Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable Calculator

Cable Span - (Measured in Meter) - Cable Span is total length of cable in horizontal direction.
Catenary Parameter - (Measured in Meter) - Catenary Parameter is factor found when load in increased due to self weight.

STEP 1: Convert Input(s) to Base Unit

Catenary Parameter: 19.56 Meter --> 19.56 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L_span = 2*c --> 2*19.56

Evaluating ... ...

L_span = 39.12

STEP 3: Convert Result to Output's Unit

39.12 Meter --> No Conversion Required

FINAL ANSWER

39.12 Meter <-- Cable Span

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Bridge and Suspension Cable » Suspension Cables » Cable System, Sag and Drainage on Bridges » Catenary Cable Sag and Distance between Supports » Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 6 Catenary Cable Sag and Distance between Supports Calculators

Maximum Sag given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Maximum Sag = (-Catenary Parameter)+(Tension at Supports/Uniformly Distributed Load)

Tension at Supports given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Tension at Supports = (Maximum Sag+Catenary Parameter)*Uniformly Distributed Load

UDL given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter)

Catenary Parameter for UDL on Catenary Parabolic Cable

Go Catenary Parameter = (Tension at Supports/Uniformly Distributed Load)-Maximum Sag

Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Sag of Cable = Maximum Sag+Catenary Parameter

Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable

Go Cable Span = 2*Catenary Parameter

Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable Formula

Cable Span = 2*Catenary Parameter
L_span = 2*c

What is Cable Span?

Cable Span is the aerial distance between two poles or towers, meaning the physical resistance of the jacket to support its own weight.

What is Catenary?

Catenary is the curve that an idealized hanging chain or cable assumes under its own weight when supported only at its ends. The catenary curve has a U-like shape, superficially similar in appearance to a parabolic arch, but it is not a parabola.

How to Calculate Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable?

Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable calculator uses Cable Span = 2*Catenary Parameter to calculate the Cable Span, The Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total projected horizontal length of the cable. Cable Span is denoted by L_span symbol.

How to calculate Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable using this online calculator? To use this online calculator for Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable, enter Catenary Parameter (c) and hit the calculate button. Here is how the Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable calculation can be explained with given input values -> 20 = 2*19.56.

FAQ

What is Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable?

The Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total projected horizontal length of the cable and is represented as L_span = 2*c or Cable Span = 2*Catenary Parameter. Catenary Parameter is factor found when load in increased due to self weight.

How to calculate Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable?

The Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total projected horizontal length of the cable is calculated using Cable Span = 2*Catenary Parameter. To calculate Span of Cable given Catenary Parameter for UDL on Catenary Parabolic Cable, you need Catenary Parameter (c). With our tool, you need to enter the respective value for Catenary Parameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search