Ultimate Strength when Wind Loads are Applied Calculator

✖Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).ⓘ Dead Load [DL]			+10% -10%
✖Wind Load is the load, placed on the exterior of a structure by wind.ⓘ Wind Load [W]			+10% -10%

✖ultimate strengths is the capacities to resist design loads and their related internal moments and forces.ⓘ Ultimate Strength when Wind Loads are Applied [U]

⎘ Copy

👎

Formula

✖

Ultimate Strength when Wind Loads are Applied

Formula

`"U" = (0.9*"DL")+(1.3*"W")`

Example

`"18.109kN/m²"=(0.9*"10.01kN/m²")+(1.3*"7kN/m²")`

Calculator

LaTeX

Reset

👍

Download Design of Two Way Slab System and Footing Formulas PDF PDF Image

Ultimate Strength when Wind Loads are Applied Solution

STEP 0: Pre-Calculation Summary

Formula Used

Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)
U = (0.9*DL)+(1.3*W)
This formula uses 3 Variables

Variables Used

Ultimate Strength - (Measured in Pascal) - ultimate strengths is the capacities to resist design loads and their related internal moments and forces.
Dead Load - (Measured in Pascal) - Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).
Wind Load - (Measured in Pascal) - Wind Load is the load, placed on the exterior of a structure by wind.

STEP 1: Convert Input(s) to Base Unit

Dead Load: 10.01 Kilonewton per Square Meter --> 10010 Pascal (Check conversion here)
Wind Load: 7 Kilonewton per Square Meter --> 7000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

U = (0.9*DL)+(1.3*W) --> (0.9*10010)+(1.3*7000)

Evaluating ... ...

U = 18109

STEP 3: Convert Result to Output's Unit

18109 Pascal -->18.109 Kilonewton per Square Meter (Check conversion here)

FINAL ANSWER

18.109 Kilonewton per Square Meter <-- Ultimate Strength

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Concrete Structures » Design of Two Way Slab System and Footing » Partial Safety Factors for Loads » Ultimate Strength when Wind Loads are Applied

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< 6 Partial Safety Factors for Loads Calculators

Basic Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

Go Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

Go Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)

Basic Load Effect given Ultimate Strength for Applied Wind Loads

Go Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9)

Wind Load Effect given Ultimate Strength for Applied Wind Loads

Go Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3)

Ultimate Strength when Wind and Earthquake Loads are not Applied

Go Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)

Ultimate Strength when Wind Loads are Applied

Go Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Ultimate Strength when Wind Loads are Applied Formula

Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)
U = (0.9*DL)+(1.3*W)

What is Ultimate Strength?

The Ultimate Strength is defined as capacities to resist design loads and their related internal moments and forces.

How to Calculate Ultimate Strength when Wind Loads are Applied?

Ultimate Strength when Wind Loads are Applied calculator uses Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load) to calculate the Ultimate Strength, The Ultimate Strength when Wind Loads are Applied formula is defined as capacities to resist design loads and their related internal moments and forces. Ultimate Strength is denoted by U symbol.

How to calculate Ultimate Strength when Wind Loads are Applied using this online calculator? To use this online calculator for Ultimate Strength when Wind Loads are Applied, enter Dead Load (DL) & Wind Load (W) and hit the calculate button. Here is how the Ultimate Strength when Wind Loads are Applied calculation can be explained with given input values -> 0.0181 = (0.9*10010)+(1.3*7000).

FAQ

What is Ultimate Strength when Wind Loads are Applied?

The Ultimate Strength when Wind Loads are Applied formula is defined as capacities to resist design loads and their related internal moments and forces and is represented as U = (0.9*DL)+(1.3*W) or Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load). Dead Load consisting of basic load plus volume change due to (shrinkage,temperature) & Wind Load is the load, placed on the exterior of a structure by wind.

How to calculate Ultimate Strength when Wind Loads are Applied?

The Ultimate Strength when Wind Loads are Applied formula is defined as capacities to resist design loads and their related internal moments and forces is calculated using Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load). To calculate Ultimate Strength when Wind Loads are Applied, you need Dead Load (DL) & Wind Load (W). With our tool, you need to enter the respective value for Dead Load & Wind Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Ultimate Strength?

In this formula, Ultimate Strength uses Dead Load & Wind Load. We can use 1 other way(s) to calculate the same, which is/are as follows -

Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)

Home

FREE PDFs

🔍 Search