Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 300+ more calculators!
Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 50+ more calculators!

10 Other formulas that you can solve using the same Inputs

Maximum Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Maximum Sag=(-Catenary Parameter)+(Tension at Supports/Uniformly Distributed Load) GO
Tension at Supports when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Tension at Supports=(Maximum Sag+Catenary Parameter)*Uniformly Distributed Load GO
UDL when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Uniformly Distributed Load=Tension at Supports/(Maximum Sag+Catenary Parameter) GO
Span of Cable when Length of Cable for UDL on Parabolic Cable is Given
Cable Span=1.5*Length of Cable-sqrt((2.25*Length of Cable^2)-8*(Maximum Sag^2)) GO
Catenary Parameter for UDL on Catenary Parabolic Cable
Catenary Parameter=(Tension at Supports/Uniformly Distributed Load)-Maximum Sag GO
UDL when Tension at Midspan for UDL on Parabolic Cable is Given
Uniformly Distributed Load=8*Midspan Tension*Maximum Sag/(Length of Cable^2) GO
Tension at Midspan for UDL on Parabolic Cable
Midspan Tension=(Uniformly Distributed Load*(Cable Span^2))/(8*Maximum Sag) GO
Span of Cable when Tension at Midspan for UDL on Parabolic Cable is Given
Cable Span=sqrt(8*Midspan Tension*Maximum Sag/Uniformly Distributed Load) GO
Length of Cable for UDL on Parabolic Cable is Given
Length of Cable=Cable Span+8*(Maximum Sag^2)/(3*Cable Span) GO
Span of Cable when Catenary Parameter for UDL on Catenary Parabolic Cable is Given
Cable Span=2*Catenary Parameter GO

2 Other formulas that calculate the same Output

Sag of Cable at midway between supports when Maximum Reactions at Supports is Given
Sag of Cable at Midway between Supports=((Cable Span^2)/16)/((((2*Maximum Tension)/(Uniformly Distributed Load*Cable Span))^2)-1) GO
Sag of Cable at midway between supports when Horizontal Component of Cable Tension for UDL is Given
Sag of Cable at Midway between Supports=Uniformly Distributed Load*(Cable Span^2)/(8*Midspan Tension) GO

Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given Formula

Sag of Cable at Midway between Supports=Maximum Sag+Catenary Parameter
f=d+c
More formulas
Catenary Parameter for UDL on Catenary Parabolic Cable GO
Maximum Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given GO
Tension at Supports when Catenary Parameter for UDL on Catenary Parabolic Cable is Given GO
UDL when Catenary Parameter for UDL on Catenary Parabolic Cable is Given GO
Span of Cable when Catenary Parameter for UDL on Catenary Parabolic Cable is Given GO

What is Sag ?

The vertical distance between the straight line joining the points of consecutive supports and the lowest point of the conductor is called sag. The tighter the wire, the smaller is the sag and vice-versa.

How to Calculate Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given?

Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given calculator uses Sag of Cable at Midway between Supports=Maximum Sag+Catenary Parameter to calculate the Sag of Cable at Midway between Supports, The Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given is defined as total vertical deflection of cable at midpoint due to UDL. Sag of Cable at Midway between Supports and is denoted by f symbol.

How to calculate Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given using this online calculator? To use this online calculator for Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given, enter Maximum Sag (d) and Catenary Parameter (c) and hit the calculate button. Here is how the Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given calculation can be explained with given input values -> 20 = 10+10.

FAQ

What is Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given?
The Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given is defined as total vertical deflection of cable at midpoint due to UDL and is represented as f=d+c or Sag of Cable at Midway between Supports=Maximum Sag+Catenary Parameter. Maximum Sag is defined as maximum catenary formed in cable and Catenary Parameter is factor found when load in increased due to self weight.
How to calculate Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given?
The Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given is defined as total vertical deflection of cable at midpoint due to UDL is calculated using Sag of Cable at Midway between Supports=Maximum Sag+Catenary Parameter. To calculate Total Sag when Catenary Parameter for UDL on Catenary Parabolic Cable is Given, you need Maximum Sag (d) and Catenary Parameter (c). With our tool, you need to enter the respective value for Maximum Sag and Catenary Parameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Sag of Cable at Midway between Supports?
In this formula, Sag of Cable at Midway between Supports uses Maximum Sag and Catenary Parameter. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Sag of Cable at Midway between Supports=Uniformly Distributed Load*(Cable Span^2)/(8*Midspan Tension)
  • Sag of Cable at Midway between Supports=((Cable Span^2)/16)/((((2*Maximum Tension)/(Uniformly Distributed Load*Cable Span))^2)-1)
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!