Pressure to Current Conversion Calculator

Search
Home	Engineering ↺
Engineering	Electronics and Instrumentation ↺
Electronics and Instrumentation	Measuring Instrument Circuits ↺
Measuring Instrument Circuits	Process Instrumentation Control ↺

✖The Value 1 is the value of the variable that is being converted from one dimension to another.ⓘ Value 1 [V₁]			+10% -10%
✖The Lower range value 1 is the starting point of the dimension 1 in the conversion factor.ⓘ Lower range value 1 [LRV1]			+10% -10%
✖The Upper range value 2 is the highest value of the dimension the value is being converted to.ⓘ Upper range value 2 [URV2]			+10% -10%
✖The Lower range value 2 is the dimension of the variables the value is being converted to.ⓘ Lower range value 2 [LRV2]			+10% -10%
✖The Upper range value 1 is the highest value of the dimension 1 in the conversion formula.ⓘ Upper range value 1 [URV1]			+10% -10%

✖The Value 2 is the value of the obtained converted value from dimension 1 to dimension 2.ⓘ Pressure to Current Conversion [V₂]

⎘ Copy

👎

Formula

✖

Pressure to Current Conversion

Formula

`"V"_{"2"} = ((("V"_{"1"}-"LRV1")*("URV2"-"LRV2"))/("URV1"-"LRV1"))+"LRV2" `

Example

`"7.987988mA"=((("25kgf/cm²"-"0.1kgf/cm²")*("20mA"-"4mA"))/("100kgf/cm²"-"0.1kgf/cm²"))+"4mA" `

Calculator

LaTeX

Reset

👍

Pressure to Current Conversion Solution

STEP 0: Pre-Calculation Summary

Formula Used

Value 2 = (((Value 1-Lower range value 1)*(Upper range value 2-Lower range value 2))/(Upper range value 1-Lower range value 1))+Lower range value 2
V₂ = (((V₁-LRV1)*(URV2-LRV2))/(URV1-LRV1))+LRV2
This formula uses 6 Variables

Variables Used

Value 2 - (Measured in Ampere) - The Value 2 is the value of the obtained converted value from dimension 1 to dimension 2.
Value 1 - (Measured in Pascal) - The Value 1 is the value of the variable that is being converted from one dimension to another.
Lower range value 1 - (Measured in Pascal) - The Lower range value 1 is the starting point of the dimension 1 in the conversion factor.
Upper range value 2 - (Measured in Ampere) - The Upper range value 2 is the highest value of the dimension the value is being converted to.
Lower range value 2 - (Measured in Ampere) - The Lower range value 2 is the dimension of the variables the value is being converted to.
Upper range value 1 - (Measured in Pascal) - The Upper range value 1 is the highest value of the dimension 1 in the conversion formula.

STEP 1: Convert Input(s) to Base Unit

Value 1: 25 Kilogram-Force per Square Centimeter --> 2451662.49999983 Pascal (Check conversion here)
Lower range value 1: 0.1 Kilogram-Force per Square Centimeter --> 9806.64999999931 Pascal (Check conversion here)
Upper range value 2: 20 Milliampere --> 0.02 Ampere (Check conversion here)
Lower range value 2: 4 Milliampere --> 0.004 Ampere (Check conversion here)
Upper range value 1: 100 Kilogram-Force per Square Centimeter --> 9806649.99999931 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V₂ = (((V₁-LRV1)*(URV2-LRV2))/(URV1-LRV1))+LRV2 --> (((2451662.49999983-9806.64999999931)*(0.02-0.004))/(9806649.99999931-9806.64999999931))+0.004

Evaluating ... ...

V₂ = 0.00798798798798799

STEP 3: Convert Result to Output's Unit

0.00798798798798799 Ampere -->7.98798798798799 Milliampere (Check conversion here)

FINAL ANSWER

7.98798798798799 Milliampere <-- Value 2

(Calculation completed in 00.015 seconds)

You are here -

Home » Engineering » Electronics and Instrumentation » Measuring Instrument Circuits » Process Instrumentation Control » Pressure to Current Conversion

Credits

Created by Rachita C

BMS College Of Engineering (BMSCE), Banglore

Rachita C has created this Calculator and 25+ more calculators!

