Total Storage Capacity of Reservoir Calculator

✖Numerical Coefficient a is a constant multiplier of the variables in a term used in determining total storage capacity.ⓘ Numerical Coefficient a [a]			+10% -10%
✖Numerical Coefficient b is a constant multiplier of the variables in a term used in determining total storage capacity.ⓘ Numerical Coefficient b [b]			+10% -10%
✖Average Domestic Demand refers to the average amount of water or other resources used by households within a specific area over a certain period, usually measured in gallons per day or liters per day.ⓘ Average Domestic Demand [D]			+10% -10%
✖Fire Demand is the amount of water required to extinguish fire.ⓘ Fire Demand [F]			+10% -10%
✖Capacity of Pump refers to the volume of fluid (such as water, sewage, or other liquids) that the pump is capable of moving within a given amount of time.ⓘ Capacity of Pump [P]			+10% -10%

✖Total Storage Capacity refers to the maximum volume or amount of water that a reservoir, basin, or any water storage system can hold under normal operating conditions.ⓘ Total Storage Capacity of Reservoir [T]

⎘ Copy

👎

Formula

✖

Total Storage Capacity of Reservoir

Formula

`"T" = ("a"+"b"+(10/24))*"D"+(10/24)*("F"-"P")`

Example

`"505.0833L/d"=("0.2"+"0.1"+(10/24))*"135L/d"+(10/24)*("1100L/d"-"120L/d")`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Total Storage Capacity of Reservoir Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Storage Capacity = (Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand+(10/24)*(Fire Demand-Capacity of Pump)
T = (a+b+(10/24))*D+(10/24)*(F-P)
This formula uses 6 Variables

Variables Used

Total Storage Capacity - (Measured in Cubic Meter per Second) - Total Storage Capacity refers to the maximum volume or amount of water that a reservoir, basin, or any water storage system can hold under normal operating conditions.
Numerical Coefficient a - Numerical Coefficient a is a constant multiplier of the variables in a term used in determining total storage capacity.
Numerical Coefficient b - Numerical Coefficient b is a constant multiplier of the variables in a term used in determining total storage capacity.
Average Domestic Demand - (Measured in Cubic Meter per Second) - Average Domestic Demand refers to the average amount of water or other resources used by households within a specific area over a certain period, usually measured in gallons per day or liters per day.
Fire Demand - (Measured in Cubic Meter per Second) - Fire Demand is the amount of water required to extinguish fire.
Capacity of Pump - (Measured in Cubic Meter per Second) - Capacity of Pump refers to the volume of fluid (such as water, sewage, or other liquids) that the pump is capable of moving within a given amount of time.

STEP 1: Convert Input(s) to Base Unit

Numerical Coefficient a: 0.2 --> No Conversion Required
Numerical Coefficient b: 0.1 --> No Conversion Required
Average Domestic Demand: 135 Liter per day --> 1.5625E-06 Cubic Meter per Second (Check conversion here)
Fire Demand: 1100 Liter per day --> 1.27314814814815E-05 Cubic Meter per Second (Check conversion here)
Capacity of Pump: 120 Liter per day --> 1.38888888888889E-06 Cubic Meter per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T = (a+b+(10/24))*D+(10/24)*(F-P) --> (0.2+0.1+(10/24))*1.5625E-06+(10/24)*(1.27314814814815E-05-1.38888888888889E-06)

Evaluating ... ...

T = 5.84587191358025E-06

STEP 3: Convert Result to Output's Unit

5.84587191358025E-06 Cubic Meter per Second -->505.083333333334 Liter per day (Check conversion here)

FINAL ANSWER

505.083333333334 ≈ 505.0833 Liter per day <-- Total Storage Capacity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Distribution of Water » Capacity of Distribution Reservoir » Total Storage Capacity of Reservoir

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 8 Capacity of Distribution Reservoir Calculators

Fire Demand given Total Storage Capacity

Go Fire Demand = (Total Storage Capacity-((Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24)

