Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester Calculator

✖BOD per day is defined as biological oxygen demand in terms of mass flow rate.ⓘ BOD per day [BOD_day]			+10% -10%
✖Volumetric loading is defined in terms of density.ⓘ Volumetric loading [V_l]			+10% -10%

✖Volumetric Flow Rate is the volume of fluid which passes per unit time.ⓘ Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester [V]

⎘ Copy

👎

Formula

✖

Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester

Formula

`"V" = ("BOD"_{"day"}/"V"_{"l"})`

Example

`"5.8E^-5m³/s"=("10kg/d"/"2kg/m³")`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volumetric Flow Rate = (BOD per day/Volumetric loading)
V = (BOD_day/V_l)
This formula uses 3 Variables

Variables Used

Volumetric Flow Rate - (Measured in Cubic Meter per Second) - Volumetric Flow Rate is the volume of fluid which passes per unit time.
BOD per day - (Measured in Kilogram per Second) - BOD per day is defined as biological oxygen demand in terms of mass flow rate.
Volumetric loading - (Measured in Kilogram per Cubic Meter) - Volumetric loading is defined in terms of density.

STEP 1: Convert Input(s) to Base Unit

BOD per day: 10 Kilogram per Day --> 0.000115740740740741 Kilogram per Second (Check conversion here)
Volumetric loading: 2 Kilogram per Cubic Meter --> 2 Kilogram per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V = (BOD_day/V_l) --> (0.000115740740740741/2)

Evaluating ... ...

V = 5.78703703703705E-05

STEP 3: Convert Result to Output's Unit

5.78703703703705E-05 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

5.78703703703705E-05 ≈ 5.8E-5 Cubic Meter per Second <-- Volumetric Flow Rate

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of an Anaerobic Digester » Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 20 Design of an Anaerobic Digester Calculators

Endogenous Coefficient given Quantity of Volatile Solids

Go Endogenous coefficient = (1/Mean Cell Residence Time)-(Yield coefficient*(BOD in-BOD out)/(Volatile Solids produced*Mean Cell Residence Time))

Mean Cell Residence Time given Quantity of Volatile Solids

Go Mean Cell Residence Time = (1/Endogenous coefficient)-(Yield coefficient*(BOD in-BOD out)/(Volatile Solids produced*Endogenous coefficient))

Yield Coefficient given Quantity of Volatile Solids

Go Yield coefficient = (Volatile Solids produced*(1-Mean Cell Residence Time*Endogenous coefficient))/(BOD in-BOD out)

Quantity of Volatile Solids Produced Each Day

Go Volatile Solids produced = (Yield coefficient*(BOD in-BOD out))/(1-Endogenous coefficient*Mean Cell Residence Time)

BOD Out given Quantity of Volatile Solids

Go BOD out = BOD in-(Volatile Solids produced/Yield coefficient)*(1-Endogenous coefficient*Mean Cell Residence Time)

BOD in given Quantity of Volatile Solids

Go BOD in = (Volatile Solids produced/Yield coefficient)*(1-Endogenous coefficient*Mean Cell Residence Time)+BOD out

Volatile Solids produced given Percent Stabilization

Go Volatile Solids produced = (1/1.42)*(BOD in-BOD out-((Percent stabilization*BOD in)/100))

BOD Out given Percent Stabilization

Go BOD out = (BOD in*100-142*Volatile Solids produced-Percent stabilization*BOD in)/100

Percent Stabilization

Go Percent stabilization = ((BOD in-BOD out-1.42*Volatile Solids produced)/BOD in)*100

BOD in given Percent Stabilization

Go BOD in = (BOD out*100+142*Volatile Solids produced)/(100-Percent stabilization)

Volatile Solids produced given Volume of Methane Gas produced

Go Volatile Solids produced = (1/1.42)*(BOD in-BOD out-(Volume of methane/5.62))

BOD Out given Volume of Methane Gas Produced

Go BOD out = (BOD in-(Volume of methane/5.62)-(1.42*Volatile Solids produced))

BOD in given Volume of Methane Gas Produced

Go BOD in = (Volume of methane/5.62)+BOD out+(1.42*Volatile Solids produced)

Volume of Methane Gas Produced at Standard Conditions

Go Volume of methane = 5.62*(BOD in-BOD out-1.42*Volatile Solids produced)

Influent Sludge Flow Rate given Volume Required for Anaerobic Digester

Go Influent Sludge Flow Rate = (Volume/Hydraulic retention time)

Hydraulic Retention Time given Volume Required for Anaerobic Digester

Go Hydraulic Retention Time = (Volume/Influent Sludge Flow Rate)

Volume Required for Anaerobic Digester

Go Volume = (Hydraulic retention time*Influent Sludge Flow Rate)

Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester

Go Volumetric Flow Rate = (BOD per day/Volumetric loading)

BOD Per Day given Volumetric Loading in Anaerobic Digester

Go BOD per day = (Volumetric loading*Volumetric Flow Rate)

Volumetric Loading in Anaerobic Digester

Go Volumetric loading = (BOD per day/Volumetric Flow Rate)

Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester Formula

Volumetric Flow Rate = (BOD per day/Volumetric loading)
V = (BOD_day/V_l)

What is volumetric flow rate ?

The volumetric flow rate (also known as volume flow rate, rate of fluid flow, or volume velocity) is the volume of fluid which passes per unit time; usually it is represented by the symbol Q (sometimes V̇). The SI unit is cubic metres per second (m3/s).

How to Calculate Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester?

Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester calculator uses Volumetric Flow Rate = (BOD per day/Volumetric loading) to calculate the Volumetric Flow Rate, The Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester calculates the volumetric flow rate when we know the other parameters. Volumetric Flow Rate is denoted by V symbol.

How to calculate Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester using this online calculator? To use this online calculator for Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester, enter BOD per day (BOD_day) & Volumetric loading (V_l) and hit the calculate button. Here is how the Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester calculation can be explained with given input values -> 5.8E-5 = (0.000115740740740741/2).

FAQ

What is Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester?

The Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester calculates the volumetric flow rate when we know the other parameters and is represented as V = (BOD_day/V_l) or Volumetric Flow Rate = (BOD per day/Volumetric loading). BOD per day is defined as biological oxygen demand in terms of mass flow rate & Volumetric loading is defined in terms of density.

How to calculate Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester?

The Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester calculates the volumetric flow rate when we know the other parameters is calculated using Volumetric Flow Rate = (BOD per day/Volumetric loading). To calculate Volumetric Flow Rate given Volumetric Loading in Anaerobic Digester, you need BOD per day (BOD_day) & Volumetric loading (V_l). With our tool, you need to enter the respective value for BOD per day & Volumetric loading and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search