Working Time given Production Required Solution

STEP 0: Pre-Calculation Summary
Formula Used
Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production)
thr = (Bsp/Ps)
This formula uses 3 Variables
Variables Used
Time in Scraper Production in Hour - (Measured in Second) - Time in Scraper Production in Hour is the continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future in hour.
Bank in Scraper Production - (Measured in Cubic Meter) - Bank in Scraper Production is computed in terms of volume.
Production Required in Scraper Production - (Measured in Cubic Meter per Second) - Production Required in Scraper Production is the amount of scrap produced.
STEP 1: Convert Input(s) to Base Unit
Bank in Scraper Production: 184 Cubic Meter --> 184 Cubic Meter No Conversion Required
Production Required in Scraper Production: 75 Cubic Meter per Hour --> 0.0208333333333333 Cubic Meter per Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
thr = (Bsp/Ps) --> (184/0.0208333333333333)
Evaluating ... ...
thr = 8832.00000000001
STEP 3: Convert Result to Output's Unit
8832.00000000001 Second -->2.45333333333334 Hour (Check conversion here)
FINAL ANSWER
2.45333333333334 2.453333 Hour <-- Time in Scraper Production in Hour
(Calculation completed in 00.020 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

25 Scraper Production Calculators

Speed at Haul and Return in Miles per Hour given Variable Time
Go Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production)
Variable Time when Haul and Return Distance is in Feet
Go Variable Time in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Speed in Miles per Hour in Scraper Production)
Return Distance in Feet given Variable Time
Go Return Distance in Foot in Scraper Production = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Haul Distance in Feet
Haul Distance in Feet given Variable Time
Go Haul Distance in Feet = (Variable Time in Scraper Production*88*Speed in Miles per Hour in Scraper Production)-Return Distance in Foot in Scraper Production
Speed at Haul and Return in Kilometer per Hour given Variable Time
Go Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production)
Return Distance in Meter given Variable Time
Go Return Distance in Meter = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Haul Distance
Haul Distance in Meter given Variable Time
Go Haul Distance = (Variable Time in Scraper Production*16.7*Speed in Kmph in Scraper Production)-Return Distance in Meter
Production Required to Determine Number of Scrapers
Go Production Required in Scraper Production = (Bank in Scraper Production/Time in Scraper Production in Hour)
Working Time given Production Required
Go Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production)
Quantity given Production Required
Go Bank in Scraper Production = (Production Required in Scraper Production*Time in Scraper Production in Hour)
Production Required given Number of Scrapers Needed for Job
Go Production Required in Scraper Production = Number of Scraper in Scraper Production*Production per Unit
Trips per Hour given Production of Scrap by Machines
Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)
Load Given Production of Scrap by Machines
Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)
Production of Scrap by Machines
Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)
Number of Scrapers Needed for Job
Go Number of Scraper = (Production Required in Scraper Production/Production per Unit)
Density of Material given Quantity of Scrap Produced
Go Density of Material in Scraper Production = (Weight of Load Scrap/Bank in Scraper)
Weight of Load Given Quantity of Scrap Produced
Go Weight of Load Scrap = (Bank in Scraper*Density of Material in Scraper Production)
Bank or Quantity of Scrap Produced
Go Bank in Scraper = (Weight of Load Scrap/Density of Material in Scraper Production)
Scraper Cycle Time given Number of Scrapers Pusher can Load
Go Scraper Cycle Time = (Number of Scraper a Pusher*Pusher Cycle Time)
Pusher Cycle Time given Number of Scrapers Pusher can Load
Go Pusher Cycle Time = (Scraper Cycle Time/Number of Scraper a Pusher)
Number of Scrapers Pusher can Load
Go Number of Scraper a Pusher = (Scraper Cycle Time/Pusher Cycle Time)
Working Time given Trips per Hour for Excavating Scrap
Go Working Time in Scraper Production = (Trips per Hour*Cycle Time)
Cycle Time given Trips per Hour for Excavating Scrap
Go Cycle Time = (Working Time in Scraper Production/Trips per Hour)
Trips per Hour for Excavating Scrap
Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)
Production per Unit Given Number of Scrapers Needed for Job
Go Production per Unit = (Production Required/Number of Scraper)

Working Time given Production Required Formula

Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production)
thr = (Bsp/Ps)

What is Working Time?

Working time is the period of time that a person spends at paid labor. Unpaid labor such as personal housework or caring for children or pets is not considered part of the working week.

How to Calculate Working Time given Production Required?

Working Time given Production Required calculator uses Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production) to calculate the Time in Scraper Production in Hour, The Working Time given Production Required is defined as the duration of work when volume of scrap and production is known. Time in Scraper Production in Hour is denoted by thr symbol.

How to calculate Working Time given Production Required using this online calculator? To use this online calculator for Working Time given Production Required, enter Bank in Scraper Production (Bsp) & Production Required in Scraper Production (Ps) and hit the calculate button. Here is how the Working Time given Production Required calculation can be explained with given input values -> 0.000681 = (184/0.0208333333333333).

FAQ

What is Working Time given Production Required?
The Working Time given Production Required is defined as the duration of work when volume of scrap and production is known and is represented as thr = (Bsp/Ps) or Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production). Bank in Scraper Production is computed in terms of volume & Production Required in Scraper Production is the amount of scrap produced.
How to calculate Working Time given Production Required?
The Working Time given Production Required is defined as the duration of work when volume of scrap and production is known is calculated using Time in Scraper Production in Hour = (Bank in Scraper Production/Production Required in Scraper Production). To calculate Working Time given Production Required, you need Bank in Scraper Production (Bsp) & Production Required in Scraper Production (Ps). With our tool, you need to enter the respective value for Bank in Scraper Production & Production Required in Scraper Production and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!