Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given Calculator

Main Category	Engineering ↺
Engineering	Civil ↺
Civil	Hydraulics and Waterworks ↺
Hydraulics and Waterworks	Flow Over Notches and Weirs ↺
Flow Over Notches and Weirs	Flow Over a Rectangular Sharp-Crested Weir or Notch ↺

✖Discharge is the rate of flow of a liquidⓘ Discharge [Q]			+10% -10%
✖The coefficient of discharge rectangular portion is considered in discharge through the trapezoidal notch.ⓘ coefficient of discharge rectangular [C d1]			+10% -10%
✖Length is the measurement or extent of something from end to end.ⓘ Length [l]			+10% -10%
✖number of end contractions can be described as the end contractions acting on a channelⓘ number of end contractions [_n]			+10% -10%
✖head1 can be described as the addition of head and additional head.ⓘ head1 [_H1]			+10% -10%
✖additional head is the applied head due to the velocity of approachⓘ additional head [_ha]			+10% -10%

✖The Acceleration Due To Gravity is acceleration gained by an object because of gravitational force.ⓘ Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given [g]

⎘ Copy

👎

Formula

Reset

👍

Credits

M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1000+ more calculators!

Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given Solution

STEP 0: Pre-Calculation Summary

Formula Used

acceleration_due_to_gravity = (3*Discharge)/(2*coefficient of Discharge rectangular*(Length-0.1*number of end contractions*head1)*(head1^(3/2)-additional head^(3/2)))^2*(1/2)
g = (3*Q)/(2*C d1*(l-0.1*_n*_H1)*(_H1^(3/2)-_ha^(3/2)))^2*(1/2)
This formula uses 6 Variables

Variables Used

Discharge - Discharge is the rate of flow of a liquid (Measured in Meter³ per Second)
coefficient of discharge rectangular- The coefficient of discharge rectangular portion is considered in discharge through the trapezoidal notch.
Length - Length is the measurement or extent of something from end to end. (Measured in Meter)
number of end contractions- number of end contractions can be described as the end contractions acting on a channel
head1 - head1 can be described as the addition of head and additional head. (Measured in Meter)
additional head - additional head is the applied head due to the velocity of approach (Measured in Meter)

STEP 1: Convert Input(s) to Base Unit

Discharge: 1 Meter³ per Second --> 1 Meter³ per Second No Conversion Required
coefficient of discharge rectangular: 0.63 --> No Conversion Required
Length: 3 Meter --> 3 Meter No Conversion Required
number of end contractions: 5 --> No Conversion Required
head1: 10 Meter --> 10 Meter No Conversion Required
additional head: 50 Meter --> 50 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

g = (3*Q)/(2*C d1*(l-0.1*_n*_H1)*(_H1^(3/2)-_ha^(3/2)))^2*(1/2) --> (3*1)/(2*0.63*(3-0.1*5*10)*(10^(3/2)-50^(3/2)))^2*(1/2)

Evaluating ... ...

g = 2.27911175831379E-06

STEP 3: Convert Result to Output's Unit

2.27911175831379E-06 Meter per Square Second --> No Conversion Required

FINAL ANSWER

2.27911175831379E-06 Meter per Square Second <-- Acceleration Due To Gravity

(Calculation completed in 00.047 seconds)

You are here

< 11 Other formulas that you can solve using the same Inputs

Surface Area of a Rectangular Prism

surface_area = 2*(Length*Width+Length*Height+Width*Height) Go

Magnetic Flux

magnetic_flux = Magnetic Field*Length*Breadth*cos(θ) Go

Perimeter of a rectangle when diagonal and length are given

perimeter = 2*(Length+sqrt((Diagonal)^2-(Length)^2)) Go

Diagonal of a Rectangle when length and area are given

diagonal = sqrt(((Area)^2/(Length)^2)+(Length)^2) Go

Area of a Rectangle when length and diagonal are given

area = Length*(sqrt((Diagonal)^2-(Length)^2)) Go

Diagonal of a Rectangle when length and breadth are given

diagonal = sqrt(Length^2+Breadth^2) Go

Volume of a Rectangular Prism

volume = Width*Height*Length Go

Strain

strain = Change In Length/Length Go

Surface Tension

surface_tension = Force/Length Go

Perimeter of a rectangle when length and width are given

perimeter = 2*Length+2*Width Go

Area of a Rectangle when length and breadth are given

area = Length*Breadth Go

< 11 Other formulas that calculate the same Output

Acceleration Due to Gravity when Self Cleansing Velocity is Given

acceleration_due_to_gravity = ((Self cleansing velocity)^2*Friction factor)/(8*Constant*Diameter of the grain*(Specific gravity of sediment-1)) Go

Acceleration Due to Gravity when Settling Velocity within Transition Zone is Given

acceleration_due_to_gravity = (Settling velocity)^(1/0.714)/((Specific gravity of sediment-1)*(Diameter )^(1.6))/(13.88*(Kinematic viscosity )^(0.6)) Go

Acceleration due to gravity when area for siphon throat is given

acceleration_due_to_gravity = (Volume flow rate/(coefficient of discharging*area for siphon throat))^(2)*(1/(2*head of the liquid)) Go

Acceleration due to Gravity when Time Period is given

acceleration_due_to_gravity = (Radius of gyration^2/((Time Period Of Progressive Wave/2*pi)^2)*Distance between point B and G) Go

Acceleration Due to Gravity when Settling Velocity is Given

acceleration_due_to_gravity = (Settling velocity)^2/(((4/3)*(Specific gravity of sediment-1)*Diameter )/coefficient of drag) Go