Average Domestic Demand given Total Storage Capacity

Go Average Domestic Demand = (Total Storage Capacity-((10/24)*(Fire Demand-Capacity of Pump)))/(Numerical Coefficient a+Numerical Coefficient b+(10/24))

Total Storage Capacity of Reservoir

Go Total Storage Capacity = (Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand+(10/24)*(Fire Demand-Capacity of Pump)

Fire Demand given Value of McDonald Coefficient

Go Fire Demand = (Total Storage Capacity-((0.2+0.1+(10/24))*Average Domestic Demand)+((10/24)*Capacity of Pump))/(10/24)

Reserve Fire Pumping Capacity given Reserve Storage

Go Capacity of Pump = Fire Demand-(Reserve Storage/Duration of Fire)

Fire Duration given Reserve Storage

Go Duration of Fire = Reserve Storage/(Fire Demand-Capacity of Pump)

Fire Demand given Reserve Storage

Go Fire Demand = (Reserve Storage/Duration of Fire)+Capacity of Pump

Reserve Storage

Go Reserve Storage = (Fire Demand-Capacity of Pump)*Duration of Fire

Total Storage Capacity of Reservoir Formula

Total Storage Capacity = (Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand+(10/24)*(Fire Demand-Capacity of Pump)
T = (a+b+(10/24))*D+(10/24)*(F-P)

What is Storage Reservoir?

The pool of water created by the construction of a dam across a river is called reservoir. When the reservoir remains in water supply during the rainy season and releases it during dry period as per requirement, it is called storage or impounded reservoir.

How to Calculate Total Storage Capacity of Reservoir?

Total Storage Capacity of Reservoir calculator uses Total Storage Capacity = (Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand+(10/24)*(Fire Demand-Capacity of Pump) to calculate the Total Storage Capacity, The Total Storage Capacity of Reservoir is defined as the total volume of water that a reservoir can hold when filled to its maximum capacity. when we have prior information of other parameters used. Total Storage Capacity is denoted by T symbol.

How to calculate Total Storage Capacity of Reservoir using this online calculator? To use this online calculator for Total Storage Capacity of Reservoir, enter Numerical Coefficient a (a), Numerical Coefficient b (b), Average Domestic Demand (D), Fire Demand (F) & Capacity of Pump (P) and hit the calculate button. Here is how the Total Storage Capacity of Reservoir calculation can be explained with given input values -> 4.4E+10 = (0.2+0.1+(10/24))*1.5625E-06+(10/24)*(1.27314814814815E-05-1.38888888888889E-06).

FAQ

What is Total Storage Capacity of Reservoir?

The Total Storage Capacity of Reservoir is defined as the total volume of water that a reservoir can hold when filled to its maximum capacity. when we have prior information of other parameters used and is represented as T = (a+b+(10/24))*D+(10/24)*(F-P) or Total Storage Capacity = (Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand+(10/24)*(Fire Demand-Capacity of Pump). Numerical Coefficient a is a constant multiplier of the variables in a term used in determining total storage capacity, Numerical Coefficient b is a constant multiplier of the variables in a term used in determining total storage capacity, Average Domestic Demand refers to the average amount of water or other resources used by households within a specific area over a certain period, usually measured in gallons per day or liters per day, Fire Demand is the amount of water required to extinguish fire & Capacity of Pump refers to the volume of fluid (such as water, sewage, or other liquids) that the pump is capable of moving within a given amount of time.

How to calculate Total Storage Capacity of Reservoir?

The Total Storage Capacity of Reservoir is defined as the total volume of water that a reservoir can hold when filled to its maximum capacity. when we have prior information of other parameters used is calculated using Total Storage Capacity = (Numerical Coefficient a+Numerical Coefficient b+(10/24))*Average Domestic Demand+(10/24)*(Fire Demand-Capacity of Pump). To calculate Total Storage Capacity of Reservoir, you need Numerical Coefficient a (a), Numerical Coefficient b (b), Average Domestic Demand (D), Fire Demand (F) & Capacity of Pump (P). With our tool, you need to enter the respective value for Numerical Coefficient a, Numerical Coefficient b, Average Domestic Demand, Fire Demand & Capacity of Pump and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search