Sewage Inflow Per Day given Total Solids Removed Calculator

✖Mass of solids leaving the system is calculated in terms of mass per day.ⓘ Mass of solids leaving the system [M^']			+10% -10%
✖Volume of wasted sludge per day is measured in terms of discharge.ⓘ Volume of Wasted Sludge per day [Q_w]			+10% -10%
✖Concentration of solids in the returned sludge or in the wasted sludge.ⓘ Concentration of solids [X^R]			+10% -10%
✖Concentration of solids in the effluent is in the terms of density.ⓘ Concentration of solids in the effluent [X^E]			+10% -10%

✖Sewage discharge is the flow rate of sewage when it is being discharged in the river.ⓘ Sewage Inflow Per Day given Total Solids Removed [Q_s]

⎘ Copy

👎

Formula

✖

Sewage Inflow Per Day given Total Solids Removed

Formula

`"Q"_{"s"} = ("M"^{"'"}-("Q"_{"w"}*("X"^{"R"}-"X"^{"E"})))/"X"^{"E"}`

Example

`"3.174383m³/s"=("2kg/d"-("9.5m³/s"*("2mg/L"-"3mg/L")))/"3mg/L"`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Sewage Inflow Per Day given Total Solids Removed Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sewage Discharge = (Mass of solids leaving the system-(Volume of Wasted Sludge per day*(Concentration of solids-Concentration of solids in the effluent)))/Concentration of solids in the effluent
Q_s = (M^'-(Q_w*(X^R-X^E)))/X^E
This formula uses 5 Variables

Variables Used

Sewage Discharge - (Measured in Cubic Meter per Second) - Sewage discharge is the flow rate of sewage when it is being discharged in the river.
Mass of solids leaving the system - (Measured in Kilogram per Second) - Mass of solids leaving the system is calculated in terms of mass per day.
Volume of Wasted Sludge per day - (Measured in Cubic Meter per Second) - Volume of wasted sludge per day is measured in terms of discharge.
Concentration of solids - (Measured in Kilogram per Cubic Meter) - Concentration of solids in the returned sludge or in the wasted sludge.
Concentration of solids in the effluent - (Measured in Kilogram per Cubic Meter) - Concentration of solids in the effluent is in the terms of density.

STEP 1: Convert Input(s) to Base Unit

Mass of solids leaving the system: 2 Kilogram per Day --> 2.31481481481481E-05 Kilogram per Second (Check conversion here)
Volume of Wasted Sludge per day: 9.5 Cubic Meter per Second --> 9.5 Cubic Meter per Second No Conversion Required
Concentration of solids: 2 Milligram per Liter --> 0.002 Kilogram per Cubic Meter (Check conversion here)
Concentration of solids in the effluent: 3 Milligram per Liter --> 0.003 Kilogram per Cubic Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_s = (M^'-(Q_w*(X^R-X^E)))/X^E --> (2.31481481481481E-05-(9.5*(0.002-0.003)))/0.003

Evaluating ... ...

Q_s = 3.17438271604938

STEP 3: Convert Result to Output's Unit

3.17438271604938 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

3.17438271604938 ≈ 3.174383 Cubic Meter per Second <-- Sewage Discharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Sewage » Sludge Age » Sewage Inflow » Sewage Inflow Per Day given Total Solids Removed

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 4 Sewage Inflow Calculators

Sewage Inflow Per Day given Sludge Age

Go Sewage Discharge = (((Volume of Tank*MLSS)/Sludge Age)-(Volume of Wasted Sludge per day*(Concentration of solids-Concentration of solids in the effluent)))/Concentration of solids in the effluent

Sewage Inflow Per Day given Mass of Wasted Activated Sludge

Go Sewage Discharge = (Mass of Solids+(Endogenous Respiration Rate Constant*Volume of Tank*MLSS))/(Maximum Yield Coefficient*(Influent BOD-Effluent BOD))

Sewage Inflow Per Day given Total Solids Removed

Go Sewage Discharge = (Mass of solids leaving the system-(Volume of Wasted Sludge per day*(Concentration of solids-Concentration of solids in the effluent)))/Concentration of solids in the effluent

Sewage Inflow Per Day given Mass of Solids Removed

Go Sewage Discharge = (Mass of Solids/Concentration of solids in the effluent)+Volume of Wasted Sludge per day

Sewage Inflow Per Day given Total Solids Removed Formula

What is sewage ?

