Tensile Force on Butt Welded Plates given Thickness of Plate Calculator

✖Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.ⓘ Tensile Stress in Weld [σ_t]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖Throat thickness of weld is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness of Weld [h_t]			+10% -10%

✖Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.ⓘ Tensile Force on Butt Welded Plates given Thickness of Plate [P]

⎘ Copy

👎

Formula

✖

Tensile Force on Butt Welded Plates given Thickness of Plate

Formula

`"P" = "σ"_{"t"}*"L"*"h"_{"t"}`

Example

`"16.497kN"="56.4N/mm²"*"19.5mm"*"15mm"`

Calculator

LaTeX

Reset

👍

Download Butt Welds Formulas PDF

Tensile Force on Butt Welded Plates given Thickness of Plate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld
P = σ_t*L*h_t
This formula uses 4 Variables

Variables Used

Tensile Force on Welded Plates - (Measured in Newton) - Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.
Tensile Stress in Weld - (Measured in Pascal) - Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Throat Thickness of Weld - (Measured in Meter) - Throat thickness of weld is the shortest distance from the root to the face of the weld.

STEP 1: Convert Input(s) to Base Unit

Tensile Stress in Weld: 56.4 Newton per Square Millimeter --> 56400000 Pascal (Check conversion here)
Length of Weld: 19.5 Millimeter --> 0.0195 Meter (Check conversion here)
Throat Thickness of Weld: 15 Millimeter --> 0.015 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = σ_t*L*h_t --> 56400000*0.0195*0.015

Evaluating ... ...

P = 16497

STEP 3: Convert Result to Output's Unit

16497 Newton -->16.497 Kilonewton (Check conversion here)

FINAL ANSWER

16.497 Kilonewton <-- Tensile Force on Welded Plates

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Butt Welds » Tensile Force on Butt Welded Plates given Thickness of Plate

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< 16 Butt Welds Calculators

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints)

Thickness of Plate given Efficiency of Butt Welded Joint

Go Welded Base Plate Thickness = Tensile Force on Welded Plates/(Tensile Stress in Weld*Length of Weld*Efficiency of Welded Joints)

Length of Butt Weld given Efficiency of Welded Joint

Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints)

Efficiency of Butt Welded Joint

Go Efficiency of Welded Joints = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld)

Tensile Force on Plates given Efficiency of Butt Welded Joint

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints

Tensile Stress in Boiler Butt Weld given Thickness of Boiler Shell

Go Tensile Stress in Boiler Butt Weld = Internal pressure in boiler*Inner diameter of boiler/(2*Thickness of Boiler Wall)

Thickness of Welded Boiler Shell given Stress in Weld

Go Thickness of Boiler Wall = Internal pressure in boiler*Inner diameter of boiler/(2*Tensile Stress in Boiler Butt Weld)

Internal Pressure in Boiler given Thickness of Welded Boiler Shell

Go Internal pressure in boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Inner diameter of boiler

Inner Diameter of Boiler given Thickness of Welded Boiler Shell

Go Inner diameter of boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Internal pressure in boiler

Strength of Butt Welded Joint

Go Tensile Stress in Butt Weld = Tensile Force on Welded Plates/(Throat Thickness of Weld*Length of Butt Weld)

Permissible Tensile Stress in Butt Weld

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Welded Base Plate Thickness)

Length of Butt Weld given Average Tensile Stress in Weld

Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Throat Thickness of Weld)

Throat of Butt Weld given Average Tensile Stress

Go Throat Thickness of Weld = Tensile Force on Welded Plates/(Length of Weld*Tensile Stress in Weld)

Average Tensile Stress in Butt Weld

Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)

Tensile Force on Plates given Average Tensile Stress in Butt Weld

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld

Tensile Force on Butt Welded Plates given Thickness of Plate

Go Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld

Tensile Force on Butt Welded Plates given Thickness of Plate Formula

Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld
P = σ_t*L*h_t

Assumptions in Calculations of Tensile Force on Plates

Following assumptions are necessary while calculating Tensile Force on Plates.
1. The Load is uniformly distributed along the length of the load.
2. There is no localized concentration of stress in the Beads.
3. Uniform Welding has taken place i.e. thickness of Beads is uniform throughout.

How to Calculate Tensile Force on Butt Welded Plates given Thickness of Plate?

Tensile Force on Butt Welded Plates given Thickness of Plate calculator uses Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld to calculate the Tensile Force on Welded Plates, Tensile Force on Butt Welded Plates given Thickness of Plate is a way to determine the maximum Tension Load that a welded pair of plates with defined thickness can resist without yield or fail. It gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known. Tensile Force on Welded Plates is denoted by P symbol.

How to calculate Tensile Force on Butt Welded Plates given Thickness of Plate using this online calculator? To use this online calculator for Tensile Force on Butt Welded Plates given Thickness of Plate, enter Tensile Stress in Weld (σ_t), Length of Weld (L) & Throat Thickness of Weld (h_t) and hit the calculate button. Here is how the Tensile Force on Butt Welded Plates given Thickness of Plate calculation can be explained with given input values -> 0.16497 = 56400000*0.0195*0.015.

FAQ

What is Tensile Force on Butt Welded Plates given Thickness of Plate?

Tensile Force on Butt Welded Plates given Thickness of Plate is a way to determine the maximum Tension Load that a welded pair of plates with defined thickness can resist without yield or fail. It gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known and is represented as P = σ_t*L*h_t or Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld. Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension, The Length of Weld is the linear distance of the welding segment joined by the welded joint & Throat thickness of weld is the shortest distance from the root to the face of the weld.

How to calculate Tensile Force on Butt Welded Plates given Thickness of Plate?

Tensile Force on Butt Welded Plates given Thickness of Plate is a way to determine the maximum Tension Load that a welded pair of plates with defined thickness can resist without yield or fail. It gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known is calculated using Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld. To calculate Tensile Force on Butt Welded Plates given Thickness of Plate, you need Tensile Stress in Weld (σ_t), Length of Weld (L) & Throat Thickness of Weld (h_t). With our tool, you need to enter the respective value for Tensile Stress in Weld, Length of Weld & Throat Thickness of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Force on Welded Plates?

In this formula, Tensile Force on Welded Plates uses Tensile Stress in Weld, Length of Weld & Throat Thickness of Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -

Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld
Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints

Home

FREE PDFs

🔍 Search