Voltage Distortion Factor in Single Tuned Filter Calculator

✖RMS Voltage in SVC is the voltage at a certain amount of frequency counted at nth harmonic.ⓘ RMS Voltage in SVC [V_n]			+10% -10%
✖Input Voltage in SVC is defined as the voltage of the bus or location in the power system where the SVC is installed.ⓘ Input Voltage in SVC [V_in]			+10% -10%

✖Voltage Distortion Factor in Single Tuned Filter is defined as the extent of distortion introduced by the filter on the voltage waveform.ⓘ Voltage Distortion Factor in Single Tuned Filter [D_n]

⎘ Copy

👎

Formula

✖

Voltage Distortion Factor in Single Tuned Filter

Formula

`"D"_{"n"} = "V"_{"n"}/"V"_{"in"}`

Example

`"4.926829"="20.2V"/"4.1V"`

Calculator

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Voltage Distortion Factor in Single Tuned Filter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Voltage Distortion Factor in Single Tuned Filter = RMS Voltage in SVC/Input Voltage in SVC
D_n = V_n/V_in
This formula uses 3 Variables

Variables Used

Voltage Distortion Factor in Single Tuned Filter - Voltage Distortion Factor in Single Tuned Filter is defined as the extent of distortion introduced by the filter on the voltage waveform.
RMS Voltage in SVC - (Measured in Volt) - RMS Voltage in SVC is the voltage at a certain amount of frequency counted at nth harmonic.
Input Voltage in SVC - (Measured in Volt) - Input Voltage in SVC is defined as the voltage of the bus or location in the power system where the SVC is installed.

STEP 1: Convert Input(s) to Base Unit

RMS Voltage in SVC: 20.2 Volt --> 20.2 Volt No Conversion Required
Input Voltage in SVC: 4.1 Volt --> 4.1 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_n = V_n/V_in --> 20.2/4.1

Evaluating ... ...

D_n = 4.92682926829268

STEP 3: Convert Result to Output's Unit

4.92682926829268 --> No Conversion Required

FINAL ANSWER

4.92682926829268 ≈ 4.926829 <-- Voltage Distortion Factor in Single Tuned Filter

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » FACTS Devices » Static Var Compensator(SVC) » Voltage Distortion Factor in Single Tuned Filter

Credits

Created by Dipanjona Mallick

Heritage Insitute of technology (HITK), Kolkata

Dipanjona Mallick has created this Calculator and 50+ more calculators!

Verified by Aman Dhussawat

GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI

Aman Dhussawat has verified this Calculator and 100+ more calculators!

< 4 Static Var Compensator(SVC) Calculators

Total Harmonic Distortion Factor

Go Total Harmonic Distortion Factor = 1/(Input Voltage in SVC)*sqrt(sum(x,2,Highest Order Harmonic,RMS Voltage in SVC^2))

Phase Constant of Line in SVC

Go Phase Constant of SVC = 2*pi*Lossless Line Frequency*sqrt(Line Length*Series Capacitance in the Line)

Steady State Change of SVC Voltage

Go Steady State Change in SVC Voltage = SVC Static Gain/(SVC Static Gain+SVC Gain)*SVC Reference Voltage

Voltage Distortion Factor in Single Tuned Filter

Go Voltage Distortion Factor in Single Tuned Filter = RMS Voltage in SVC/Input Voltage in SVC

Voltage Distortion Factor in Single Tuned Filter Formula

Voltage Distortion Factor in Single Tuned Filter = RMS Voltage in SVC/Input Voltage in SVC
D_n = V_n/V_in

What is Voltage Distortion Factor in Single Tuned Filter in SVCs?

The voltage distortion factor in the context of a Single-Tuned Filter (STF) used in Static Var Compensators (SVCs) is a measure of how much the filter impacts the distortion of the voltage waveform in the power system. SVCs with filters are employed to control and mitigate harmonics in the power system, and the voltage distortion factor quantifies the effectiveness of the filter in reducing harmonic distortion.

How to Calculate Voltage Distortion Factor in Single Tuned Filter?

Voltage Distortion Factor in Single Tuned Filter calculator uses Voltage Distortion Factor in Single Tuned Filter = RMS Voltage in SVC/Input Voltage in SVC to calculate the Voltage Distortion Factor in Single Tuned Filter, The Voltage Distortion Factor in Single Tuned Filter formula is defined as the measure of how much the filter impacts the distortion of the voltage waveform in the power system. Voltage Distortion Factor in Single Tuned Filter is denoted by D_n symbol.

How to calculate Voltage Distortion Factor in Single Tuned Filter using this online calculator? To use this online calculator for Voltage Distortion Factor in Single Tuned Filter, enter RMS Voltage in SVC (V_n) & Input Voltage in SVC (V_in) and hit the calculate button. Here is how the Voltage Distortion Factor in Single Tuned Filter calculation can be explained with given input values -> 4.926829 = 20.2/4.1.

FAQ

What is Voltage Distortion Factor in Single Tuned Filter?

The Voltage Distortion Factor in Single Tuned Filter formula is defined as the measure of how much the filter impacts the distortion of the voltage waveform in the power system and is represented as D_n = V_n/V_in or Voltage Distortion Factor in Single Tuned Filter = RMS Voltage in SVC/Input Voltage in SVC. RMS Voltage in SVC is the voltage at a certain amount of frequency counted at nth harmonic & Input Voltage in SVC is defined as the voltage of the bus or location in the power system where the SVC is installed.

How to calculate Voltage Distortion Factor in Single Tuned Filter?

The Voltage Distortion Factor in Single Tuned Filter formula is defined as the measure of how much the filter impacts the distortion of the voltage waveform in the power system is calculated using Voltage Distortion Factor in Single Tuned Filter = RMS Voltage in SVC/Input Voltage in SVC. To calculate Voltage Distortion Factor in Single Tuned Filter, you need RMS Voltage in SVC (V_n) & Input Voltage in SVC (V_in). With our tool, you need to enter the respective value for RMS Voltage in SVC & Input Voltage in SVC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search