Volume of Tank given Mass of Solids in Reactor Calculator

✖Mass of solids means the actuall weight of the solid particle present in the sewage.ⓘ Mass of Solids [M_s]			+10% -10%
✖MLSS is the sum of volatile suspended solids (organics) and fixed suspended solids (inorganics).ⓘ MLSS [X]			+10% -10%

✖Volume of tank is defined as the capacity of flocculation and mixing tank.ⓘ Volume of Tank given Mass of Solids in Reactor [V]

⎘ Copy

👎

Formula

✖

Volume of Tank given Mass of Solids in Reactor

Formula

`"V" = "M"_{"s"}/"X"`

Example

`"0.004167m³"="5g"/"1200mg/L"`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Volume of Tank given Mass of Solids in Reactor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume of Tank = Mass of Solids/MLSS
V = M_s/X
This formula uses 3 Variables

Variables Used

Volume of Tank - (Measured in Cubic Meter) - Volume of tank is defined as the capacity of flocculation and mixing tank.
Mass of Solids - (Measured in Kilogram) - Mass of solids means the actuall weight of the solid particle present in the sewage.
MLSS - (Measured in Kilogram per Cubic Meter) - MLSS is the sum of volatile suspended solids (organics) and fixed suspended solids (inorganics).

STEP 1: Convert Input(s) to Base Unit

Mass of Solids: 5 Gram --> 0.005 Kilogram (Check conversion here)
MLSS: 1200 Milligram per Liter --> 1.2 Kilogram per Cubic Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V = M_s/X --> 0.005/1.2

Evaluating ... ...

V = 0.00416666666666667

STEP 3: Convert Result to Output's Unit

0.00416666666666667 Cubic Meter --> No Conversion Required

FINAL ANSWER

0.00416666666666667 ≈ 0.004167 Cubic Meter <-- Volume of Tank

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Sewage » Sludge Age » Volume of Aerator » Volume of Tank given Mass of Solids in Reactor

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 3 Volume of Aerator Calculators

Volume of Aerator given Specific Substrate Utilisation Rate Per Day

Go Volume of Tank = (Sewage Discharge*(Influent BOD-Effluent BOD))/(Specific Substrate Utilisation Rate*MLSS)

Volume of Aerator given Sludge Age

Go Volume of Tank = (Sludge Age*Mass of solids leaving the system)/MLSS

Volume of Tank given Mass of Solids in Reactor

Go Volume of Tank = Mass of Solids/MLSS

Volume of Tank given Mass of Solids in Reactor Formula

Volume of Tank = Mass of Solids/MLSS
V = M_s/X

What is MLSS ?

Mixed liquor suspended solids (MLSS) is the concentration of suspended solids, in an aeration tank during the activated sludge process, which occurs during the treatment of waste water.

How to Calculate Volume of Tank given Mass of Solids in Reactor?

Volume of Tank given Mass of Solids in Reactor calculator uses Volume of Tank = Mass of Solids/MLSS to calculate the Volume of Tank, Volume of Tank given Mass of Solids in Reactor calculates volume of tank when we have prior information of other parameters used. Volume of Tank is denoted by V symbol.

How to calculate Volume of Tank given Mass of Solids in Reactor using this online calculator? To use this online calculator for Volume of Tank given Mass of Solids in Reactor, enter Mass of Solids (M_s) & MLSS (X) and hit the calculate button. Here is how the Volume of Tank given Mass of Solids in Reactor calculation can be explained with given input values -> 0.004167 = 0.005/1.2.

FAQ

What is Volume of Tank given Mass of Solids in Reactor?

Volume of Tank given Mass of Solids in Reactor calculates volume of tank when we have prior information of other parameters used and is represented as V = M_s/X or Volume of Tank = Mass of Solids/MLSS. Mass of solids means the actuall weight of the solid particle present in the sewage & MLSS is the sum of volatile suspended solids (organics) and fixed suspended solids (inorganics).

How to calculate Volume of Tank given Mass of Solids in Reactor?

Volume of Tank given Mass of Solids in Reactor calculates volume of tank when we have prior information of other parameters used is calculated using Volume of Tank = Mass of Solids/MLSS. To calculate Volume of Tank given Mass of Solids in Reactor, you need Mass of Solids (M_s) & MLSS (X). With our tool, you need to enter the respective value for Mass of Solids & MLSS and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Volume of Tank?

In this formula, Volume of Tank uses Mass of Solids & MLSS. We can use 2 other way(s) to calculate the same, which is/are as follows -

Volume of Tank = (Sludge Age*Mass of solids leaving the system)/MLSS
Volume of Tank = (Sewage Discharge*(Influent BOD-Effluent BOD))/(Specific Substrate Utilisation Rate*MLSS)

Home

FREE PDFs

🔍 Search