Tensile Force on Plates given Efficiency of Butt Welded Joint Solution

STEP 0: Pre-Calculation Summary
Formula Used
Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints
P = σt*tp*L*η
This formula uses 5 Variables
Variables Used
Tensile Force on Welded Plates - (Measured in Newton) - Tensile Force on Welded Plates is the stretching force acting on the plates that are welded.
Tensile Stress in Weld - (Measured in Pascal) - Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension.
Welded Base Plate Thickness - (Measured in Meter) - Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Efficiency of Welded Joints - The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.
STEP 1: Convert Input(s) to Base Unit
Tensile Stress in Weld: 56.4 Newton per Square Millimeter --> 56400000 Pascal (Check conversion here)
Welded Base Plate Thickness: 18 Millimeter --> 0.018 Meter (Check conversion here)
Length of Weld: 19.5 Millimeter --> 0.0195 Meter (Check conversion here)
Efficiency of Welded Joints: 0.833 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = σt*tp*L*η --> 56400000*0.018*0.0195*0.833
Evaluating ... ...
P = 16490.4012
STEP 3: Convert Result to Output's Unit
16490.4012 Newton -->16.4904012 Kilonewton (Check conversion here)
FINAL ANSWER
16.4904012 16.4904 Kilonewton <-- Tensile Force on Welded Plates
(Calculation completed in 00.020 seconds)

Credits

Created by Kumar Siddhant
Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur
Kumar Siddhant has created this Calculator and 400+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

16 Butt Welds Calculators

Permissible Tensile Stress in Butt Weld given Efficiency of Welded joint
Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints)
Thickness of Plate given Efficiency of Butt Welded Joint
Go Welded Base Plate Thickness = Tensile Force on Welded Plates/(Tensile Stress in Weld*Length of Weld*Efficiency of Welded Joints)
Length of Butt Weld given Efficiency of Welded Joint
Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Efficiency of Welded Joints)
Efficiency of Butt Welded Joint
Go Efficiency of Welded Joints = Tensile Force on Welded Plates/(Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld)
Tensile Force on Plates given Efficiency of Butt Welded Joint
Go Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints
Tensile Stress in Boiler Butt Weld given Thickness of Boiler Shell
Go Tensile Stress in Boiler Butt Weld = Internal pressure in boiler*Inner diameter of boiler/(2*Thickness of Boiler Wall)
Thickness of Welded Boiler Shell given Stress in Weld
Go Thickness of Boiler Wall = Internal pressure in boiler*Inner diameter of boiler/(2*Tensile Stress in Boiler Butt Weld)
Internal Pressure in Boiler given Thickness of Welded Boiler Shell
Go Internal pressure in boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Inner diameter of boiler
Inner Diameter of Boiler given Thickness of Welded Boiler Shell
Go Inner diameter of boiler = Thickness of Boiler Wall*2*Tensile Stress in Boiler Butt Weld/Internal pressure in boiler
Strength of Butt Welded Joint
Go Tensile Stress in Butt Weld = Tensile Force on Welded Plates/(Throat Thickness of Weld*Length of Butt Weld)
Permissible Tensile Stress in Butt Weld
Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Welded Base Plate Thickness)
Length of Butt Weld given Average Tensile Stress in Weld
Go Length of Weld = Tensile Force on Welded Plates/(Tensile Stress in Weld*Throat Thickness of Weld)
Throat of Butt Weld given Average Tensile Stress
Go Throat Thickness of Weld = Tensile Force on Welded Plates/(Length of Weld*Tensile Stress in Weld)
Average Tensile Stress in Butt Weld
Go Tensile Stress in Weld = Tensile Force on Welded Plates/(Length of Weld*Throat Thickness of Weld)
Tensile Force on Plates given Average Tensile Stress in Butt Weld
Go Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld
Tensile Force on Butt Welded Plates given Thickness of Plate
Go Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld

Tensile Force on Plates given Efficiency of Butt Welded Joint Formula

Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints
P = σt*tp*L*η

Failure in Welded Joints

For a welded joint in tension, failure may occur majorly in two ways
1. When Joint efficiency is greater than 1 - The Tensile Yield Strength of the Base Plate is lesser than that of the weld, and failure occurs due to yielding in the plate.
2. When Joint efficiency is smaller than 1 - The Tensile Yield Strength of the Weld Beads is lesser than that of the Base Plate, and failure occurs due to yielding at the joint.

How to Calculate Tensile Force on Plates given Efficiency of Butt Welded Joint?

Tensile Force on Plates given Efficiency of Butt Welded Joint calculator uses Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints to calculate the Tensile Force on Welded Plates, Tensile Force on Plates given Efficiency of Butt Welded Joint gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known. Tensile Force on Welded Plates is denoted by P symbol.

How to calculate Tensile Force on Plates given Efficiency of Butt Welded Joint using this online calculator? To use this online calculator for Tensile Force on Plates given Efficiency of Butt Welded Joint, enter Tensile Stress in Weld t), Welded Base Plate Thickness (tp), Length of Weld (L) & Efficiency of Welded Joints (η) and hit the calculate button. Here is how the Tensile Force on Plates given Efficiency of Butt Welded Joint calculation can be explained with given input values -> 0.01649 = 56400000*0.018*0.0195*0.833.

FAQ

What is Tensile Force on Plates given Efficiency of Butt Welded Joint?
Tensile Force on Plates given Efficiency of Butt Welded Joint gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known and is represented as P = σt*tp*L*η or Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints. Tensile Stress in Weld is the average stress experienced by the Weld Beads when the joint plates are brought to tension, Welded Base Plate Thickness is defined as the thickness of the base plate that is welded to another plate, The Length of Weld is the linear distance of the welding segment joined by the welded joint & The Efficiency of Welded Joints refers to the strength of a welded joint with respect to the strength of the base metal.
How to calculate Tensile Force on Plates given Efficiency of Butt Welded Joint?
Tensile Force on Plates given Efficiency of Butt Welded Joint gives the maximum tension force the Weld Beads can withstand before the welding breaks off. It depends on the type of weld, filler material used, and depth of the weld. It is a method to determine the maximum tensile load, a welded structure can survive without yield when the efficiency of the weld is known is calculated using Tensile Force on Welded Plates = Tensile Stress in Weld*Welded Base Plate Thickness*Length of Weld*Efficiency of Welded Joints. To calculate Tensile Force on Plates given Efficiency of Butt Welded Joint, you need Tensile Stress in Weld t), Welded Base Plate Thickness (tp), Length of Weld (L) & Efficiency of Welded Joints (η). With our tool, you need to enter the respective value for Tensile Stress in Weld, Welded Base Plate Thickness, Length of Weld & Efficiency of Welded Joints and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Tensile Force on Welded Plates?
In this formula, Tensile Force on Welded Plates uses Tensile Stress in Weld, Welded Base Plate Thickness, Length of Weld & Efficiency of Welded Joints. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Tensile Force on Welded Plates = Tensile Stress in Weld*Throat Thickness of Weld*Length of Weld
  • Tensile Force on Welded Plates = Tensile Stress in Weld*Length of Weld*Throat Thickness of Weld
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!