Sewage, or domestic/municipal wastewater, is a type of wastewater that is produced by a community of people. ... Sewage usually travels from a building's plumbing either into a sewer, which will carry it elsewhere, or into an onsite sewage facility (of which there are many kinds).

How to Calculate Sewage Inflow Per Day given Total Solids Removed?

Sewage Inflow Per Day given Total Solids Removed calculator uses Sewage Discharge = (Mass of solids leaving the system-(Volume of Wasted Sludge per day*(Concentration of solids-Concentration of solids in the effluent)))/Concentration of solids in the effluent to calculate the Sewage Discharge, Sewage Inflow Per Day given Total Solids Removed calculates sewage discharge or inflow per day when we have prior information of other parameters used. Sewage Discharge is denoted by Q_s symbol.

How to calculate Sewage Inflow Per Day given Total Solids Removed using this online calculator? To use this online calculator for Sewage Inflow Per Day given Total Solids Removed, enter Mass of solids leaving the system (M^'), Volume of Wasted Sludge per day (Q_w), Concentration of solids (X^R) & Concentration of solids in the effluent (X^E) and hit the calculate button. Here is how the Sewage Inflow Per Day given Total Solids Removed calculation can be explained with given input values -> 3.174383 = (2.31481481481481E-05-(9.5*(0.002-0.003)))/0.003.

FAQ

What is Sewage Inflow Per Day given Total Solids Removed?

Sewage Inflow Per Day given Total Solids Removed calculates sewage discharge or inflow per day when we have prior information of other parameters used and is represented as Q_s = (M^'-(Q_w*(X^R-X^E)))/X^E or Sewage Discharge = (Mass of solids leaving the system-(Volume of Wasted Sludge per day*(Concentration of solids-Concentration of solids in the effluent)))/Concentration of solids in the effluent. Mass of solids leaving the system is calculated in terms of mass per day, Volume of wasted sludge per day is measured in terms of discharge, Concentration of solids in the returned sludge or in the wasted sludge & Concentration of solids in the effluent is in the terms of density.

How to calculate Sewage Inflow Per Day given Total Solids Removed?

Sewage Inflow Per Day given Total Solids Removed calculates sewage discharge or inflow per day when we have prior information of other parameters used is calculated using Sewage Discharge = (Mass of solids leaving the system-(Volume of Wasted Sludge per day*(Concentration of solids-Concentration of solids in the effluent)))/Concentration of solids in the effluent. To calculate Sewage Inflow Per Day given Total Solids Removed, you need Mass of solids leaving the system (M^'), Volume of Wasted Sludge per day (Q_w), Concentration of solids (X^R) & Concentration of solids in the effluent (X^E). With our tool, you need to enter the respective value for Mass of solids leaving the system, Volume of Wasted Sludge per day, Concentration of solids & Concentration of solids in the effluent and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Sewage Discharge?

In this formula, Sewage Discharge uses Mass of solids leaving the system, Volume of Wasted Sludge per day, Concentration of solids & Concentration of solids in the effluent. We can use 3 other way(s) to calculate the same, which is/are as follows -

Sewage Discharge = (Mass of Solids/Concentration of solids in the effluent)+Volume of Wasted Sludge per day
Sewage Discharge = (((Volume of Tank*MLSS)/Sludge Age)-(Volume of Wasted Sludge per day*(Concentration of solids-Concentration of solids in the effluent)))/Concentration of solids in the effluent
Sewage Discharge = (Mass of Solids+(Endogenous Respiration Rate Constant*Volume of Tank*MLSS))/(Maximum Yield Coefficient*(Influent BOD-Effluent BOD))

Home

FREE PDFs

🔍 Search