Pulses of Time Interval from Rainfall Hyetograph Calculator

✖Duration is used to measure the response time of any event.ⓘ Duration [D]			+10% -10%
✖Time Interval is the amount of time required for the change from initial to the final state.ⓘ Time Interval [Δt]			+10% -10%

✖Pulses of Time Interval Observed in Rainfall Hyetograph.ⓘ Pulses of Time Interval from Rainfall Hyetograph [N]

⎘ Copy

👎

Formula

✖

Pulses of Time Interval from Rainfall Hyetograph

Formula

`"N" = "D"/"Δt"`

Example

`"7"="21h"/"3h"`

Calculator

LaTeX

Reset

👍

Download Abstractions from Precipitation Formulas PDF

Pulses of Time Interval from Rainfall Hyetograph Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pulses of Time Interval = Duration/Time Interval
N = D/Δt
This formula uses 3 Variables

Variables Used

Pulses of Time Interval - Pulses of Time Interval Observed in Rainfall Hyetograph.
Duration - (Measured in Hour) - Duration is used to measure the response time of any event.
Time Interval - (Measured in Hour) - Time Interval is the amount of time required for the change from initial to the final state.

STEP 1: Convert Input(s) to Base Unit

Duration: 21 Hour --> 21 Hour No Conversion Required
Time Interval: 3 Hour --> 3 Hour No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N = D/Δt --> 21/3

Evaluating ... ...

N = 7

STEP 3: Convert Result to Output's Unit

7 --> No Conversion Required

FINAL ANSWER

7 <-- Pulses of Time Interval

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Abstractions from Precipitation » Infiltration Indices » Φ-Index » Pulses of Time Interval from Rainfall Hyetograph

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< 11 Φ-Index Calculators

Precipitation given Total Runoff Depth for Practical Use

Go Total Storm Precipitation = Total Direct Runoff+(Φ-Index*Duration of Rainfall Excess)

Duration of Rainfall Excess given Total Runoff Depth

Go Duration of Rainfall Excess = (Total Storm Precipitation-Total Direct Runoff)/Φ-Index

Phi Index given Total Runoff Depth

Go Φ-Index = (Total Storm Precipitation-Total Direct Runoff)/Duration of Rainfall Excess

Total Direct Runoff Depth

Go Total Direct Runoff = Total Storm Precipitation-(Φ-Index*Duration of Rainfall Excess)

Runoff to Determine Phi Index for Practical Use

Go Runoff in Cm from 24h Rainfall = Coefficient Depending on Soil Type*Intensity of Rainfall^1.2

Rainfall Intensity for Phi Index of Practical Use

Go Intensity of Rainfall = (Φ-Index*24)+Runoff in Cm from 24h Rainfall

Runoff for Phi Index for Practical Use

Go Runoff in Cm from 24h Rainfall = Intensity of Rainfall-(Φ-Index*24)

Phi Index for Practical Use

Go Φ-Index = (Intensity of Rainfall-Runoff in Cm from 24h Rainfall)/24

Pulses of Time Interval from Rainfall Hyetograph

Go Pulses of Time Interval = Duration/Time Interval

Duration of Rainfall from Rainfall Hyetograph

Go Duration = Pulses of Time Interval*Time Interval

Time Interval of Rainfall Hyetograph

Go Time Interval = Duration/Pulses of Time Interval

Pulses of Time Interval from Rainfall Hyetograph Formula

Pulses of Time Interval = Duration/Time Interval
N = D/Δt

What is Rainfall Hyetograph?

A Hyetograph is a graphical representation of the distribution of rainfall intensity over time. For instance, in the 24-hour rainfall distributions as developed by the Soil Conservation Service, rainfall intensity progressively increases until it reaches a maximum and then gradually decreases

How to Calculate Pulses of Time Interval from Rainfall Hyetograph?

Pulses of Time Interval from Rainfall Hyetograph calculator uses Pulses of Time Interval = Duration/Time Interval to calculate the Pulses of Time Interval, The Pulses of Time Interval from Rainfall Hyetograph formula is defined as the time between consecutive pulses both measured at the same point in the pulse. Pulses of Time Interval is denoted by N symbol.

How to calculate Pulses of Time Interval from Rainfall Hyetograph using this online calculator? To use this online calculator for Pulses of Time Interval from Rainfall Hyetograph, enter Duration (D) & Time Interval (Δt) and hit the calculate button. Here is how the Pulses of Time Interval from Rainfall Hyetograph calculation can be explained with given input values -> 7 = 75600/10800.

FAQ

What is Pulses of Time Interval from Rainfall Hyetograph?

The Pulses of Time Interval from Rainfall Hyetograph formula is defined as the time between consecutive pulses both measured at the same point in the pulse and is represented as N = D/Δt or Pulses of Time Interval = Duration/Time Interval. Duration is used to measure the response time of any event & Time Interval is the amount of time required for the change from initial to the final state.

How to calculate Pulses of Time Interval from Rainfall Hyetograph?

The Pulses of Time Interval from Rainfall Hyetograph formula is defined as the time between consecutive pulses both measured at the same point in the pulse is calculated using Pulses of Time Interval = Duration/Time Interval. To calculate Pulses of Time Interval from Rainfall Hyetograph, you need Duration (D) & Time Interval (Δt). With our tool, you need to enter the respective value for Duration & Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search