Acceleration Due to Gravity when Maximum Critical Scour Velocity is Given

acceleration_due_to_gravity = (Maximum critical scour velocity/(4.5*sqrt(Diameter *(Specific gravity of particle-1))))^2 Go

Acceleration Due to Gravity when Minimum Critical Scour Velocity is Given

acceleration_due_to_gravity = (Minimum critical scour velocity/(3*sqrt(Diameter *(Specific gravity of particle-1))))^2 Go

Acceleration Due to Gravity when Settling Velocity for Turbulent Settling is Given

acceleration_due_to_gravity = (Settling velocity/(1.8*sqrt((Specific gravity of sediment-1)*Diameter )))^2 Go

Acceleration due to gravity when inlet capacity for flow depth more than 1ft 5in is given

acceleration_due_to_gravity = ((inlet capacity/(0.6*Area))^2)*(1/(2*Depth)) Go

Acceleration Due to Gravity when Head Loss is Given

acceleration_due_to_gravity = (0.1*(critical velocity)^2/(2*Head loss)) Go

Acceleration Due to Gravity when Critical Depth in the Control Section is Given

acceleration_due_to_gravity = ((critical velocity)^2/critical depth) Go

Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given Formula

What is Coefficient of Discharge?

Discharge Coefficient is the ratio of actual discharge through a nozzle or orifice to the theoretical discharge.

How to Calculate Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given?

Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given calculator uses acceleration_due_to_gravity = (3*Discharge)/(2*coefficient of Discharge rectangular*(Length-0.1*number of end contractions*head1)*(head1^(3/2)-additional head^(3/2)))^2*(1/2) to calculate the Acceleration Due To Gravity, The Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given is the acceleration of a body in free fall under the influence of earth's gravity expressed as the rate of increase of velocity per unit of time. Acceleration Due To Gravity and is denoted by g symbol.

How to calculate Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given using this online calculator? To use this online calculator for Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given, enter Discharge (Q), coefficient of discharge rectangular (C d1), Length (l), number of end contractions (_n), head1 (_H1) and additional head (_ha) and hit the calculate button. Here is how the Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given calculation can be explained with given input values -> 2.279E-6 = (3*1)/(2*0.63*(3-0.1*5*10)*(10^(3/2)-50^(3/2)))^2*(1/2).

FAQ

What is Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given?

The Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given is the acceleration of a body in free fall under the influence of earth's gravity expressed as the rate of increase of velocity per unit of time and is represented as g = (3*Q)/(2*C d1*(l-0.1*_n*_H1)*(_H1^(3/2)-_ha^(3/2)))^2*(1/2) or acceleration_due_to_gravity = (3*Discharge)/(2*coefficient of Discharge rectangular*(Length-0.1*number of end contractions*head1)*(head1^(3/2)-additional head^(3/2)))^2*(1/2). Discharge is the rate of flow of a liquid, The coefficient of discharge rectangular portion is considered in discharge through the trapezoidal notch, Length is the measurement or extent of something from end to end, number of end contractions can be described as the end contractions acting on a channel, head1 can be described as the addition of head and additional head and additional head is the applied head due to the velocity of approach.

How to calculate Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given?

The Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given is the acceleration of a body in free fall under the influence of earth's gravity expressed as the rate of increase of velocity per unit of time is calculated using acceleration_due_to_gravity = (3*Discharge)/(2*coefficient of Discharge rectangular*(Length-0.1*number of end contractions*head1)*(head1^(3/2)-additional head^(3/2)))^2*(1/2). To calculate Acceleration Due to Gravity(g) when Discharge (Q) if the Velocity Considered is given, you need Discharge (Q), coefficient of discharge rectangular (C d1), Length (l), number of end contractions (_n), head1 (_H1) and additional head (_ha). With our tool, you need to enter the respective value for Discharge, coefficient of discharge rectangular, Length, number of end contractions, head1 and additional head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Acceleration Due To Gravity?

In this formula, Acceleration Due To Gravity uses Discharge, coefficient of discharge rectangular, Length, number of end contractions, head1 and additional head. We can use 11 other way(s) to calculate the same, which is/are as follows -

acceleration_due_to_gravity = ((inlet capacity/(0.6*Area))^2)*(1/(2*Depth))
acceleration_due_to_gravity = (Volume flow rate/(coefficient of discharging*area for siphon throat))^(2)*(1/(2*head of the liquid))
acceleration_due_to_gravity = ((Self cleansing velocity)^2*Friction factor)/(8*Constant*Diameter of the grain*(Specific gravity of sediment-1))
acceleration_due_to_gravity = (Radius of gyration^2/((Time Period Of Progressive Wave/2*pi)^2)*Distance between point B and G)
acceleration_due_to_gravity = (Settling velocity)^2/(((4/3)*(Specific gravity of sediment-1)*Diameter )/coefficient of drag)
acceleration_due_to_gravity = (Settling velocity)^(1/0.714)/((Specific gravity of sediment-1)*(Diameter )^(1.6))/(13.88*(Kinematic viscosity )^(0.6))
acceleration_due_to_gravity = (Settling velocity/(1.8*sqrt((Specific gravity of sediment-1)*Diameter )))^2
acceleration_due_to_gravity = (Minimum critical scour velocity/(3*sqrt(Diameter *(Specific gravity of particle-1))))^2
acceleration_due_to_gravity = (Maximum critical scour velocity/(4.5*sqrt(Diameter *(Specific gravity of particle-1))))^2
acceleration_due_to_gravity = (0.1*(critical velocity)^2/(2*Head loss))
acceleration_due_to_gravity = ((critical velocity)^2/critical depth)

Facebook
Twitter
WhatsApp
Reddit
LinkedIn
E-Mail

Let Others Know

✖

Facebook

Twitter

Copied!