volume of Liquid Phase*(Pressure-Saturated Pressure))/([R]*Temperature))

Home

FREE PDFs

🔍 Search