Work Done Per Minute for Prony Brake Dynamometer Calculator

✖Torque Exerted on Wheel is described as the turning effect of force on the axis of rotation. In brief, it is a moment of force. It is characterized by τ.ⓘ Torque Exerted on Wheel [τ]			+10% -10%
✖Speed of shaft in rpm is the number of turns of the shaft divided by time, specified as revolutions per minute (rpm), cycles per second (cps), radians per second (rad/s), etc.ⓘ Speed of Shaft in RPM [N]			+10% -10%

✖Work done per minute is the that force acts upon an object while it is moving.ⓘ Work Done Per Minute for Prony Brake Dynamometer [w]

⎘ Copy

👎

Formula

✖

Work Done Per Minute for Prony Brake Dynamometer

Formula

`"w" = "τ"*2*pi*"N"`

Example

`"157079.6J"="50N*m"*2*pi*"500"`

Calculator

LaTeX

Reset

👍

Download Brakes and Dynamometers Formula PDF

Work Done Per Minute for Prony Brake Dynamometer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Work done per minute = Torque Exerted on Wheel*2*pi*Speed of Shaft in RPM
w = τ*2*pi*N
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Work done per minute - (Measured in Joule) - Work done per minute is the that force acts upon an object while it is moving.
Torque Exerted on Wheel - (Measured in Newton Meter) - Torque Exerted on Wheel is described as the turning effect of force on the axis of rotation. In brief, it is a moment of force. It is characterized by τ.
Speed of Shaft in RPM - Speed of shaft in rpm is the number of turns of the shaft divided by time, specified as revolutions per minute (rpm), cycles per second (cps), radians per second (rad/s), etc.

STEP 1: Convert Input(s) to Base Unit

Torque Exerted on Wheel: 50 Newton Meter --> 50 Newton Meter No Conversion Required
Speed of Shaft in RPM: 500 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = τ*2*pi*N --> 50*2*pi*500

Evaluating ... ...

w = 157079.63267949

STEP 3: Convert Result to Output's Unit

157079.63267949 Joule --> No Conversion Required

FINAL ANSWER

157079.63267949 ≈ 157079.6 Joule <-- Work done per minute

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Brakes and Dynamometers » Work Done » Work Done Per Minute for Prony Brake Dynamometer

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< 6 Work Done Calculators

Work Done Per Minute for Rope Brake Dynamometer

Go Work done per minute = (Dead Load-Spring Balance Reading)*pi*(Diameter of Wheel+Diameter of Rope)*Speed of Shaft in RPM

Work Done Per Minute for Belt Transmission Dynamometer

Go Work done per minute = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*pi*Diameter of the driving pulley*Speed of Shaft in RPM

Work Done Per Revolution for Rope Brake Dynamometer

Go Work = (Dead Load-Spring Balance Reading)*pi*(Diameter of Wheel+Diameter of Rope)

Work Done in One Revolution for Belt Transmission Dynamometer

Go Work = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*pi*Diameter of the driving pulley

Work Done Per Minute for Prony Brake Dynamometer

Go Work done per minute = Torque Exerted on Wheel*2*pi*Speed of Shaft in RPM

Work Done in One Revolution for Prony Brake Dynamometer

Go Work = Torque Exerted on Wheel*2*pi

Work Done Per Minute for Prony Brake Dynamometer Formula

Work done per minute = Torque Exerted on Wheel*2*pi*Speed of Shaft in RPM
w = τ*2*pi*N

What is prony brake dynamometer?

A dynamometer is a device used for measuring the power transmitted by a rotating shaft. The Prony Brake is an early dynamometer developed by Prony in the early 1800s. It is composed of brake blocks that press against the rotating wheel attached to the motor.

How to Calculate Work Done Per Minute for Prony Brake Dynamometer?

Work Done Per Minute for Prony Brake Dynamometer calculator uses Work done per minute = Torque Exerted on Wheel*2*pi*Speed of Shaft in RPM to calculate the Work done per minute, The Work done per minute for prony brake dynamometer formula is defined as a force that acts upon an object while it is moving. Work done per minute is denoted by w symbol.

How to calculate Work Done Per Minute for Prony Brake Dynamometer using this online calculator? To use this online calculator for Work Done Per Minute for Prony Brake Dynamometer, enter Torque Exerted on Wheel (τ) & Speed of Shaft in RPM (N) and hit the calculate button. Here is how the Work Done Per Minute for Prony Brake Dynamometer calculation can be explained with given input values -> 157079.6 = 50*2*pi*500.

FAQ

What is Work Done Per Minute for Prony Brake Dynamometer?

The Work done per minute for prony brake dynamometer formula is defined as a force that acts upon an object while it is moving and is represented as w = τ*2*pi*N or Work done per minute = Torque Exerted on Wheel*2*pi*Speed of Shaft in RPM. Torque Exerted on Wheel is described as the turning effect of force on the axis of rotation. In brief, it is a moment of force. It is characterized by τ & Speed of shaft in rpm is the number of turns of the shaft divided by time, specified as revolutions per minute (rpm), cycles per second (cps), radians per second (rad/s), etc.

How to calculate Work Done Per Minute for Prony Brake Dynamometer?

The Work done per minute for prony brake dynamometer formula is defined as a force that acts upon an object while it is moving is calculated using Work done per minute = Torque Exerted on Wheel*2*pi*Speed of Shaft in RPM. To calculate Work Done Per Minute for Prony Brake Dynamometer, you need Torque Exerted on Wheel (τ) & Speed of Shaft in RPM (N). With our tool, you need to enter the respective value for Torque Exerted on Wheel & Speed of Shaft in RPM and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Work done per minute?

In this formula, Work done per minute uses Torque Exerted on Wheel & Speed of Shaft in RPM. We can use 2 other way(s) to calculate the same, which is/are as follows -

Work done per minute = (Dead Load-Spring Balance Reading)*pi*(Diameter of Wheel+Diameter of Rope)*Speed of Shaft in RPM
Work done per minute = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*pi*Diameter of the driving pulley*Speed of Shaft in RPM

Home

FREE PDFs

🔍 Search