Volume Flow Rate of Sludge Feed using Weight Flow Rate Calculator

✖Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time.ⓘ Weight Flow Rate of Sludge Feed [W_s]			+10% -10%
✖Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet.ⓘ Water Density [ρ_water]			+10% -10%
✖Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.ⓘ Specific Gravity of Sludge [G_s]			+10% -10%
✖Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.ⓘ Percent Solids [%S]			+10% -10%

✖Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time.ⓘ Volume Flow Rate of Sludge Feed using Weight Flow Rate [V]

⎘ Copy

👎

Formula

✖

Volume Flow Rate of Sludge Feed using Weight Flow Rate

Formula

`"V" = (7.48*"W"_{"s"})/("ρ"_{"water"}*"G"_{"s"}*"%S"*60)`

Example

`"6.99998gal (US)/min"=(7.48*"3153.36lb/h")/("62.4lb/ft³"*"2"*"0.45"*60)`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Volume Flow Rate of Sludge Feed using Weight Flow Rate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60)
V = (7.48*W_s)/(ρ_water*G_s*%S*60)
This formula uses 5 Variables

Variables Used

Volume Flow Rate of Sludge Feed - (Measured in Gallon (US) per Min) - Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time.
Weight Flow Rate of Sludge Feed - (Measured in Pound per Hour) - Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time.
Water Density - (Measured in Pound per Cubic Foot) - Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet.
Specific Gravity of Sludge - Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.
Percent Solids - Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.

STEP 1: Convert Input(s) to Base Unit

Weight Flow Rate of Sludge Feed: 3153.36 Pound per Hour --> 3153.36 Pound per Hour No Conversion Required
Water Density: 62.4 Pound per Cubic Foot --> 62.4 Pound per Cubic Foot No Conversion Required
Specific Gravity of Sludge: 2 --> No Conversion Required
Percent Solids: 0.45 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V = (7.48*W_s)/(ρ_water*G_s*%S*60) --> (7.48*3153.36)/(62.4*2*0.45*60)

Evaluating ... ...

V = 6.99998005698006

STEP 3: Convert Result to Output's Unit

0.00044163011658786 Cubic Meter per Second -->6.99998005698006 Gallon (US) per Min (Check conversion here)

FINAL ANSWER

6.99998005698006 ≈ 6.99998 Gallon (US) per Min <-- Volume Flow Rate of Sludge Feed

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of a Solid Bowl Centrifuge for Sludge Dewatering » Weight Flow Rate of Sludge Feed » Volume Flow Rate of Sludge Feed using Weight Flow Rate

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 4 Weight Flow Rate of Sludge Feed Calculators

Volume Flow Rate of Sludge Feed using Weight Flow Rate

Go Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60)

Percent Solids given Weight Flow Rate of Sludge Feed

Go Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60)

Specific Gravity of Sludge using Weight Flow Rate

Go Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60)

Weight Flow Rate of Sludge Feed

Go Weight Flow Rate of Sludge Feed = (Volume Flow Rate of Sludge Feed*Specific Gravity of Sludge*Water Density*Percent Solids*60)/7.48

Volume Flow Rate of Sludge Feed using Weight Flow Rate Formula

Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60)
V = (7.48*W_s)/(ρ_water*G_s*%S*60)

What is Specific Gravity of Sludge ?

The specific gravity of the dry volatile solids is about 1.0 and dry fixed solids about 2.5. The specific gravity of a particular mixture of sludges depends upon the relative fraction of volatile solids. Most wet raw sludges have a specific gravity ranging from about 1.01 to 1.03.

How to Calculate Volume Flow Rate of Sludge Feed using Weight Flow Rate?

Volume Flow Rate of Sludge Feed using Weight Flow Rate calculator uses Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60) to calculate the Volume Flow Rate of Sludge Feed, The Volume Flow Rate of Sludge Feed using Weight Flow Rate calculates volume of sludge flowing in a unit time when weight flow ,specific gravity of sludge , density of water and percent solid is known. Volume Flow Rate of Sludge Feed is denoted by V symbol.

How to calculate Volume Flow Rate of Sludge Feed using Weight Flow Rate using this online calculator? To use this online calculator for Volume Flow Rate of Sludge Feed using Weight Flow Rate, enter Weight Flow Rate of Sludge Feed (W_s), Water Density (ρ_water), Specific Gravity of Sludge (G_s) & Percent Solids (%S) and hit the calculate button. Here is how the Volume Flow Rate of Sludge Feed using Weight Flow Rate calculation can be explained with given input values -> 8318.405 = (7.48*0.397316676637457)/(999.552114545232*2*0.45*60).

FAQ

What is Volume Flow Rate of Sludge Feed using Weight Flow Rate?

The Volume Flow Rate of Sludge Feed using Weight Flow Rate calculates volume of sludge flowing in a unit time when weight flow ,specific gravity of sludge , density of water and percent solid is known and is represented as V = (7.48*W_s)/(ρ_water*G_s*%S*60) or Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60). Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time, Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet, Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound & Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.

How to calculate Volume Flow Rate of Sludge Feed using Weight Flow Rate?

The Volume Flow Rate of Sludge Feed using Weight Flow Rate calculates volume of sludge flowing in a unit time when weight flow ,specific gravity of sludge , density of water and percent solid is known is calculated using Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60). To calculate Volume Flow Rate of Sludge Feed using Weight Flow Rate, you need Weight Flow Rate of Sludge Feed (W_s), Water Density (ρ_water), Specific Gravity of Sludge (G_s) & Percent Solids (%S). With our tool, you need to enter the respective value for Weight Flow Rate of Sludge Feed, Water Density, Specific Gravity of Sludge & Percent Solids and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search