Verified by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has verified this Calculator and 300+ more calculators!

< 1 Process Instrumentation Control Calculators

Pressure to Current Conversion

Go Value 2 = (((Value 1-Lower range value 1)*(Upper range value 2-Lower range value 2))/(Upper range value 1-Lower range value 1))+Lower range value 2

Pressure to Current Conversion Formula

Value 2 = (((Value 1-Lower range value 1)*(Upper range value 2-Lower range value 2))/(Upper range value 1-Lower range value 1))+Lower range value 2
V₂ = (((V₁-LRV1)*(URV2-LRV2))/(URV1-LRV1))+LRV2

How do you measure 4 to 20 milliamps?

The measurement of 4 to 20 mA is performed by inserting a load resistance into a power supply line, thereby converting the load resistance to voltage. Satisfy the relationship of “maximum load resistance of the 4 to 20 mA output > load resistance (shunt resistor).”

How to Calculate Pressure to Current Conversion?

Pressure to Current Conversion calculator uses Value 2 = (((Value 1-Lower range value 1)*(Upper range value 2-Lower range value 2))/(Upper range value 1-Lower range value 1))+Lower range value 2 to calculate the Value 2, Pressure to Current Conversion formula is used for converting the range from Range conversion from 0 to 100 kg per cm² to 4 to 20 mA. This is mainly used in flow measurement systems and many other process control systems. P.S:- the default value of LRV1 is 0.1 because the system does not accept 0. Value 2 is denoted by V₂ symbol.

How to calculate Pressure to Current Conversion using this online calculator? To use this online calculator for Pressure to Current Conversion, enter Value 1 (V₁), Lower range value 1 (LRV1), Upper range value 2 (URV2), Lower range value 2 (LRV2) & Upper range value 1 (URV1) and hit the calculate button. Here is how the Pressure to Current Conversion calculation can be explained with given input values -> 7.987988 = (((2451662.49999983-9806.64999999931)*(0.02-0.004))/(9806649.99999931-9806.64999999931))+0.004 .

FAQ

What is Pressure to Current Conversion?

Pressure to Current Conversion formula is used for converting the range from Range conversion from 0 to 100 kg per cm² to 4 to 20 mA. This is mainly used in flow measurement systems and many other process control systems. P.S:- the default value of LRV1 is 0.1 because the system does not accept 0 and is represented as V₂ = (((V₁-LRV1)*(URV2-LRV2))/(URV1-LRV1))+LRV2 or Value 2 = (((Value 1-Lower range value 1)*(Upper range value 2-Lower range value 2))/(Upper range value 1-Lower range value 1))+Lower range value 2 . The Value 1 is the value of the variable that is being converted from one dimension to another, The Lower range value 1 is the starting point of the dimension 1 in the conversion factor, The Upper range value 2 is the highest value of the dimension the value is being converted to, The Lower range value 2 is the dimension of the variables the value is being converted to & The Upper range value 1 is the highest value of the dimension 1 in the conversion formula.

How to calculate Pressure to Current Conversion?

Pressure to Current Conversion formula is used for converting the range from Range conversion from 0 to 100 kg per cm² to 4 to 20 mA. This is mainly used in flow measurement systems and many other process control systems. P.S:- the default value of LRV1 is 0.1 because the system does not accept 0 is calculated using Value 2 = (((Value 1-Lower range value 1)*(Upper range value 2-Lower range value 2))/(Upper range value 1-Lower range value 1))+Lower range value 2 . To calculate Pressure to Current Conversion, you need Value 1 (V₁), Lower range value 1 (LRV1), Upper range value 2 (URV2), Lower range value 2 (LRV2) & Upper range value 1 (URV1). With our tool, you need to enter the respective value for Value 1, Lower range value 1, Upper range value 2, Lower range value 2 & Upper range value 1 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!